Eric Lee / smarc-uboot

16 Aug, 2017

2 commits

28 May, 2015

1 commit

  • 062f94f05   net: Fix a warning added by 76ec988 ... Browse Code »

    arm: + lsxhl
    w+board/buffalo/lsxl/lsxl.c: In function 'rescue_mode':
    w+board/buffalo/lsxl/lsxl.c:230:8: warning: unused variable 'enetaddr' [-Wunused-variable]
    arm: + lschlv2
    w+board/buffalo/lsxl/lsxl.c: In function 'rescue_mode':
    w+board/buffalo/lsxl/lsxl.c:230:8: warning: unused variable 'enetaddr' [-Wunused-variable]

    Remove the unused variable.

    Signed-off-by: Joe Hershberger

    Joe Hershberger
     

21 May, 2015

1 commit

  • 76ec988b0   net: Remove all calls to net_random_ethaddr() ... Browse Code »
    76

    Remove the calls to net_random_ethaddr() that some boards and some
    drivers are calling. This is now implemented inside of net/eth.c

    Enable the feature for all boards that previously enabled it.

    Signed-off-by: Joe Hershberger
    Acked-By: Michael Walle (for the lsxl board part)

    Series-changes: 2
    -Fixed bfin build errors

    Joe Hershberger
     

19 Apr, 2015

1 commit

16 Feb, 2015

1 commit

  • 43730ba72   lsxl: add a README file ... Browse Code »

    The README describes the recovery method which can be used if the NAS box
    is not reachable anymore. Addionally, it describes the different boot
    scripts.

    Signed-off-by: Michael Walle

    Michael Walle
     

23 Oct, 2014

4 commits

14 Sep, 2014

1 commit

  • 461be2f96   kconfig: remove redundant "string" type in arch and board Kconfigs ... Browse Code »
    43

    Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}
    are specified in arch/Kconfig.

    We can delete the ones in arch and board Kconfig files.

    This commit can be easily reproduced by the following command:

    find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '
    /config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ {
    N
    s/\n[[:space:]]*string//
    }
    '

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

31 Aug, 2014

1 commit

30 Jul, 2014

2 commits

  • 93d4334f7   Add board MAINTAINERS files ... Browse Code »

    We have switched to Kconfig and the boards.cfg file is going to
    be removed. We have to retrieve the board status and maintainers
    information from it.

    The MAINTAINERS format as in Linux Kernel would be nice
    because we can crib the scripts/get_maintainer.pl script.

    After some discussion, we chose to put a MAINTAINERS file under each
    board directory, not the top-level one because we want to collect
    relevant information for a board into a single place.

    TODO:
    Modify get_maintainer.pl to scan multiple MAINTAINERS files.

    Signed-off-by: Masahiro Yamada
    Suggested-by: Tom Rini
    Acked-by: Simon Glass

    Masahiro Yamada
     
  • dd84058d2   kconfig: add board Kconfig and defconfig files ... Browse Code »

    This commit adds:
    - arch/${ARCH}/Kconfig
    provide a menu to select target boards
    - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
    - configs/${TARGET_BOARD}_defconfig
    default setting of each board

    (This commit was automatically generated by a conversion script
    based on boards.cfg)

    In Linux Kernel, defconfig files are located under
    arch/${ARCH}/configs/ directory.
    It works in Linux Kernel since ARCH is always given from the
    command line for cross compile.

    But in U-Boot, ARCH is not given from the command line.
    Which means we cannot know ARCH until the board configuration is done.
    That is why all the "*_defconfig" files should be gathered into a
    single directory ./configs/.

    Signed-off-by: Masahiro Yamada
    Acked-by: Simon Glass

    Masahiro Yamada
     

13 May, 2014

1 commit

  • da384a9d7   net: rename and refactor eth_rand_ethaddr() function ... Browse Code »
    12

    Some functions in include/net.h are ported from
    include/linux/etherdevice.h of Linux Kernel.

    For ex.
    is_zero_ether_addr()
    is_multicast_ether_addr()
    is_broadcast_ether_addr()
    is_valid_ether_addr();

    So, we should use the same function name as that of Linux Kernel,
    eth_rand_addr(), for consistency.

    Besides, eth_rand_addr() has been implemented as an inline function.
    So it should not be surrounded by #ifdef CONFIG_RANDOM_MACADDR.

    Signed-off-by: Masahiro Yamada
    Acked-by: Joe Hershberger

    Masahiro Yamada
     

01 Nov, 2013

1 commit

24 Jul, 2013

1 commit

10 May, 2013

1 commit

  • b1e6c4c3d   Fix references to the documentation files ... Browse Code »

    Many boot image configuration files refer to the
    appropriate documentation file, but these references
    contain typos in the directory and file name. Fix
    them. Also fix reference to doc/README.SPL file.

    Signed-off-by: Anatolij Gustschin
    Cc: Prafulla Wadaskar
    Cc: Stefano Babic
    Acked-by: Stefano Babic

    Anatolij Gustschin
     

09 Jan, 2013

2 commits

  • 23c9946a3   lsxl: unset ncip for rescue mode ... Browse Code »

    Instead of using the serverip we get from the DHCP server, implicitly use
    the broadcast address, which is automatically set when no ncip environment
    variable is set. That way it isn't necessary to use a special DHCP
    configuration to set the netconsole peer.

    Signed-off-by: Michael Walle
    Cc: Prafulla Wadaskar

    Michael Walle
     
  • 9d86f0c30   kirkwood: make MPP arrays static const ... Browse Code »

    This saves stack and code memory for local copy, and
    consumes initialized data memory. For 22 of the 29
    kirkwood-based boards, this results in a global saving
    of about 30 bytes. For 7 of them, it results in an
    increase of 6 to 14 bytes.

    Signed-off-by: Albert ARIBAUD

    Albert ARIBAUD
     

03 Oct, 2012

1 commit

03 Sep, 2012

1 commit

  • a9f1a4893   lsxl: support power switch ... Browse Code »

    This patch restores the Linkstation's original behaviour when powering off.
    Once the (soft) power switch is turned off, linux will reboot and the
    bootloader turns off HDD and USB power. Then it loops as long as the switch
    is in the off position, before continuing the boot process again.

    Additionally, this patch fixes the board function set_led(LED_OFF).

    Signed-off-by: Michael Walle
    Cc: Prafulla Wadaskar

    Michael Walle
     

07 Jul, 2012

1 commit