Eric Lee / smarc-uboot

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

19 Dec, 2017

1 commit

13 Dec, 2017

1 commit

07 Dec, 2017

1 commit

  • aba392492   sunxi: Fix A20-OLinuXino-MICRO LAN8710 support ... Browse Code »

    >From revision J the board uses new phy chip LAN8710. Compared
    with RTL8201, RA17 pin is TXERR. It has pullup which causes phy
    not to work. To fix this PA17 is muxed with GMAC function. This
    makes the pin output-low.

    Signed-off-by: Stefan Mavrodiev
    Acked-by: Maxime Ripard
    Reviewed-by: Jagan Teki

    Stefan Mavrodiev
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

02 Sep, 2017

1 commit

  • ecad7051b   configs: Migrate all of the existing USB symbols, except fastboot ... Browse Code »
    20

    This syncs all of the currently Kconfig'd symbols out of the headers and
    into the defconfig files. This has two exceptions, first am335x_evm
    needs to be converted to DM in SPL and then it can stop undef'ing
    CONFIG_DM_USB. Leaving this as-is results in a build failure, and
    without work, run time failure. The other case is am43xx_evm.h and in
    turn am43xx_evm_usbhost_boot. The problem here is that we need DWC3 USB
    host mode in SPL, but still desire to have gadget mode in U-Boot proper.

    Signed-off-by: Tom Rini

    Tom Rini
     

11 Aug, 2017

1 commit

12 Jul, 2017

1 commit

01 May, 2017

1 commit

20 Apr, 2017

2 commits

26 Mar, 2017

1 commit

14 Mar, 2017

1 commit

28 Jan, 2017

3 commits

30 Dec, 2016

1 commit

29 Nov, 2016

1 commit

17 Sep, 2016

2 commits

09 Sep, 2016

1 commit

17 Jun, 2016

1 commit

10 Jun, 2016

1 commit

25 May, 2016

2 commits

26 Apr, 2016

3 commits

12 Apr, 2016

1 commit

  • 88bb800dd   sunxi: Enable CMD_GPIO on all sunxi boards ... Browse Code »

    We have CONFIG_CMD_GPIO=y in almost all sunxi boards, but after
    its Kconfig conversion it has ended up missing on some recently
    added boards.

    Simply select it for ARCH_SUNXI, so that we get it on all
    sunxi boards for both a consistent user experience and simpler
    defconfig files.

    Signed-off-by: Hans de Goede
    Acked-by: Ian Campbell

    Hans de Goede
     

24 Mar, 2016

1 commit

  • d75111a79   sunxi: Select CONFIG_OF_BOARD_SETUP from arch/arm/Kconfig ... Browse Code »

    Always select OF_BOARD_SETUP on sunxi, rather then having it in almost
    all our defconfigs. This also fixes it missing from some recently
    added defconfigs.

    This commit also modifies our ft_board_setup() to not cause warnings
    when CONFIG_VIDEO_DT_SIMPLEFB is not set, since we will now always
    build it.

    Signed-off-by: Hans de Goede
    Acked-by: Ian Campbell

    Hans de Goede
     

15 Mar, 2016

1 commit

  • 73223f0e1   Kconfig: Move CONFIG_FIT and related options to Kconfig ... Browse Code »

    There are already two FIT options in Kconfig but the CONFIG options are
    still in the header files. We need to do a proper move to fix this.

    Move these options to Kconfig and tidy up board configuration:

    CONFIG_FIT
    CONFIG_OF_BOARD_SETUP
    CONFIG_OF_SYSTEM_SETUP
    CONFIG_FIT_SIGNATURE
    CONFIG_FIT_BEST_MATCH
    CONFIG_FIT_VERBOSE
    CONFIG_OF_STDOUT_VIA_ALIAS
    CONFIG_RSA

    Unfortunately the first one is a little complicated. We need to make sure
    this option is not enabled in SPL by this change. Also this option is
    enabled automatically in the host builds by defining CONFIG_FIT in the
    image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
    be used in files that are built on the host but must also build for U-Boot
    and SPL.

    Note: Masahiro's moveconfig.py script is amazing.

    Signed-off-by: Simon Glass
    [trini: Add microblaze change, various configs/ re-applies]
    Signed-off-by: Tom Rini

    Simon Glass
     

10 Dec, 2015

1 commit

22 Nov, 2015

1 commit

19 Nov, 2015

1 commit

21 Oct, 2015

1 commit

  • 1df44814f   sunxi: Kconfig-ify CONFIG_AXP152_POWER and _AXP209_POWER ... Browse Code »

    Kconfig-ify CONFIG_AXP152_POWER and _AXP209_POWER settings, removing
    them from CONFIG_SYS_EXTRA_OPTIONS.

    Note that sun5i boards can have either an AXP209 or an AXP152 pmic, the
    Kconfig default is AXP209, boards with an AXP152 must explicitly select
    this. Likewise boards without a pmic must explicitly select SUNXI_NO_PMIC
    in their defconfig.

    Signed-off-by: Hans de Goede
    Acked-by: Ian Campbell

    Hans de Goede
     

25 Jul, 2015

1 commit

  • 453688271   sunxi: Update selects in arch/arm/Kconfig for DM conversions ... Browse Code »

    With certain features being convert to DM now we want sunxi to default
    to having DM enabled for ETH/SERIAL and USB in some cases.

    Cc: Hans de Goede
    Cc: Ian Campbell
    Signed-off-by: Tom Rini
    [hdegoede@redhat.com: Also select CONFIG_USB for all sunxi builds]
    Signed-off-by: Hans de Goede
    Acked-by: Ian Campbell
    Reviewed-by: Simon Glass

    Tom Rini
     

26 Jun, 2015

2 commits

  • ef0f2f575   Move defaults from config_cmd_default.h to Kconfig ... Browse Code »

    This sets the default commands Kconfig to match
    include/config_cmd_default.h commands in the common/Kconfig and removes
    them from include/configs.

    Signed-off-by: Joe Hershberger
    [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
    Signed-off-by: Tom Rini

    Joe Hershberger
     
  • c9bb942e2   Move default y configs out of arch/board Kconfig ... Browse Code »

    Some archs/boards specify their own default by pre-defining the config
    which causes the Kconfig system to mix up the order of the configs in
    the defconfigs... This will cause merge pain if allowed to proliferate.

    Remove the configs that behave this way from the archs.

    A few configs still remain, but that is because they only exist as
    defaults and do not have a proper Kconfig entry. Those appear to be:

    SPIFLASH
    DISPLAY_BOARDINFO

    Signed-off-by: Joe Hershberger
    [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates,
    drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM]
    Signed-off-by: Tom Rini

    Joe Hershberger
     

06 Jun, 2015

1 commit