Eric Lee / smarc-uboot

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

17 Oct, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

29 Sep, 2017

1 commit

15 Sep, 2017

1 commit

28 Aug, 2017

1 commit

27 Aug, 2017

1 commit

15 Aug, 2017

2 commits

01 Aug, 2017

1 commit

  • 8f1a80e99   configs: Migrate CMD_NAND* ... Browse Code »

    Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS
    CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the
    defconfig files.

    Tested-by: Adam Ford
    Signed-off-by: Tom Rini
    Reviewed-by: Bin Meng

    Tom Rini
     

31 Jul, 2017

1 commit

26 Jul, 2017

1 commit

19 Jun, 2017

1 commit

04 Jun, 2017

1 commit

  • 91d27a17c   Kconfig: Migrate FS_FAT / FAT_WRITE ... Browse Code »

    Now that these symbols are in Kconfig, migrate all users. Use imply on
    a number of platforms that default to having this enabled. As part of
    this we must migrate some straglers for CMD_FAT and DOS_PARTITION.

    Signed-off-by: Tom Rini

    Tom Rini
     

10 May, 2017

2 commits

24 Oct, 2016

2 commits

12 Oct, 2016

1 commit

27 Sep, 2016

1 commit

10 Sep, 2016

1 commit

10 Jun, 2016

1 commit

26 Apr, 2016

3 commits

15 Mar, 2016

1 commit

25 Nov, 2015

1 commit

28 Sep, 2015

1 commit

13 Aug, 2015

1 commit

  • 181bd9dc6   kconfig: add config option for shell prompt ... Browse Code »
    102

    Add option to set shell prompt string from menuconfig and migrate
    boards globally.

    The migration is done as follows:
    - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the
    entry moved to their defconfig files.
    - Boards that defined some kind of #ifdef logic which selects the
    CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT
    right before the #ifdef logic and were left alone.
    - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus
    CONFIG_SYS_PROMPT was removed from all _common.h and _common.h
    files. This results in a streamlined default value across platforms, and
    includes the following files: spear-common, sunxi-common, mv-common,
    ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common.
    - Boards that relied on _common.h values of CONFIG_SYS_PROMPT were
    not updated in their respective defconfig files under the assumption that
    since they did not explicitly define a value, they're fine with whatever
    the default is.
    - On the other hand, boards that relied on a value defined in some
    _common.h file such as woodburn_common, rpi-common,
    bur_am335x_common, ls2085a_common, siemens_am33x_common, and
    omap3_evm_common, had their values moved to the respective defconfig files.
    - The define V_PROMPT was removed, since it is not used anywhere except for
    assigning a value for CONFIG_SYS_PROMPT.

    Cc: Tom Rini
    Cc: Masahiro Yamada
    Cc: Stefano Babic
    Cc: Igor Grinberg
    Signed-off-by: Nikita Kiryanov
    [trini: Add spring, sniper, smartweb to conversion]
    Signed-off-by: Tom Rini

    Nikita Kiryanov
     

26 Jun, 2015

2 commits

  • ef0f2f575   Move defaults from config_cmd_default.h to Kconfig ... Browse Code »

    This sets the default commands Kconfig to match
    include/config_cmd_default.h commands in the common/Kconfig and removes
    them from include/configs.

    Signed-off-by: Joe Hershberger
    [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
    Signed-off-by: Tom Rini

    Joe Hershberger
     
  • c9bb942e2   Move default y configs out of arch/board Kconfig ... Browse Code »

    Some archs/boards specify their own default by pre-defining the config
    which causes the Kconfig system to mix up the order of the configs in
    the defconfigs... This will cause merge pain if allowed to proliferate.

    Remove the configs that behave this way from the archs.

    A few configs still remain, but that is because they only exist as
    defaults and do not have a proper Kconfig entry. Those appear to be:

    SPIFLASH
    DISPLAY_BOARDINFO

    Signed-off-by: Joe Hershberger
    [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates,
    drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM]
    Signed-off-by: Tom Rini

    Joe Hershberger
     

01 Jun, 2015

1 commit

13 May, 2015

1 commit

  • bd328eb38   Clean all defconfigs with savedefconfig ... Browse Code »

    In order to reduce merge conflicts and to maintain the simplest possible
    defconfig files, we should be using the savedefconfig feature of Kconfig
    every time a new feature is added. This keeps the defconfig settings to
    a minimum (only those things not default) and keeps them in the same
    order as the Kconfig options.

    Signed-off-by: Joe Hershberger
    Cc: Masahiro Yamada
    Acked-by: Stephen Warren
    Cc: Tom Rini

    Joe Hershberger
     

21 Feb, 2015

1 commit

  • 4614b8913   ARM: at91: move board select menu and common settings ... Browse Code »

    The board select menu in arch/arm/Kconfig is still big.
    To slim down it, this commit moves AT91 boards to
    arch/arm/mach-at91/Kconfig.
    Also, consolidate "config SYS_SOC" in each board Kconfig.

    The Kconfig files under board/ directory were modified with the
    following command:

    find board -name Kconfig | xargs sed -i -e '
    /config SYS_SOC/ {
    N
    /default "at91"/ {
    N
    d
    }
    }
    '

    Signed-off-by: Masahiro Yamada
    Acked-by: Andreas Bießmann

    Masahiro Yamada
     

30 Jul, 2014

1 commit

  • dd84058d2   kconfig: add board Kconfig and defconfig files ... Browse Code »

    This commit adds:
    - arch/${ARCH}/Kconfig
    provide a menu to select target boards
    - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
    - configs/${TARGET_BOARD}_defconfig
    default setting of each board

    (This commit was automatically generated by a conversion script
    based on boards.cfg)

    In Linux Kernel, defconfig files are located under
    arch/${ARCH}/configs/ directory.
    It works in Linux Kernel since ARCH is always given from the
    command line for cross compile.

    But in U-Boot, ARCH is not given from the command line.
    Which means we cannot know ARCH until the board configuration is done.
    That is why all the "*_defconfig" files should be gathered into a
    single directory ./configs/.

    Signed-off-by: Masahiro Yamada
    Acked-by: Simon Glass

    Masahiro Yamada