Eric Lee / smarc-uboot

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

02 Sep, 2017

1 commit

  • ecad7051b   configs: Migrate all of the existing USB symbols, except fastboot ... Browse Code »
    20

    This syncs all of the currently Kconfig'd symbols out of the headers and
    into the defconfig files. This has two exceptions, first am335x_evm
    needs to be converted to DM in SPL and then it can stop undef'ing
    CONFIG_DM_USB. Leaving this as-is results in a build failure, and
    without work, run time failure. The other case is am43xx_evm.h and in
    turn am43xx_evm_usbhost_boot. The problem here is that we need DWC3 USB
    host mode in SPL, but still desire to have gadget mode in U-Boot proper.

    Signed-off-by: Tom Rini

    Tom Rini
     

20 Apr, 2017

1 commit

  • 7095f8641   sunxi: Convert CONS_INDEX to Kconfig ... Browse Code »
    40

    Convert the CONS_INDEX configuration to Kconfig.
    Update sunxi's defconfigs to remove SYS_EXTRA_OPTIONS variable not
    needed anymore.
    Default value is 1 except for sun5i (equals 2) and sun8i (equals 5).

    Signed-off-by: Mylène Josserand
    [Maxime: Added a depends on ARCH_SUNXI to avoid build breakages]
    Signed-off-by: Maxime Ripard

    Mylène Josserand
     

14 Mar, 2017

1 commit

28 Jan, 2017

3 commits

17 Sep, 2016

2 commits

25 May, 2016

1 commit

  • 0878a8a7d   sunxi: Enable a bunch of commands by default on sunxi ... Browse Code »

    Recently a set of CONFIG_CMD_FOO defines was moved from being defined
    in config_distro_defaults to Kconfig, and added to all sunxi defconfigs
    to compensate.

    Instead of explictly selecting these in all sunxi defconfigs,
    simply always select these for sunxi boards. This makes the defconfigs
    simpler and ensures a consistent set of available commands across all
    sunxi boards.

    Signed-off-by: Hans de Goede

    Hans de Goede
     

26 Apr, 2016

3 commits

12 Apr, 2016

1 commit

  • 88bb800dd   sunxi: Enable CMD_GPIO on all sunxi boards ... Browse Code »

    We have CONFIG_CMD_GPIO=y in almost all sunxi boards, but after
    its Kconfig conversion it has ended up missing on some recently
    added boards.

    Simply select it for ARCH_SUNXI, so that we get it on all
    sunxi boards for both a consistent user experience and simpler
    defconfig files.

    Signed-off-by: Hans de Goede
    Acked-by: Ian Campbell

    Hans de Goede
     

24 Mar, 2016

1 commit

  • d75111a79   sunxi: Select CONFIG_OF_BOARD_SETUP from arch/arm/Kconfig ... Browse Code »

    Always select OF_BOARD_SETUP on sunxi, rather then having it in almost
    all our defconfigs. This also fixes it missing from some recently
    added defconfigs.

    This commit also modifies our ft_board_setup() to not cause warnings
    when CONFIG_VIDEO_DT_SIMPLEFB is not set, since we will now always
    build it.

    Signed-off-by: Hans de Goede
    Acked-by: Ian Campbell

    Hans de Goede
     

15 Mar, 2016

1 commit

  • 73223f0e1   Kconfig: Move CONFIG_FIT and related options to Kconfig ... Browse Code »

    There are already two FIT options in Kconfig but the CONFIG options are
    still in the header files. We need to do a proper move to fix this.

    Move these options to Kconfig and tidy up board configuration:

    CONFIG_FIT
    CONFIG_OF_BOARD_SETUP
    CONFIG_OF_SYSTEM_SETUP
    CONFIG_FIT_SIGNATURE
    CONFIG_FIT_BEST_MATCH
    CONFIG_FIT_VERBOSE
    CONFIG_OF_STDOUT_VIA_ALIAS
    CONFIG_RSA

    Unfortunately the first one is a little complicated. We need to make sure
    this option is not enabled in SPL by this change. Also this option is
    enabled automatically in the host builds by defining CONFIG_FIT in the
    image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
    be used in files that are built on the host but must also build for U-Boot
    and SPL.

    Note: Masahiro's moveconfig.py script is amazing.

    Signed-off-by: Simon Glass
    [trini: Add microblaze change, various configs/ re-applies]
    Signed-off-by: Tom Rini

    Simon Glass
     

10 Dec, 2015

1 commit

22 Nov, 2015

1 commit

19 Nov, 2015

1 commit

21 Oct, 2015

1 commit

  • 1df44814f   sunxi: Kconfig-ify CONFIG_AXP152_POWER and _AXP209_POWER ... Browse Code »

    Kconfig-ify CONFIG_AXP152_POWER and _AXP209_POWER settings, removing
    them from CONFIG_SYS_EXTRA_OPTIONS.

    Note that sun5i boards can have either an AXP209 or an AXP152 pmic, the
    Kconfig default is AXP209, boards with an AXP152 must explicitly select
    this. Likewise boards without a pmic must explicitly select SUNXI_NO_PMIC
    in their defconfig.

    Signed-off-by: Hans de Goede
    Acked-by: Ian Campbell

    Hans de Goede
     

28 Sep, 2015

1 commit

31 Aug, 2015

1 commit

  • 4ddcf1df1   sunxi: Add inet98v_rev2 defconfig and dts file ... Browse Code »

    The inet98v_rev2 is a pcb used in generic A13 based tablets. It features
    volume buttons, a power barrel, micro-usb otg, headphone connector and
    a power button.

    The dts file is identical to the one submitted to the upstream kernel.

    Signed-off-by: Hans de Goede
    Acked-by: Ian Campbell

    Hans de Goede