28 Feb, 2018
1 commit
-
The u-boot-elf.srec is needed for the minimon update on Gen3 SoCs,
conveniently generate this file.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
24 Feb, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_BOOTP_BOOTPATH
CONFIG_BOOTP_DNS
CONFIG_BOOTP_GATEWAY
CONFIG_BOOTP_HOSTNAME
CONFIG_BOOTP_PXE
CONFIG_BOOTP_SUBNETMASK
CONFIG_CMDLINE_EDITING
CONFIG_AUTO_COMPLETE
CONFIG_SYS_LONGHELP
CONFIG_SUPPORT_RAW_INITRD
CONFIG_ENV_VARS_UBOOT_CONFIGSigned-off-by: Adam Ford
[trini: Re-run the migration]
Signed-off-by: Tom Rini
16 Feb, 2018
1 commit
-
This makes the shell so much more pleasant to use, so enable it.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
11 Feb, 2018
1 commit
-
On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
values into the defconfig and removing them from the headers.I did not attempt to add more default values in and for now will leave
that to maintainers.Signed-off-by: Tom Rini
23 Jan, 2018
2 commits
-
fat.h unconditionally defines CONFIG_SUPPORT_VFAT (and has done since
2003), so as a result VFAT support is always enabled regardless of
whether a board config defines it or not. Drop this unnecessary option.Signed-off-by: Tuomas Tynkkynen
-
Migrate the following symbols to Kconfig:
CONFIG_FS_EXT4
CONFIG_EXT4_WRITEThe definitions in config_fallbacks.h can now be expressed in Kconfig.
Signed-off-by: Tuomas Tynkkynen
09 Dec, 2017
1 commit
-
Add bits to support yet another SoC, the R8A77970 V3M .
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
30 Nov, 2017
2 commits
-
These macros are no longer needed since the DRAM configuration is parsed
from the DT. Drop them all.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu -
Pull out the GIC macros from the board configuration files
into the common Gen3 configuration file since these macros
are the same for all Gen3 systems.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
28 Sep, 2017
1 commit
-
Enable the PFC pinmux and GPIO drivers and disable the SH GPIO combo
driver. This allows the drivers to obtain pinmux and GPIO configuration
from DT rather than hard-coding it in board files.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu
24 Sep, 2017
2 commits
-
Place the stack right below U-Boot so it's not in the way in case
U-Boot grows too much.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu -
Just move those config options from macros to configs.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu
04 Sep, 2017
1 commit
-
Now that the fallback value of CONFIG_SYS_PBSIZE in
include/config_fallbacks.h has been adjusted, remove its definition
from a large number of board configuration files.Signed-off-by: Thomas Petazzoni
Reviewed-by: Tom Rini
15 Aug, 2017
1 commit
-
Also introduce CONFIG_USE_BOOTARGS option so we can control if
CONFIG_BOOTARGS defined at all.Signed-off-by: Sam Protsenko
[trini: Resync r8a779[56]_ulcb, various ls10xx targets]
Signed-off-by: Tom Rini
12 Aug, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_SDRAMSigned-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich
03 Aug, 2017
1 commit
-
Allow pasting extra long lines into the U-Boot console on RCar Gen3.
This is OK since we have plenty of resources and it's convenient.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu
04 Jun, 2017
1 commit
-
Now that these symbols are in Kconfig, migrate all users. Use imply on
a number of platforms that default to having this enabled. As part of
this we must migrate some straglers for CMD_FAT and DOS_PARTITION.Signed-off-by: Tom Rini
22 May, 2017
4 commits
-
Set default device tree file in the salvator-x_defconfig
and use it in the environment.Signed-off-by: Marek Vasut
Cc: Hiroyuki Yokoyama
Cc: Nobuhiro Iwamatsu -
Move these two Kconfig symbols to the salvator-x_defconfig.
Signed-off-by: Marek Vasut
Cc: Hiroyuki Yokoyama
Cc: Nobuhiro Iwamatsu -
Add Kconfig entry for the R8A7796 RCar M3 SoC.
Signed-off-by: Marek Vasut
Cc: Hiroyuki Yokoyama
Cc: Nobuhiro Iwamatsu -
Update the CONFIG_SYS_TEXT_BASE to match BL2 Rev.1.0.9 and newer,
which loads the U-Boot to 0x50000000 .Signed-off-by: Marek Vasut
Cc: Hiroyuki Yokoyama
Cc: Nobuhiro Iwamatsu
01 May, 2017
1 commit
-
This option is not used in U-Boot. Drop it.
Signed-off-by: Simon Glass
20 Mar, 2017
1 commit
-
Move this in to Kconfig with a default of 115200.
Signed-off-by: Philipp Tomsich
[trini: Run moveconfig.py, reword commit slightly]
Signed-off-by: Tom Rini
28 Jan, 2017
1 commit
-
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay
26 Jan, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_BOARD_EARLY_INIT_FSigned-off-by: Simon Glass
24 Oct, 2016
3 commits
-
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_INFO_QUIETSigned-off-by: Simon Glass
[trini: Make this default n, re-run the migration]
Signed-off-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINESigned-off-by: Simon Glass
Reviewed-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_ENV_OVERWRITESigned-off-by: Simon Glass
Reviewed-by: Tom Rini
12 Oct, 2016
2 commits
-
Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default
in certain architectures. Migrate all config files.Signed-off-by: Lokesh Vutla
Signed-off-by: Tom Rini -
Create a Kconfig entry for DISPLAY_CPUINFO and make it be the default
in certain architectures. Migrate all config files.Signed-off-by: Lokesh Vutla
Signed-off-by: Tom Rini
10 Sep, 2016
1 commit
-
move VERSION_VARIABLE from board config file into a
Kconfig option.Signed-off-by: Heiko Schocher
21 Aug, 2016
1 commit
-
[trini: Drop CMD_BOOTI as it's now on by default on ARM64]
Signed-off-by: Tom Rini
17 Aug, 2016
2 commits
-
This commit remove dupilicate following configs from rcar-gen3-common.h.
- CONFIG_CMD_BOOTZ
- CONFIG_BOOTDELAY
- CONFIG_CMD_EDITENV
- CONFIG_CMD_SAVEENV
- CONFIG_CMD_MEMORY
- CONFIG_CMD_RUN
- CONFIG_CMD_LOADSSigned-off-by: Nobuhiro Iwamatsu
-
Salvator-x is an entry level development board based on
R-Car H3 SoC (R8A7795). This commit supports SCIF only.Signed-off-by: Hiroyuki Yokoyama
Signed-off-by: Nobuhiro Iwamatsu