06 Oct, 2017
1 commit
-
Signed-off-by: Jean-Jacques Hiblot
Reviewed-by: Tom Rini
Reviewed-by: Simon Glass
07 Oct, 2016
1 commit
-
When using gzwrite to eMMC on an i.MX6Q board, the following warning
occurs repeatedly:
CACHE: Misaligned operation at range [4fd63318, 4fe63318]This patch cache-aligns the memory allocation for the gzwrite writebuf,
therefore avoiding the misaligned dcache flush and the warning from
check_cache_range.Signed-off-by: Clemens Gruber
Reviewed-by: Eric Nelson
Reviewed-by: Stefan Agner
19 Apr, 2016
1 commit
-
Call blk_dwrite to ensure that the block cache is notified
if enabled and remove build breakage when CONFIG_BLK is enabled.Signed-off-by: Eric Nelson
Reviewed-by: Stephen Warren
15 Mar, 2016
1 commit
-
Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long
and causes 80-column violations, rename it to struct blk_desc.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
Tested-by: Stephen Warren
10 Feb, 2016
1 commit
-
Current, the following passes:
./u-boot -d arch/sandbox/dts/test.dtb -c 'ut_image_decomp'
but the following fails:
./u-boot -d arch/sandbox/dts/test.dtb -c 'ut dm; ut_image_decomp'This is because the gunzip code reads input data beyond the end of its
input buffer. In the first case above, this data just happens to be 0,
which just happens to trigger gzip to signal the error the decompression
unit test expects. In the second case above, the "ut dm" test has written
data to the accidentally-read memory, which causes the gzip code to take a
different path and so return a different value, which triggers the test
failure.The cause of gunzip reading past its input buffer is the re-calculation of
s.avail_in in zunzip(), since it can underflow. Not only is the formula
non-sensical (it uses the delta between two output buffer pointers to
calculate available input buffer size), it also appears to be unnecessary,
since the gunzip code already maintains this value itself. This patch
removes this re-calculation to avoid the underflow and redundant work.The loop exit condition is also adjusted so that if inflate() has consumed
the entire input buffer, without indicating returning Z_STREAM_END (i.e.
decompression complete without error), an error is raised. There is still
opportunity to simplify the code here by splitting up the loop exit
condition into separate tests. However, this patch makes the minimum
modifications required to solve the problem at hand, in order to keep the
Acked-by: Kees Cookdiff simple.
I am not entirely convinced that the loop in zunzip() is necessary at all.
It could only be useful if inflate() can return Z_BUF_ERROR (which
typically means that it needs more data in the input buffer, or more space
in the output buffer), even though Z_FINISH is set /and/ the full input is
available in the input buffer /and/ there is enough space to store the
decompressed output in the output buffer. The comment in zlib.h after the
prototype of inflate() implies this is never the case. However, I assume
there must have been some reason for introducing this loop in the first
place, as part of commit "Fix gunzip to work for any gziped uImage size".This patch is similar to the earlier b75650d84d4b "gzip: correctly
bounds-check output buffer", which corrected a similar issue for
s.avail_out.Cc: Catalin Radu
Cc: Kees Cook
Fixes: f039ada5c109 ("Fix gunzip to work for any gziped uImage size")
Signed-off-by: Stephen Warren
19 Jan, 2016
1 commit
-
Only when we have CONFIG_CMD_UNZIP enabled do we have the 'gzwrite'
command. While this command should be separated from CONFIG_CMD_UNZIP
we should also only include the write portion of the gz code in that
case as well.Signed-off-by: Tom Rini
14 Jan, 2016
1 commit
-
This will allow the implementation to make use of data in the block_dev
structure beyond the base device number. This will be useful so that eMMC
block devices can encompass the HW partition ID rather than treating this
out-of-band. Equally, the existence of the priv field is crying out for
this patch to exist.Signed-off-by: Stephen Warren
Reviewed-by: Tom Rini
20 Nov, 2015
1 commit
-
The console includes a global variable and several functions that are only
used by a small subset of U-Boot files. Before adding more functions, move
the definitions into their own header file.Signed-off-by: Simon Glass
23 Apr, 2015
1 commit
-
Initial filesystem images are generally highly compressible.
Add a routine gzwrite that allows gzip-compressed images to be
written to block devices.Signed-off-by: Eric Nelson
Reviewed-by: Tom Rini
15 Jan, 2015
1 commit
-
This allows the caller to easily detect how much of the destination buffer
has been used.Signed-off-by: Simon Glass
04 Sep, 2013
1 commit
-
The output buffer size must not be reset by the gzip decoder or there
is a risk of overflowing memory during decompression.Signed-off-by: Kees Cook
Acked-by: Simon Glass
24 Jul, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
30 Apr, 2012
1 commit
-
This allows us to add a proper zalloc() func (one that does a zeroing
alloc), and removes duplicate prototypes.Signed-off-by: Mike Frysinger
13 Apr, 2011
1 commit
-
Signed-off-by: Catalin Radu
13 Oct, 2010
1 commit
-
As usually done in U-Boot, the watchdog_reset code is called via a
macro (WATCHDOG_RESET). In zlib.c this was done differently, by using
a function pointer which is initialized with WATCHDOG_RESET upon watchdog
usage or with NULL otherwise. This patch now uses the plain
WATCHDOG_RESET macros to call the function resulting in slightly smaller
U-Boot images and simpler code.U-Boot code size reduction:
PowerPC board with watchdog support (lwmon5):
-> 80 bytes smaller image sizePowerPC board without watchdog support (sequoia):
-> 112 bytes smaller image sizeSigned-off-by: Stefan Roese
Cc: Detlev Zundel
Cc: Wolfgang Denk
Acked-by: Detlev Zundel
13 Apr, 2010
1 commit
-
Now that the other architecture-specific lib directories have been
moved out of the top-level directory there's not much reason to have the
'_generic' suffix on the common lib directory.Signed-off-by: Peter Tyser
