30 Jan, 2018
1 commit
-
zc770-xm011 is also added and supported. Reflect this in README.
Signed-off-by: Michal Simek
24 Jan, 2018
2 commits
-
NAND and QSPI devices are now supported, so mark
them as such.Cc: Michal Simek
Signed-off-by: Ezequiel Garcia
Signed-off-by: Michal Simek -
Setup proper dependency in Kconfig for SPL_CLK.
If SPL is not enabled, SPL_CLK shouldn't be selected.Cc: Michal Simek
Signed-off-by: Ezequiel Garcia
Signed-off-by: Michal Simek
17 Jan, 2018
1 commit
-
In some cases when "more" is told to page a given file it will prepend
the output with:
::::::::::::::
/PATH/TO/THE/FILE
::::::::::::::And when this happens the output will not match the expected length.
Further, if we use a different pager we will instead fail the coverage
tests as we will not have 100% coverage. Update the help test to remove
the string in question.Reviewed-by: Simon Glass
Signed-off-by: Tom Rini
16 Jan, 2018
36 commits
-
The operation should be OR, not BIT OR.
Signed-off-by: Peng Fan
Cc: Heiko Schocher
Cc: Stefano Babic -
Modify the lpi2c alias seq number to align with device.
Then no need to add 4 to get the device index.Signed-off-by: Peng Fan
-
The number 4 is dedicated on i.MX7ULP, but lpi2c will be reused on i.MX8,
4 is not valid. The seq number could be configured by alias node.The following patch will use i2c4 as the begin for i.MX7ULP.
Signed-off-by: Peng Fan
-
Set this to our own device-tree compiler since we know it is new enough to
run the tests.Signed-off-by: Simon Glass
-
The system device-tree compiler may not be new enough to run the tests we
use in U-Boot (e.g. with binman). Allow use of a DTC environment variable
to point to the correct dtc. If not defined, the dtc on the default PATH
is used.Signed-off-by: Simon Glass
-
The DT spec demands a unit-address in a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Remove the unit address from the config node name when U-Boot deals with
secure firmware FIT images.Signed-off-by: Andre Przywara
-
The DT spec demands a unit-address in a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Correct the generated unit names when U-Boot's mkimage creates a FIT
image.Signed-off-by: Andre Przywara
-
The DT spec demands a unit-address in a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Adjust the FIT build script for 64-bit Allwinner boards to remove the
bogus addresses from the node names and avoid the warnings.
This avoids a warning with recent versions of the dtc tool.Signed-off-by: Andre Przywara
-
The DT spec demands a unit-address in a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Fix all occurences in the tree where node names were mentioned in
comments, to not give bad examples to the reader.Signed-off-by: Andre Przywara
-
The DT spec demands a unit-address in a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Fix all occurences in various documentation files where this was not
observed, to not give bad examples to the reader.Signed-off-by: Andre Przywara
-
The DT spec demands a unit-address of a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Fix all occurences in the FIT image example files where this was not
observed, to not give bad examples to the reader.Signed-off-by: Andre Przywara
-
The DT spec demands a unit-address in a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Fix all occurences in the FIT image documentation files where this was not
observed, to not give bad examples to the reader.Signed-off-by: Andre Przywara
-
Binman has 100% test coverage for the code as it is at present. To
encourage it to stay that way, run the code-coverage test as part of the
normal U-Boot tests.This is RFC because it requires the Python code coverage tools to be
available.Signed-off-by: Simon Glass
-
Run tests for the Python tools used by U-Boot.
Signed-off-by: Simon Glass
-
Update the test script to run the dtoc tests also.
Signed-off-by: Simon Glass
-
Update the test script to run the buildman tests also.
Signed-off-by: Simon Glass
-
Update the test script to run the patman tests also.
Signed-off-by: Simon Glass
-
Update the test script to run the binman tests also.
Signed-off-by: Simon Glass
-
Signed-off-by: Rob Clark
-
If lk lights up display and populates simple-framebuffer node, it will
also setup a reserved-memory node (needed by simplefb on linux). But
it isn't clever enough to cope when the reserved-memory node is not
present.Signed-off-by: Rob Clark
-
We dont need to keep copies of the properties that we are going to
fixup since we will be using the dtb provided by the firmware.Signed-off-by: Jorge Ramirez-Ortiz
-
Similar to CONFIG_OF_BOARD, but in this case the fdt is still built by
u-boot build. This allows the board to patch the fdt, etc.In the specific case of dragonboard 410c, we pass the u-boot generated
fdt to the previous stage of bootloader (by embedding it in the
u-boot.img that is loaded by lk/aboot), which patches the fdt and passes
it back to u-boot.Signed-off-by: Rob Clark
[trini: Update board_fdt_blob_setup #if check]
Signed-off-by: Tom Rini -
this should be the norm for armv8 platforms.
Signed-off-by: Jorge Ramirez-Ortiz
-
The firmware that runs before u-boot modifies u-boot's device tree
adding the local-mac-address and local-bd-address properties for the
compatibles "qcom,wcnss-bt" and "qcom,wcnss-wlan".This commit reads that firmware, retrieves the properties and fixups
the device tree that is passed to the kernel before booting.Signed-off-by: Jorge Ramirez-Ortiz
-
the kernel fails to boot when it goes over the limit.
Signed-off-by: Jorge Ramirez-Ortiz
-
Signed-off-by: Jorge Ramirez-Ortiz
-
Signed-off-by: Jorge Ramirez-Ortiz
-
This commit adds support for 96Boards Dragonboard820C.
The board is based on APQ8086 Qualcomm Soc, complying with the
96Boards specification.Features
- 4x Kyro CPU (64 bit) up to 2.15GHz
- USB2.0
- USB3.0
- ISP
- Qualcomm Hexagon DSP
- SD 3.0 (UHS-I)
- UFS 2.0
- Qualcomm Adreno 530 GPU
- GPS
- BT 4.2
- Wi-Fi 2.4GHz, 5GHz (802.11ac)
- PCIe 2.0
- MIPI-CSI, MIPI-DSI
- I2SU-Boot boots chained from LK (LK implements the fastboot protocol) in
64-bit mode.For detailed build instructions see readme.txt in the board directory.
Signed-off-by: Jorge Ramirez-Ortiz
-
In preparation to add support for the Dragonboard820c (APQ8096),
refactor the current Snapdragon clock driver.No new functionality has been added.
Signed-off-by: Jorge Ramirez-Ortiz
-
For example to store the environment in a file named "/uboot.env" in MMC
"0", where partition "1" contains the EXT4 filesystem, the following
configs should be added to the board's default config:CONFIG_ENV_IS_IN_EXT4=y
CONFIG_ENV_EXT4_DEVICE_AND_PART="0:1"
CONFIG_ENV_EXT4_FILE="/uboot.env"
CONFIG_ENV_EXT4_INTERFACE="mmc"Signed-off-by: Jorge Ramirez-Ortiz
[trini: Fix some line over 80 chars issues]
Signed-off-by: Tom Rini -
Signed-off-by: Zhao Qiang
Acked-by: Joe Hershberger -
This adds SH_ETHER to drivers/net/Kconfig and convert to Kconfig.
Signed-off-by: Nobuhiro Iwamatsu
Acked-by: Joe Hershberger
