15 May, 2015
2 commits
-
This commit cleanups the PMIC framework documentation.
Signed-off-by: Przemyslaw Marczak
Acked-by: Simon Glass
Tested on sandbox:
Tested-by: Simon Glass -
Since this framework is still under the construction, the main
documentation is kept in the header files.Signed-off-by: Przemyslaw Marczak
Acked-by: Simon Glass
23 Apr, 2015
1 commit
-
There are a lot more tests now. To avoid confusion add the updated test
output to the driver model README.Signed-off-by: Simon Glass
Reviewed-by: Joe Hershberger
19 Apr, 2015
1 commit
-
Add some documentation describing how USB is implemented with USB. This
might make things easier for people to understand.Signed-off-by: Simon Glass
17 Apr, 2015
1 commit
-
Add a uclass for PCI controllers and a generic one for PCI devices. Adjust
the 'pci' command and the existing PCI support to work with this new uclass.
Keep most of the compatibility code in a separate file so that it can be
removed one day.TODO: Add more header file comments to the new parts of pci.h
Signed-off-by: Simon Glass
13 Feb, 2015
1 commit
-
Expand the help messages for each driver. Add missing Kconfig for I2C,
SPI flash and thermal.Signed-off-by: Simon Glass
Reviewed-by: Masahiro Yamada
30 Jan, 2015
3 commits
-
Now that we have new bus features, update README.txt and the SPI docs to
explain these.
Signed-off-by: Simon Glass -
At present we try to use the 'reg' property and device tree aliases to give
devices a sequence number. The 'reg' property is often actually a memory
address, so the sequence numbers thus-obtained are not useful. It would be
better if the devices were just sequentially numbered in that case. In fact
neither I2C nor SPI use this feature, so drop it.Some devices need us to look up an alias to number them within the uclass.
Add a flag to control this, so it is not done unless it is needed.Adjust the tests to test this new behaviour.
Signed-off-by: Simon Glass
Reviewed-by: Masahiro Yamada -
The root device corresponds to the root device tree node, so set this up.
Also add a few notes to the documentation.Signed-off-by: Simon Glass
06 Jan, 2015
1 commit
-
To enjoy driver-model on sandbox, using device tree is recommended.
While we are here, change sandbox_config to sandbox_defconfig too.Signed-off-by: Masahiro Yamada
Acked-by: Simon Glass
Acked-by: Jagannadha Sutradharudu Teki
21 Nov, 2014
1 commit
-
Add documentation for the various driver model options that are now
available.Signed-off-by: Simon Glass
24 Oct, 2014
3 commits
-
Add tests for gpio_requestf() and for memory leaks.
Signed-off-by: Simon Glass
-
Add a helper which permits a printf()-style format string for the requester
string.Signed-off-by: Simon Glass
-
Now that gpio_request() is handled by the uclass, updates the tests
accordingly.Signed-off-by: Simon Glass
23 Oct, 2014
3 commits
-
This README is intended to help maintainers move their SPI drivers over to
driver model. It works through the required steps with an example.Signed-off-by: Simon Glass
Reviewed-by: Jagannadha Sutradharudu Teki -
The sequence number is unique within the uclass, so state this clearly.
Signed-off-by: Simon Glass
Acked-by: Jagannadha Sutradharudu Teki -
Buses need to iterate through their children in some situations. Add a few
functions to make this easy.Signed-off-by: Simon Glass
Acked-by: Jagannadha Sutradharudu Teki
23 Jul, 2014
8 commits
-
Some devices (particularly bus devices) must track their children, knowing
when a new child is added so that it can be set up for communication on the
bus.Add a child_pre_probe() method to provide this feature, and a corresponding
child_post_remove() method.Signed-off-by: Simon Glass
-
Some device types can have child devices and want to store information
about them. For example a USB flash stick attached to a USB host
controller would likely use this space. The controller can hold
information about the USB state of each of its children.The data is stored attached to the child device in the 'parent_priv'
member. It can be auto-allocated by dm when the child is probed. To
do this, add a per_child_auto_alloc_size value to the parent driver.Signed-off-by: Simon Glass
-
Devices can have childen that can be addressed by a simple index, the
sequence number or a device tree offset. Add functions to access a child
in each of these ways.The index is typically used as a fallback when the sequence number is not
available. For example we may use a serial UART with sequence number 0 as
the console, but if no UART has sequence number 0, then we can fall back
to just using the first UART (index 0).The device tree offset function is useful for buses, where they want to
locate one of their children. The device tree can be scanned to find the
offset of each child, and that offset can then find the device.Signed-off-by: Simon Glass
-
At present only root nodes in the device tree are scanned for devices.
But some devices can have children. For example a SPI bus may have
several children for each of its chip selects.Add a function which scans subnodes and binds devices for each one. This
can be used for the root node scan also, so change it.A device can call this function in its bind() or probe() methods to bind
its children.Signed-off-by: Simon Glass
-
Don't allow access to uclasses before they have been initialised.
Signed-off-by: Simon Glass
-
Each device that was bound from a device tree has an node that caused it to
be bound. Add functions that find and return a device based on a device tree
offset.Signed-off-by: Simon Glass
-
In U-Boot it is pretty common to number devices from 0 and access them
on the command line using this numbering. While it may come to pass that
we will move away from this numbering, the possibility seems remote at
present.Given that devices within a uclass will have an implied numbering, it
makes sense to build this into driver model as a core feature. The cost
is fairly small in terms of code and data space.With each uclass having numbered devices we can ask for SPI port 0 or
serial port 1 and receive a single device.Devices typically request a sequence number using aliases in the device
tree. These are resolved when the device is probed, to deal with conflicts.
Sequence numbers need not be sequential and holes are permitted.At present there is no support for sequence numbers using static platform
data. It could easily be added to 'struct driver_info' if needed, but it
seems better to add features as we find a use for them, and the use of -1
to mean 'no sequence' makes the default value somewhat painful.Signed-off-by: Simon Glass
-
Driver model currently only operates after relocation is complete. In this
state U-Boot typically has a small amount of memory available. In adding
support for driver model prior to relocation we must try to use as little
memory as possible.In addition, on some machines the memory has not be inited and/or the CPU
is not running at full speed or the data cache is off. These can reduce
execution performance, so the less initialisation that is done before
relocation the better.An immediately-obvious improvement is to only initialise drivers which are
actually going to be used before relocation. On many boards the only such
driver is a serial UART, so this provides a very large potential benefit.Allow drivers to mark themselves as 'pre-reloc' which means that they will
be initialised prior to relocation. This can be done either with a driver
flag or with a 'dm,pre-reloc' device tree property.To support this, the various dm scanning function now take a 'pre_reloc_only'
parameter which indicates that only drivers marked pre-reloc should be
bound.Signed-off-by: Simon Glass
21 Jun, 2014
2 commits
-
The lifecycle of a device is an important part of driver model. Add to the
existing documentation and clarify it.Reported-by: Jon Loeliger
Signed-off-by: Simon Glass
-
It is best to avoid having any occurence of 'struct device' in driver
model, so rename to achieve this.Signed-off-by: Simon Glass
12 Jun, 2014
1 commit
-
Signed-off-by: Chris Packham
27 May, 2014
1 commit
-
using UBI and DM together leads in compiler error, as
both define a "struct device", so rename "struct device"
in include/dm/device.h to "struct udevice", as we use
linux code (MTD/UBI/UBIFS some USB code,...) and cannot
change the linux "struct device"Signed-off-by: Heiko Schocher
Cc: Simon Glass
Cc: Marek Vasut
05 Mar, 2014
2 commits
-
This documentation pertains to the planned implementation of driver model
in U-Boot for each subsystem, but it has not been superseded. It is
probably better to have this documentation in the source code for each
subsystem where possible, so that docbook will pick it up. Where this does
not make sense, new documentation can be placed in some suitable file in
doc/driver-model.Signed-off-by: Simon Glass
-
This adds a README to help with understanding of this series.
Signed-off-by: Simon Glass
06 Feb, 2014
2 commits
-
This driver is no longer used, remove it.
Signed-off-by: Marek Vasut
Cc: Albert Aribaud
Cc: Michael Schwingen
Cc: Tom Rini -
The driver is no longer used, remove it.
Signed-off-by: Marek Vasut
Cc: Albert Aribaud
Cc: Michael Schwingen
Cc: Tom Rini
09 Nov, 2013
3 commits
-
This commit omits non-existing drivers/net/netarm_eth.c from the list.
This driver is deleted by commit b411eb30f.Signed-off-by: Masahiro Yamada
-
The following serial drivers do not exist any more.
- ns9750_serial.c: deleted by commit 4cfc611b4
- s3c4510b_uart.c: deleted by commit afad40299
- serial_clps7111.c: deleted by commit f2e080156
- serial_netarm.c: deleted by commit b411eb30fThis commit cleans up UDM-serial.txt.
Signed-off-by: Masahiro Yamada
-
Everytime a dead driver is removed from the list,
we must re-number. This is a painful task.Try
git show e53232250 -- doc/driver-model/UDM-serial.txt
git show 6f62f4207 -- doc/driver-model/UDM-serial.txt
git show b9f4bc34a -- doc/driver-model/UDM-serial.txt
to see what I mean.Signed-off-by: Masahiro Yamada
15 Oct, 2013
2 commits
-
Signed-off-by: Wolfgang Denk
-
Signed-off-by: Wolfgang Denk
[trini: Drop changes for PEP 4 following python tools]
Signed-off-by: Tom Rini
19 Sep, 2013
2 commits
-
Since commit 5dc5f36 removed B2 board support,
there are no boards enabling s3c44b0_rtc.Signed-off-by: Masahiro Yamada
Cc: Wolfgang Denk
Cc: Andrea Scian -
Since commit 5dc5f36 removed B2 board support,
there are no boards enabling serial_s3c44b0.Signed-off-by: Masahiro Yamada
Cc: Wolfgang Denk
Cc: Andrea Scian