20 Nov, 2012
6 commits
-
Enable USB keyboard for seaboard and ventana
Signed-off-by: Allen Martin
Acked-by: Stephen Warren
Tested-by: Stephen Warren -
Move environment settings for stdin/stdout/stderr to
tegra-common-post.h and generate them automaticaly based on input
device selection.Signed-off-by: Allen Martin
Acked-by: Stephen Warren
Tested-by: Stephen Warren -
Change usb_kbd driver to obey alignment requirements for USB DMA on
the buffer used for data transfer. This is necessary for
architectures that enable dcache and enable USB DMA.Signed-off-by: Allen Martin
Tested-by: Stephen Warren
Reviewed-by: Stephen Warren -
CONFIG_EHCI_DCACHE was removed by commit b8adb12
"USB: Drop cache flush bloat in EHCI-HCD". Remove the defines from
the boards configs as well.Signed-off-by: Jeroen Hofstee
cc: Marek Vasut
cc: Stefan Roese
cc: Tom Rini
cc: Wolfgang Denk
cc: Thierry Reding
cc: Tom Warren
cc: Stephen Warren
cc: Stefano Babic
14 Nov, 2012
34 commits
-
Signed-off-by: Robert P. J. Day
-
The inclusion of LCD patch into mx53loco breaks the build when
CONFIG_VIDEO is disabled. Fix this by splitting the video
related stuff to a new file.Also rename the function lcd_iomux to setup_iomux_lcd to make the
namings aligned with the other iomux functions.Signed-off-by: Vikram Narayanan
Signed-off-by: Anatolij Gustschin
Cc: Fabio Estevam
Cc: Stefano Babic -
The inclusion of LCD patch into mx51evk breaks the build when
CONFIG_VIDEO is disabled. Fix this by splitting the video related
stuff to a new file.Also rename the function lcd_iomux to setup_iomux_lcd to make the
namings aligned with the other iomux functions.Signed-off-by: Vikram Narayanan
Signed-off-by: Anatolij Gustschin
Cc: Fabio Estevam
Cc: Stefano Babic -
This patch adds time measurement and throughput calculation for
all supported load commands.The output of ext2load changes from
---88---
to
---88---
Signed-off-by: Andreas Bießmann
[agust: rebased and revised commit log]
Signed-off-by: Anatolij Gustschin -
the upcoming sunxi (allwinner a10/a13) platform enables zfs
by default, and using linaro's hf -msoft-float makes the build
fail because this u64 division.Signed-off-by: Alejandro Mery
Acked-by: Stefan Roese -
if a board uses the vcxk driver option CONFIG_SYS_VCXK_DOUBLEBUFFERD,
compilier shows warnings. This patch will fix it.Signed-off-by: Jens Scharsig (BuS Elektronik)
-
- update clock settings for higher perfomance
- change standard baud rate to 115200
- fix flash base address
- remove unused defines
- add I2C support
- switch form board dependent flash to cfi
- remove board dependent flash code
- use sdram bank 0 instead of bank 1 on boot
- enable on board frame buffer instead external
- remove fake mac address form config
- add watchdog support
- add status led supportSigned-off-by: Jens Scharsig (BuS Elektronik)
[agust: fixed small style issues and build warning]
Signed-off-by: Anatolij Gustschin -
Move pmic_init() function call from board_init() to power_init_board()
to work with new PMIC/POWER framework.Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Minkyu Kang -
Move pmic_init() function call from board_init() to power_init_board()
to work with new PMIC/POWER framework.Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Minkyu Kang -
Rename CONFIG_DIALOG_PMIC to CONFIG_DIALOG_POWER
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Stefano Babic -
Rename all CONFIG_PMIC* defines to CONFIG_POWER*
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Stefano Babic -
Rename pmic/power related files at ./drivers/power directory
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Stefano Babic -
Two extra commands:
"pmic name bat state" and "pmic name bat charge" has been added to
pmic framework. Those provides state display and charge capabilities
to named batteries.The pmic_core.c file has been refactored to more consistent name scheme.
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Stefano Babic -
The battery connected to Samsung's Trats development board is now
charged when voltage drops below threshold.Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Minkyu Kang -
When charging battery is necessary, the development board needs to
be turned into low power mode for better efficiency.Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Minkyu Kang -
Support for MAX8997 built-in charger.
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Stefano Babic -
Support for TRATS battery has been added. It is treated as a "normal"
power related device and thereof controlled by pmic/power subsystem.Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Minkyu Kang -
FG IC built into the MAX8997 device (compliant to MAX17042) is enabled
at TRATS.Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Minkyu Kang -
MUIC IC built into the MAX8997 device is enabled at TRATS.
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Minkyu Kang -
Default PMIC (MAX8997) initialization for Samsung's TRATS development board.
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Minkyu Kang -
Function for calculating LDO internal register value from passed micro
Volt.Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Stefano Babic -
Support for MAX17042 fuel-gauge (FG), which is built into the MAX8997
power management device.
Special file - fg_battery_cell_params.h with cells characteristics
added.The FG device will work with redesigned PMIC framework.
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Stefano Babic -
Support for MUIC (Micro USB Integrated Circuit) built into the MAX8997
power management device.The MUIC device will work with redesigned PMIC framework.
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Stefano Babic -
Trats battery is now treated in the same way as other power related
devices. This approach allows for more unified handling of all devices
responsible for power management.Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Stefano Babic -
Now it is possible to provide specific function per PMIC/power
device instance.Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park -
The PMIC framework has been moved to its more natural place
./drivers/power from ./drivers/misc directory.Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park -
New power_chrg.h file has been added to "bind" together common
information about charging battery available in the system.Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Stefano Babic -
Enable support for power_board_init() method at TRATS board.
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Minkyu Kang -
It is necessary to introduce a new system wide function- power_init_board()
It turns out, that power initialization must be done as early as possible.
In the case of PMIC framework redesign, which aims to support multiple
instances of PMIC devices the initialization shall be performed just
after malloc configuration.The power_init_board function is a weak function with default implementation.
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park -
The PMIC framework has been extended to support multiple instances of
the variety of devices responsible for power management.
This change allows supporting of e.g. fuel gauge, charger, MUIC (Micro USB
Interface Circuit).
Power related includes have been moved to ./include/power directory.
This is a first of a series of patches - in the future "pmic" will be
replaced with "power".Two important issues:
1. The PMIC needs to be initialized just after malloc is configured
2. It uses list to hold information about available PMIC devicesSigned-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Stefano Babic -
PMIC MAX8997 is now ready to work with single and multibus soft I2C
implementation.Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park -
Since the pmic_reg_read is the u32 value, the order in which bytes
are placed to form u32 value is important.Support for big and little sensor endianess is added.
Moreover calls to [leXX|beXX]_to_cpu have been added to support
little and big endian SoCs.Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park -
This patch adds support for proper handling of a PMIC I2C transmission
comprising of two bytes.Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Stefano Babic -
Commit 97b24d3d51a92cb8c0c1e1a74abf22fe1a1807a3 "common: Add symbol
handling for generic lists into Makefile" introduced build errors in many
nand_spl targets, complaining of a missing u-boot.lst. When not doing an
out-of-tree build, $(obj) expands to nothing, so GCC ended up being given
-I with no argument (or rather, -ansi was the argument). The failure
didn't show up during a -j1 build because it was picking up the non-SPL
version of u-boot.lst.Signed-off-by: Scott Wood
