20 Feb, 2019
34 commits
-
Add sound support for link, using the HDA codec implementation.
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
When testing the sound system we don't need the hear the beeps. The
testing works by checking the data that would be emitted. Add a
device-tree property to silence the sound, and enable it for testing.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
The Intel High-definition Audio is a newer-generation audio system which
provides for transfer of a large number of audio stream, each containing
up to 16 channels.Add support for HDA as a library which can be used by other drivers.
U-Boot currently uses only two channels (stereo).Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
Some audio codecs such as Intel HDA do not need to use digital data to
play sounds, but instead have a way to emit beeps. Add this interface as
an option. If the beep interface is not supported, then the sound uclass
falls back to the I2S interface.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
This method in the sound API is optional since some drivers can do this
when probing or as part of SoC init. Mark it as such.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
Add a way check to whether HD audio is enabled. Use ioctl() to avoid
adding too many unusual operations to PCH.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
At present the PCH has 4 operations and these are reasonably widely used
in the drivers. But sometimes we want to add rarely used operations, and
each of these currently adds to the size of the PCH operations table.Add an ioctl() method which can be easily expanded without any more impact
on the operations table.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
This uclass currently has no tests. Add a sandbox driver and some simple
tests to provide basic coverage.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
[bmeng: Use "sandbox,pch" for the compatible string, for consistency]
Signed-off-by: Bin Meng -
At present this uclass is selected only on x86. In order to add a test for
it, it must also support sandbox. Create a new CONFIG_PCH option and
enable it on x86 and sandbox.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
At present link does not boot since it has outgrown its pre-relocation
malloc() size and its assigned code area. Increase the former and drop
EFI loader support, which adds about 45KB!Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
This is too small now, likely due to the pre_reloc_only fixes. Increase
it.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
At present these macros give warnings on 64-bit machines and do not
correctly do 32-bit accesses. Update them to use linux types.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
This struct is getting larger and in some cases is being used for things
which would be better put into a driver. For example hwspinlock is not
used outside of sandbox_hwspinlock.c.Add a note to encourage people to put things elsewhere.
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
Add a few IDs for common HDA blocks and the ADSP used on samus.
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
Allow the 'gpio' command to match GPIO bank names regardless of the case
of each. While these are generally in upper case, it is useful to be able
to provide lower case with the command.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
At present the gpio command only shows GPIOs which are marked as in use.
This makes sense with 'gpio status' since we already have the '-a' flag
to indicate that all GPIOs should be shown. But when a particular GPIO is
requested, it seems better to always display it. At present the request is
simply ignored.For example if GPIO a10 is not in use, then:
> gpio status a10
shows nothing, not even the function being used for that GPIO. With this
change, it shows the pin status:> gpio status a10
a10: input: 0 [ ]Add an extra parameter for this to avoid changing the existing flag
parameter.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
Tested-by: Bin Meng
[bmeng: correct the 'gpio' command in the commit message]
Signed-off-by: Bin Meng -
This is platdata, not private data, so the comment is currently incorrect.
Fix it to avoid confusion.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
This function is not used outside this file so make it static.
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
At present this driver does not check whether it is able to actually
communicate with the I2C controller. It prints a timeout message but still
considers the probe to be successful.To fix this, add some checking that the init succeeds.
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Heiko Schocher -
At present it is not possible to use the syscon devices for PCI devices
since a regmap is required. Since PCI uses a 3-cell address the conversion
of the 'reg' property to an address always fails. In any case, the regmap
is not useful with PCI since devices are accessed through the PCI bus
which regmap does not support.Add a special case for PCI syscon devices, so that they don't set up a
regmap.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
At present it is possible to '#define DEBUG' at the top of a file which
causes all debug() statements in that file to become active. There is
currently no equivalent with logging, but this is a useful function.Add a LOG_DEBUG define along with documentation.
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
The log_debug(), etc. function are documented only in the header file at
present. Add a section to README.log also.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
At present the default log level is set to LOGL_INFO on start-up. Allow
this to be controlled from Kconfig.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
The log level numbers in the Kconfig are not actually correct. Fix them
and also add a missing space in the header-file comment.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng -
- Convert some OMAP3 platforms to DM+SPL
- Various minor fixes
- Updates for hikey, DaVinci, am57xx platforms,
- Make FAT use less memory -
We build the platform here that matches with "omap" in its own job,
don't need to have it here as well.Signed-off-by: Tom Rini
-
Signed-off-by: Ismael Luceno
-
Signed-off-by: Chris Packham
-
- Switch to using the omap3-u-boot.dtsi file for needed properties
- Enable SPL_OF_CONTROLThis commit is based on the following series:
https://patchwork.ozlabs.org/project/uboot/list/?series=92472
https://patchwork.ozlabs.org/project/uboot/list/?series=92462Signed-off-by: Derald D. Woods
Reviewed-by: Tom Rini -
Switch to DM_SPI support now.
Signed-off-by: Tom Rini
-
- Switch to using the omap3-u-boot.dtsi file for needed properties.
- Remove a few SPL features to free up more SRAM space.
- Switch CONFIG_SYS_TEXT_BASE to the normal default, we don't need to
worry about X-Loader at this point anymore.
- A few related updates to SPL options as part of switching to DM SPL.Signed-off-by: Tom Rini
Tested-by: Derald D. Woods -
Fixes:
cmd/fs.c:29: undefined reference to `efi_set_bootdev'Signed-off-by: Francois Gervais
-
With the generic omap3-u-boot.dtsi file available, this patch
increased the memory of the various incarnations of the omap3_logic
board, and points their respective u-boot.dtsi files to the newly
created generic one, and removes the PLATDATA from the board file.These are all done at once because the're all utilizing the same
omap3logic.c board file.Signed-off-by: Adam Ford
-
Create generic omap3-u-boot.dtsi file that omap3 based boards
can include to generate device tree in SPL for booting MLO.Credit should go to Tom Rini.
Signed-off-by: Adam Ford
Signed-off-by: Tom Rini
Tested-by: Derald D. Woods
19 Feb, 2019
6 commits
-
The README.da850 file continues information on how to burn NAND
for the LCDK, but not the DA850-EVM. This patch adds both the
commands and dip switch instructions for burning and booting
NAND.Signed-off-by: Adam Ford
-
The other OMAP3 based Logic PD boards have Falcon Mode enabled,
so this patch makes it possible on the AM3517-evm as well.Signed-off-by: Adam Ford
-
The SPI NOR frameware was recently updated, but they require a little
more memory that we had previosly allocated, so it stopped booting.
This patch doubles the size of CONFIG_SPL_SYS_MALLOC_F_LEN to 0x800.Fixes: c4e8862308d4 ("mtd: spi: Switch to new SPI NOR framework")
Signed-off-by: Adam Ford
-
Current Hikey configuration allows us to store u-boot environment on uSD
card. But this will be useless if uSD card is not inserted, hence use
the onboard eMMC memory for storing environment at Boot1 partition.
While we are at it, let's increase the boot delay to 10s also.Signed-off-by: Manivannan Sadhasivam
-
Enable usage of gdbserver for all sandbox targets (sandbox,
sandbox_flattree etc.).Signed-off-by: Igor Opaniuk
Reviewed-by: Tom Rini
Reviewed-by: Simon Glass -
We use TARGET_BCM63158 in the Kconfig instead of ARCH_BCM63158,
so we could add other board that use a bcm63158.Signed-off-by: Philippe Reynes
