11 Sep, 2018
1 commit
-
This patch enables DM_SERIAL for the pandora board. Verified that
the default kernel can still be booted with this.Signed-off-by: Grazvydas Ignotas
07 May, 2018
1 commit
-
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.Signed-off-by: Tom Rini
15 May, 2017
1 commit
-
Now CONFIG_GENERIC_MMC and CONFIG_MMC match for all defconfig.
We do not need two options for the same feature. Deprecate the
former.This commit was generated with the sed script 's/GENERIC_MMC/MMC/'
and manual fixup of drivers/mmc/Kconfig.Signed-off-by: Masahiro Yamada
23 Oct, 2015
1 commit
-
This introduces omap_die_id_display to display the full die id.
There is no need to store it in an environment variable, that no boot script
is using anyway.Signed-off-by: Paul Kocialkowski
Reviewed-by: Tom Rini
05 Dec, 2014
1 commit
-
Boards using the TWL4030 regulator may not all use the LDOs the same way
(e.g. MMC2 power can be controlled by another LDO than VMMC2).
This delegates TWL4030 MMC power initializations to board-specific functions,
that may still call twl4030_power_mmc_init for the default behavior.Signed-off-by: Paul Kocialkowski
Reviewed-by: Tom Rini
[trini: Fix omap3_evm warning, add twl4030.h]
Signed-off-by: Tom Rini
23 Oct, 2014
1 commit
-
Fix the following checkpatch issues:
CHECK: No space is necessary after a cast
\#39: FILE: arch/arm/include/asm/arch-am33xx/mux.h:39:
+#define PAD_CTRL_BASE 0x800
+#define OFFSET(x) (unsigned int) (&((struct pad_signals *) \CHECK: Avoid CamelCase:
\#284: FILE: arch/arm/include/asm/arch-omap3/mux.h:284:
+#define CONTROL_PADCONF_JTAG_nTRST 0x0A1CERROR: space required after that ',' (ctx:VxV)
\#446: FILE: arch/arm/include/asm/arch-omap3/mux.h:446:
+#define MUX_VAL(OFFSET,VALUE)\
^
Cc: Raphael Assenat
Cc: Ilya Yanok
Cc: Vaibhav Hiremath
Cc: Peter Barada
Cc: Grazvydas Ignotas
Cc: Stefan Roese
Cc: Stefano Babic
Cc: Nagendra T S
Cc: Nishanth Menon
Cc: Tom Rini
Signed-off-by: Igor Grinberg
Acked-by: Stefan Roese
14 Sep, 2014
1 commit
-
Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}
are specified in arch/Kconfig.We can delete the ones in arch and board Kconfig files.
This commit can be easily reproduced by the following command:
find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '
/config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ {
N
s/\n[[:space:]]*string//
}
'Signed-off-by: Masahiro Yamada
31 Aug, 2014
1 commit
-
Becuase the board select menu in arch/arm/Kconfig is too big,
move the OMAP3 board select menu to omap3/Kconfig.Move also common settings (CONFIG_SYS_CPU="armv7" and
CONFIG_SYS_SOC="omap3Signed-off-by: Masahiro Yamada
Reviewed-by: Tom Rini
30 Jul, 2014
2 commits
-
We have switched to Kconfig and the boards.cfg file is going to
be removed. We have to retrieve the board status and maintainers
information from it.The MAINTAINERS format as in Linux Kernel would be nice
because we can crib the scripts/get_maintainer.pl script.After some discussion, we chose to put a MAINTAINERS file under each
board directory, not the top-level one because we want to collect
relevant information for a board into a single place.TODO:
Modify get_maintainer.pl to scan multiple MAINTAINERS files.Signed-off-by: Masahiro Yamada
Suggested-by: Tom Rini
Acked-by: Simon Glass -
This commit adds:
- arch/${ARCH}/Kconfig
provide a menu to select target boards
- board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
set CONFIG macros to the appropriate values for each board
- configs/${TARGET_BOARD}_defconfig
default setting of each board(This commit was automatically generated by a conversion script
based on boards.cfg)In Linux Kernel, defconfig files are located under
arch/${ARCH}/configs/ directory.
It works in Linux Kernel since ARCH is always given from the
command line for cross compile.But in U-Boot, ARCH is not given from the command line.
Which means we cannot know ARCH until the board configuration is done.
That is why all the "*_defconfig" files should be gathered into a
single directory ./configs/.Signed-off-by: Masahiro Yamada
Acked-by: Simon Glass
01 Nov, 2013
1 commit
-
Signed-off-by: Masahiro Yamada
Cc: Albert ARIBAUD
Cc: Andreas Bießmann
Cc: Stefano Babic
Cc: Prafulla Wadaskar
Cc: Minkyu Kang
Cc: Vipin Kumar
Cc: Tom Warren
Cc: Tom Rini
24 Jul, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
10 May, 2013
1 commit
-
u-boot standard i2c register write prototype is
i2c_reg_write(u8 addr, u8 reg, u8 val)twl4030_i2c_write_u8(u8 addr, u8 val, u8 reg)
does not provide consistency, so switch the prototype to be
consistent with rest of u-boot i2c operations:
twl4030_i2c_write_u8(u8 addr, u8 reg, u8 val)Signed-off-by: Nishanth Menon
09 Mar, 2013
2 commits
-
Add check for write protection in omap mmc driver.
Signed-off-by: Nikita Kiryanov
Signed-off-by: Igor Grinberg
Reviewed-by: Tom Rini -
Implement driver check for card detection.
Signed-off-by: Nikita Kiryanov
Signed-off-by: Igor Grinberg
15 May, 2012
3 commits
-
Update pandora's GPIO setup code with these changes:
- convert to gpiolib
- set up dual voltage GPIOs to match supply of 1.8V by clearing VMODE1
- add GPIO_IO_PWRDNZ configuration for DM3730 variation of pandora
(required to enable GPIO 126, 127, and 129 I/O cells in DM3730)
- add wifi reset pulse as recommended by wifi chip's manufacturer
- drop configuration of GPIOs that u-boot doesn't needSigned-off-by: Grazvydas Ignotas
-
DM3730 needs some additional pin mux configuration for GPIOs
126-129 to work, add it.Signed-off-by: Grazvydas Ignotas
-
Add parameters to the OMAP MMC initialization function so the board can
mask host capabilities and set the maximum clock frequency. While the
OMAP supports a certain set of MMC host capabilities, individual boards
may be more restricted and the OMAP may need to be configured to match
the board. The PRG_SDMMC1_SPEEDCTRL bit in the OMAP3 is an example.Signed-off-by: Jonathan Solnit
16 Oct, 2011
1 commit
-
The top level Makefile does not do any recursion into subdirs when
cleaning, so these clean/distclean targets in random arch/board dirs
never get used. Punt them all.MAKEALL didn't report any errors related to this that I could see.
Signed-off-by: Mike Frysinger
04 Sep, 2011
2 commits
-
Switch from the legacy omap3 mmc driver to the new generic omap hsmmc
driver. This patch is based on the work done for Beagle, etc.Signed-off-by: Tom Rini
Signed-off-by: Sandeep Paulraj -
Signed-off-by: Aneesh V
Acked-by: Dirk Behme
21 Dec, 2010
1 commit
-
It can be optimised out by the compiler otherwise resulting
in obscure errors like a board not booting.This has been documented in README since 2006 when these were
first fixed up for GCC 4.x.Signed-off-by: John Rigby
Fix some additional places.
Signed-off-by: Wolfgang Denk
Acked-By: Albert ARIBAUD
20 Nov, 2010
1 commit
-
map
Fix the build breakage introduced by the recent relocation
and memory layout changes for ARM.Signed-off-by: Grazvydas Ignotas
Signed-off-by: Sandeep Paulraj
18 Nov, 2010
1 commit
-
Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils. As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.The name of each former library archive is preserved except for
extensions which change from ".a" to ".o". This commit updates
references accordingly where needed, in particular in some linker
scripts.This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols. Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.Signed-off-by: Sebastien Carlier
19 Oct, 2010
1 commit
-
The change is currently needed to be able to remove the board
configuration scripting from the top level Makefile and replace it by
a simple, table driven script.Moving this configuration setting into the "CONFIG_*" name space is
also desirable because it is needed if we ever should move forward to
a Kconfig driven configuration system.Signed-off-by: Wolfgang Denk
09 Jun, 2010
1 commit
-
Pandora has a capacitor connected as backup battery, which allows
retaining RTC for some time while main battery is removed. Enable backup
battery charge function to charge that capacitor.Signed-off-by: Grazvydas Ignotas
Signed-off-by: Sandeep Paulraj
04 Jan, 2010
2 commits
-
These regulators are not needed to start the kernel and only
cause "incomplete constraints" warnings from kernel, so don't
turn them on to save power.Signed-off-by: Grazvydas Ignotas
-
Not all boards have both LEDs hooked, so enabling both on
boards with single LED will just waste power. Make it
possible to choose LEDs by adding argument to
twl4030_led_init().Using this turn on only LEDB for pandora, leave both LEDs
on for all other boards, as it was before this patch.Signed-off-by: Grazvydas Ignotas
24 Nov, 2009
1 commit
-
When the board is booted without serial cable attached (which
is how most of them will be used) UART RX is left floating and
sometimes picks noise, which interrupts countdown and enters
U-Boot prompt instead of booting the kernel.Fix this by setting up internal pullup on UART RX pin. This
does not prevent serial from working as the internal pullup
is weak.Signed-off-by: Grazvydas Ignotas
13 Oct, 2009
1 commit
-
Switch from space-based indentation to tab-based in mux configs, as pointed
out by WD at:http://lists.denx.de/pipermail/u-boot/2009-September/061241.html
Nothing but whitespace changes in this patch (diff -w gives no output).
Signed-off-by: Olof Johansson
05 Sep, 2009
1 commit
-
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
