Eric Lee / smarc-uboot

29 Feb, 2020

1 commit

23 Jan, 2020

1 commit

05 Dec, 2019

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

13 Nov, 2019

1 commit

08 Nov, 2019

1 commit

31 Aug, 2019

1 commit

  • 40a13173b   arm: omap2: am43xx: Enable CONFIG_DM_USB ... Browse Code »

    Enable CONFIG_DM_USB to remove compile warning for
    am43xx based targets:

    ===================== WARNING ======================
    This board does not use CONFIG_DM_USB. Please update
    the board to use CONFIG_DM_USB before the v2019.07 release.
    Failure to update by the deadline may result in board removal.
    See doc/driver-model/MIGRATION.txt for more info.
    ====================================================

    Signed-off-by: Suniel Mahesh

    Suniel Mahesh
     

26 Aug, 2019

2 commits

20 Aug, 2019

1 commit

  • e171dc292   arm: omap2: am43xx: Enable CONFIG_BLK ... Browse Code »

    With DM_MMC enabled, enable CONFIG_BLK to remove this
    compile warning for am43xx based targets:

    ===================== WARNING ======================
    This board does not use CONFIG_DM_MMC. Please update
    the board to use CONFIG_DM_MMC before the v2019.04 release.
    Failure to update by the deadline may result in board removal.
    See doc/driver-model/MIGRATION.txt for more info.
    ====================================================

    Targets were compile tested, build was clean.

    Signed-off-by: Suniel Mahesh

    Suniel Mahesh
     

14 Aug, 2019

1 commit

09 Jul, 2019

1 commit

  • a9221f3eb   at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs ... Browse Code »
    12

    Enable the extended ENV options for AT91 and OMAP2PLUS in order to be
    able to use CONFIG_ENV_UBI_* on these architectures.

    As this change also makes the configs ENV_SIZE, ENV_SECT_SIZE,
    ENV_OFFSET visible to AT91 and OMAP2PLUS, migrate users of these to
    KConfig.

    This migration was run using an extended moveconfig.py which evaluates
    expressions such as "(512 << 10)". See patch ("moveconfig: expand
    simple expressions").

    All modified boards were built with SOURCE_DATE_EPOCH=0 before and
    after the change and successfully confirmed that the identical binary
    is generated (the only exception was igep00x0, which does not define
    CONFIG_ENV_IS_IN_UBI in the original board header. Once that is
    defined, the test passes too).

    hs: rebased patch to:
    68b90e57bc: "configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT"

    Signed-off-by: Markus Klotzbuecher
    Cc: Heiko Schocher
    Cc: Eugen Hristev
    Cc: Tom Rini

    Markus Klotzbuecher
     

26 Mar, 2019

1 commit

  • 14453fbfa   Convert CONFIG_SF_DEFAULT_* to Kconfig ... Browse Code »
    36

    This converts the following to Kconfig:
    CONFIG_SF_DEFAULT_BUS
    CONFIG_SF_DEFAULT_CS
    CONFIG_SF_DEFAULT_MODE
    CONFIG_SF_DEFAULT_SPEED

    I use moveconfig script and then manual check on generated u-boot.cfg
    to solve the remaining issue.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     

08 Jan, 2019

1 commit

04 Sep, 2018

1 commit

18 Aug, 2018

3 commits

28 Apr, 2018

1 commit

  • f1b1f7706   Convert CONFIG_SPI to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SPI

    This partly involves updating code that assumes that CONFIG_SPI implies
    things that are specific to the MPC8xx SPI driver. For now, just update
    the CONFIG tests. This also involves reworking the default for
    CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
    reasonable default, as it does not cause any compile failures.

    Signed-off-by: Adam Ford
    Signed-off-by: Tom Rini

    Adam Ford
     

09 Apr, 2018

2 commits

07 Apr, 2018

1 commit

23 Feb, 2018

1 commit

11 Feb, 2018

1 commit

28 Jan, 2018

1 commit

23 Jan, 2018

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

04 Oct, 2017

1 commit

  • a95aee6af   usb: gadget: Make g_dnl USB settings common ... Browse Code »

    The g_dnl USB settings for the vendor ID, product ID and manufacturer are
    actually common settings that can and should be shared by all the gadgets.

    Make them common by renaming them, and convert all the users.

    Reviewed-by: Simon Glass
    Reviewed-by: Lukasz Majewski
    Signed-off-by: Maxime Ripard

    Maxime Ripard
     

28 Aug, 2017

1 commit

15 Aug, 2017

1 commit

08 Aug, 2017

1 commit

26 Jul, 2017

1 commit

19 Jun, 2017

1 commit

04 Jun, 2017

1 commit

  • 91d27a17c   Kconfig: Migrate FS_FAT / FAT_WRITE ... Browse Code »

    Now that these symbols are in Kconfig, migrate all users. Use imply on
    a number of platforms that default to having this enabled. As part of
    this we must migrate some straglers for CMD_FAT and DOS_PARTITION.

    Signed-off-by: Tom Rini

    Tom Rini
     

22 May, 2017

1 commit

  • a1dc980d8   Convert CONFIG_CMD_EEPROM et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_CMD_EEPROM
    CONFIG_CMD_EEPROM_LAYOUT
    CONFIG_EEPROM_LAYOUT_HELP_STRING

    Signed-off-by: Simon Glass
    Reviewed-by: Tom Rini
    [trini: Rework Kconfig logic slightly, define EEPROM location on TI eval
    platforms]
    Signed-off-by: Tom Rini

    Simon Glass
     

28 Apr, 2017

1 commit

19 Mar, 2017

1 commit

  • 3a649407a   arm: Migrate SYS_THUMB_BUILD to Kconfig, introduce SPL_SYS_THUMB_BUILD ... Browse Code »
    20

    Today, we have cases where we wish to build all of U-Boot in Thumb2 mode for
    various reasons. We also have cases where we only build SPL in Thumb2 mode due
    to size constraints and wish to build the rest of the system in ARM mode. So
    in this migration we introduce a new symbol as well, SPL_SYS_THUMB_BUILD to
    control if we build everything or just SPL (or in theory, just U-Boot) in
    Thumb2 mode.

    Signed-off-by: Tom Rini
    Acked-by: Siarhei Siamashka

    Tom Rini
     

28 Jan, 2017

2 commits