Eric Lee / smarc-uboot

29 Feb, 2020

1 commit

23 Jan, 2020

1 commit

07 Jan, 2020

3 commits

05 Dec, 2019

5 commits

04 Dec, 2019

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

13 Nov, 2019

1 commit

25 Oct, 2019

1 commit

  • 832ce2027   mtd: spi: Clean up usage of CONFIG_SPI_FLASH_MTD ... Browse Code »

    Most boards currently use SPI_FLASH_MTD only in U-Boot proper, not in
    SPL. They often rely on hacks in the board header files to include
    this option conditionally. To be able to fix this, we previously
    introduced a separate option SPL_SPI_FLASH_MTD.

    Therefore we can now adjust the Makefile and change the code in
    sf_probe.c and sf_internal.h to use CONFIG_IS_ENABLED(SPI_FLASH_MTD).

    We also need to move all occurences of CONFIG_SPI_FLASH_MTD from the
    header files to the according defconfigs. The affected boards are
    socfpga, aristainetos, cm_fx6, display5, ventana, rcar-gen2, dh_imx6
    and da850evm.

    We do this all in one patch to guarantee bisectibility.

    This change was tested with buildman to make sure it does not
    introduce any regressions by comparing the resulting binary sizes.

    Signed-off-by: Frieder Schrempf
    Reviewed-by: Stefan Roese
    Reviewed-by: Simon Goldschmidt
    Acked-by: Lukasz Majewski
    Reviewed-by: Heiko Schocher
    Reviewed-by: Jagan Teki

    Frieder Schrempf
     

24 Aug, 2019

1 commit

20 Jul, 2019

1 commit

23 Jun, 2019

1 commit

30 Apr, 2019

1 commit

14 Apr, 2019

1 commit

26 Mar, 2019

1 commit

  • 14453fbfa   Convert CONFIG_SF_DEFAULT_* to Kconfig ... Browse Code »
    36

    This converts the following to Kconfig:
    CONFIG_SF_DEFAULT_BUS
    CONFIG_SF_DEFAULT_CS
    CONFIG_SF_DEFAULT_MODE
    CONFIG_SF_DEFAULT_SPEED

    I use moveconfig script and then manual check on generated u-boot.cfg
    to solve the remaining issue.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     

19 Jan, 2019

1 commit

  • 2acc24fc2   Kconfig: Migrate BOUNCE_BUFFER ... Browse Code »

    The bounce buffer is used by a few drivers (most of the MMC drivers)
    to overcome limitations in their respective DMA implementation.

    This moves the configuration to Kconfig and makes it user-selectable
    (even though it will be a required feature to make those drivers
    work): the expected usage is for drivers depending on this to 'select'
    it unconditionally from their respective Kconfig (see follow-up
    patches).

    This commit includes a full migration using moveconfig.py to ensure
    that each commit compiles. To ensure bisectability we update
    dependencies of various drivers to now select BOUNCE_BUFFER when needed.

    [trini: Squash all patches to ensure bisectability]
    Signed-off-by: Tom Rini
    Signed-off-by: Philipp Tomsich
    Reviewed-by: Otavio Salvador [dw_mmc portion]
    Reviewed-by: Fabio Estevam [mxsmmc portion]
    Reviewed-by: Simon Glass [tegra portion]

    Philipp Tomsich
     

14 Nov, 2018

1 commit

  • cbabe7f87   configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS ... Browse Code »

    Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms
    that had been enabling it turn it on by hand. This exposed that we had
    not yet migrated CMD_MTDPARTS fully, so do so now.

    Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()")
    Signed-off-by: Tom Rini

    Tom Rini
     

22 Oct, 2018

1 commit

18 Aug, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

28 Apr, 2018

1 commit

  • f1b1f7706   Convert CONFIG_SPI to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SPI

    This partly involves updating code that assumes that CONFIG_SPI implies
    things that are specific to the MPC8xx SPI driver. For now, just update
    the CONFIG tests. This also involves reworking the default for
    CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
    reasonable default, as it does not cause any compile failures.

    Signed-off-by: Adam Ford
    Signed-off-by: Tom Rini

    Adam Ford
     

09 Apr, 2018

1 commit

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

14 Feb, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

08 Feb, 2018

1 commit

31 Oct, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

28 Aug, 2017

1 commit

15 Aug, 2017

1 commit

09 Aug, 2017

1 commit

08 Aug, 2017

2 commits

01 Aug, 2017

1 commit

  • 8f1a80e99   configs: Migrate CMD_NAND* ... Browse Code »

    Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS
    CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the
    defconfig files.

    Tested-by: Adam Ford
    Signed-off-by: Tom Rini
    Reviewed-by: Bin Meng

    Tom Rini