Eric Lee / smarc-uboot

23 Jan, 2020

1 commit

05 Dec, 2019

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

02 Aug, 2019

1 commit

21 Jun, 2019

1 commit

30 Apr, 2019

1 commit

11 Mar, 2019

1 commit

04 Sep, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

28 Apr, 2018

1 commit

  • f1b1f7706   Convert CONFIG_SPI to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SPI

    This partly involves updating code that assumes that CONFIG_SPI implies
    things that are specific to the MPC8xx SPI driver. For now, just update
    the CONFIG tests. This also involves reworking the default for
    CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
    reasonable default, as it does not cause any compile failures.

    Signed-off-by: Adam Ford
    Signed-off-by: Tom Rini

    Adam Ford
     

17 Apr, 2018

1 commit

09 Apr, 2018

2 commits

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

24 Aug, 2017

1 commit

15 Aug, 2017

2 commits

12 Aug, 2017

1 commit

01 Aug, 2017

8 commits

  • 1df7f0b6a   x86: kconfig: Let board select SPI flash ... Browse Code »

    Only a specific type of SPI flash exists on a board, having board
    Kconfig to select the SPI flash seems to make more sense. Other
    flash types are not necessary except coreboot, which implies all
    available flash drivers there.

    Signed-off-by: Bin Meng
    Reviewed-by: Simon Glass

    Bin Meng
     
  • a65ae2861   x86: queensbay: kconfig: Imply platform specific drivers ... Browse Code »

    Imply drivers that work with Intel Queensbay platform.

    Signed-off-by: Bin Meng
    Reviewed-by: Simon Glass

    Bin Meng
     
  • 4f0faacb4   x86: kconfig: Imply DM uclass drivers ... Browse Code »

    Now that all x86 boards have been converted to use DM, we can imply
    these uclass drivers (DM_ETH, DM_RTC, DM_USB, DM_VIDEO) from the
    top level.

    Previously DM_GPIO, DM_KEYBOARD, DM_SERIAL, DM_SPI, DM_SPI_FLASH
    are selected. Change to use 'imply' to allow them to be removed.

    Note with this change, chromebook_link64 build fails:

    common/built-in.o:(.data.env_htab+0xc): undefined reference to 'env_flags_validate'
    lib/built-in.o: In function `hsearch_r':
    lib/hashtable.c:380: undefined reference to 'env_callback_init'
    lib/hashtable.c:382: undefined reference to 'env_flags_init'
    make[1]: *** [spl/u-boot-spl] Error 1

    CONFIG_SPL_ENV_SUPPORT is required for chromebook_link64 to build
    again. This is just a workaround as it is not needed at all. See
    commit bda40d5 "x86: qemu: Add a config for 64-bit U-Boot" for
    the same issue seen on QEMU 64-bit target.

    Signed-off-by: Bin Meng
    Reviewed-by: Andy Shevchenko
    Reviewed-by: Simon Glass

    Bin Meng
     
  • 263252c76   x86: kconfig: Select OF_CONTROL ... Browse Code »

    This is a must have for all x86 boards.

    Signed-off-by: Bin Meng
    Reviewed-by: Andy Shevchenko
    Reviewed-by: Simon Glass

    Bin Meng
     
  • 6bf89de7e   x86: kconfig: Select PCI and DM_PCI ... Browse Code »

    PCI is the de facto interconnect bus in an x86 system.

    Signed-off-by: Bin Meng
    Reviewed-by: Andy Shevchenko
    Reviewed-by: Simon Glass

    Bin Meng
     
  • e28497bf4   x86: kconfig: Select USE_PRIVATE_LIBGCC ... Browse Code »

    x86 is using the built-in libgcc implementation and this cannot be
    turned off.

    Signed-off-by: Bin Meng
    Reviewed-by: Andy Shevchenko
    Reviewed-by: Simon Glass

    Bin Meng
     
  • 0ce9c5762   x86: kconfig: Select TIMER and X86_TSC_TIMER ... Browse Code »

    Without a timer, U-Boot just doesn't boot. This is not something
    we can turn off.

    Signed-off-by: Bin Meng
    Reviewed-by: Andy Shevchenko
    Reviewed-by: Simon Glass

    Bin Meng
     
  • eddc7dabe   configs: Resync with savedefconfig ... Browse Code »

    Rsync all defconfig files using moveconfig.py

    Signed-off-by: Tom Rini

    Tom Rini
     

30 Jul, 2017

1 commit

  • 611dbb7f9   arch/x86: Select USB before selecting host driver ... Browse Code »

    Kbuild complains if USB is not selected before any of host driver.

    warning: (X86) selects USB_EHCI_HCD which has unmet direct dependencies (USB)
    warning: (X86) selects USB_EHCI_HCD which has unmet direct dependencies (USB)

    Select it for X86.

    Fixes: 64d6ac5bc4a9 ("Kconfig: USB: Migrate CONFIG_USB_EHCI_HCD users to Kconfig")
    Signed-off-by: Andy Shevchenko
    [bmeng: Update all x86 boards' defconfig files to remove CONFIG_USB]
    Signed-off-by: Bin Meng

    Andy Shevchenko
     

26 Jul, 2017

1 commit

12 Jul, 2017

1 commit

21 Mar, 2017

1 commit

  • b706b1c24   mmc: pci: Add CONFIG_MMC_PCI ... Browse Code »

    We don't want pci_mmc to compile every time x86 compiles, only when
    there's a platform that needs it. For that reason, we're adding a new
    CONFIG_MMC_PCI which platforms can choose to enable.

    Suggested-by: Jaehoon Chung
    Reviewed-by: Bin Meng
    Signed-off-by: Felipe Balbi
    Signed-off-by: Andy Shevchenko

    Felipe Balbi
     

28 Jan, 2017

4 commits

30 Dec, 2016

3 commits

  • 45a68fe26   mmc: move some SDHCI related options to Kconfig ... Browse Code »

    While I moved the options, I also renamed them so that they are all
    prefixed with MMC_SDHCI_.

    This commit was created in the following steps.

    [1] Rename with the following command
    find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
    -type f -print | xargs sed -i -e '
    s/CONFIG_MMC_SDMA/CONFIG_MMC_SDHCI_SDMA/g
    s/CONFIG_BCM2835_SDHCI/CONFIG_MMC_SDHCI_BCM2835/g
    s/CONFIG_KONA_SDHCI/CONFIG_MMC_SDHCI_KONA/g
    s/CONFIG_MV_SDHCI/CONFIG_MMC_SDHCI_MV/g
    s/CONFIG_S5P_SDHCI/CONFIG_MMC_SDHCI_S5P/g
    s/CONFIG_SPEAR_SDHCI/CONFIG_MMC_SDHCI_SPEAR/g
    '

    [2] create the Kconfig entries in drivers/mmc/Kconfig

    [3] Move the options by the following command
    tools/moveconfig.py -y MMC_SDHCI_SDMA MMC_SDHCI_BCM2835 \
    MMC_SDHCI_KONA MMC_SDHCI_MV MMC_SDHCI_S5P MMC_SDHCI_SPEAR

    [4] Sort drivers/mmc/Makefile for readability

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Tom Rini
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     
  • e1ce61fbb   mmc: move CONFIG_SDHCI to Kconfig, renaming to CONFIG_MMC_SDHCI ... Browse Code »

    Move CONFIG_SDHCI to Kconfig and rename it to CONFIG_MMC_SDHCI.
    My motivation for the rename is, ultimately, to make all the MMC
    options prefixed with MMC_ and SDHCI options with MMC_SDHCI_,
    like Linux.

    This commit was created as follows:

    [1] Rename the config option with the following command:
    find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
    -type f -print | xargs sed -i -e 's/CONFIG_SDHCI/CONFIG_MMC_SDHCI/g'

    [2] create the entry for MMC_SDHCI in drivers/mmc/Kconfig

    [3] run "tools/moveconfig.py -y MMC_SDHCI"

    [4] add "depends on MMC_SDHCI" to existing SDHCI driver entries

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Tom Rini
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     
  • c27269953   mmc: complete unfinished move of CONFIG_MMC ... Browse Code »
    26

    Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
    a Kconfig entry for this option without any actual moves, then
    commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved
    instances only for SUNXI.

    We generally do not like such partial moves. This kind of work
    is automated by tools/moveconfig.py, so it is pretty easy to
    complete this move.

    I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
    This shortens the configs and will ease new board porting.

    This commit was created as follows:

    [1] Edit Kconfig (remove the "depends on", add the "default",
    copy the prompt and help message from Linux)

    [2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada