Eric Lee / smarc-uboot

05 Nov, 2020

1 commit

  • ddd0d14bc   configs: ls1088ardb: enable PHYLIB and related through Kconfig ... Browse Code »

    Starting with commit 7d9701db4089 ("cmd: mdio/mii: add Kconfig help and
    allow break dependency"), CMD_MDIO depends on the PHYLIB Kconfig which
    should be enabled properly from the Kconfig and not through any define
    from a header file.

    Move all LS1088ARDB configs to enable PHYLIB and related through
    Kconfig options. Also, remove the defines from the header file so that
    we do not redefine the same symbol.

    Signed-off-by: Ioana Ciornei

    Ioana Ciornei
     

02 Sep, 2020

1 commit

23 Jan, 2020

1 commit

05 Dec, 2019

2 commits

21 Nov, 2019

1 commit

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     

08 Nov, 2019

1 commit

22 May, 2019

1 commit

30 Apr, 2019

1 commit

07 Dec, 2018

2 commits

14 Nov, 2018

1 commit

25 Oct, 2018

1 commit

27 Sep, 2018

1 commit

04 Sep, 2018

1 commit

18 Aug, 2018

2 commits

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

27 Jul, 2018

1 commit

11 Jul, 2018

1 commit

09 May, 2018

1 commit

28 Apr, 2018

1 commit

  • f1b1f7706   Convert CONFIG_SPI to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SPI

    This partly involves updating code that assumes that CONFIG_SPI implies
    things that are specific to the MPC8xx SPI driver. For now, just update
    the CONFIG tests. This also involves reworking the default for
    CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
    reasonable default, as it does not cause any compile failures.

    Signed-off-by: Adam Ford
    Signed-off-by: Tom Rini

    Adam Ford
     

09 Apr, 2018

3 commits

15 Feb, 2018

1 commit

13 Feb, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

10 Feb, 2018

1 commit

19 Dec, 2017

1 commit

13 Dec, 2017

1 commit

07 Dec, 2017

1 commit

16 Nov, 2017

1 commit

  • d9195c62f   armv8: ls1088ardb: Add distro boot support ... Browse Code »

    Distro boot support gives flexibility to run distro RFS like Ubuntu
    being deployed from SD card or SATA drive. If it fails to detect
    external storage, fall back to qspi/sd boot.

    Enable this by default in RDB's defconfig by selecting
    CONFIG_DISTRO_DEFAULTS

    Signed-off-by: Ashish Kumar
    Signed-off-by: Zhang Ying
    Reviewed-by: York Sun

    Ashish Kumar
     

15 Nov, 2017

1 commit

31 Oct, 2017

1 commit

27 Oct, 2017

2 commits

17 Oct, 2017

1 commit

11 Oct, 2017

2 commits

  • 45c9d96ae   configs: Re-sync CONFIG_CMD_IMLS with moveconfig ... Browse Code »

    The option is specified in Kconfig, but still a few config header files
    are overriding the choice by #undef'ing it. Re-sync the option with
    moveconfig to rid of the #undefs.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     
  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen