Eric Lee / smarc-uboot

02 Apr, 2020

1 commit

  • 9778edae5   rockchip: Enable HDMI output on rk3399 board w/ HDMI ... Browse Code »
    1

    Enable config options and console setting to respective
    rk3399 board for HDMI output.

    Boards supported and tested on this patch are:
    - NanoPc T4
    - NanoPi M4
    - NanoPi Neo4
    - ROC-RK3399-PC
    - Rock960

    Cc: Manivannan Sadhasivam
    Signed-off-by: Jagan Teki
    Tested-by: Peter Robinson
    Reviewed-by: Kever Yang

    Jagan Teki
     

30 Jan, 2020

1 commit

23 Jan, 2020

1 commit

05 Dec, 2019

1 commit

24 Nov, 2019

1 commit

23 Nov, 2019

1 commit

21 Nov, 2019

3 commits

  • 32a238df7   configs: Resync with savedefconfig ... Browse Code »

    Rsync all defconfig files using moveconfig.py

    Signed-off-by: Tom Rini

    Tom Rini
     
  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

17 Nov, 2019

1 commit

10 Nov, 2019

1 commit

  • 006ab58d4   rockchip: rk3399: update SPL_STACK_R_ADDR ... Browse Code »

    Use the same SPL_STACK_R_ADDR in Kconfig instead of each board config;
    default to 0x4000000(64MB) instead of 0x80000(512KB) for this address
    can support all the SoCs including those may have only 64MB memory, and
    also reserve enough space for atf, kernel(in falcon mode) loading.

    After the ATF entry move to 0x40000, the stack from 0x80000 may be override
    when loading ATF bl31.

    Signed-off-by: Kever Yang

    Kever Yang
     

23 Sep, 2019

1 commit

23 Aug, 2019

1 commit

14 Aug, 2019

1 commit

20 Jul, 2019

2 commits

19 Jul, 2019

5 commits

08 May, 2019

2 commits

  • 2666bd42c   arm: rockchip: rk3399: Move common configs in Kconfig ... Browse Code »

    Few SPL and U-Boot proper configs are common to all rk3399 target
    defconfigs, move them and select it from platform kconfig.

    Moved configs:
    - SPL_ATF
    - SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
    - SPL_LOAD_FIT
    - SPL_CLK if SPL
    - SPL_PINCTRL if SPL
    - SPL_RAM if SPL
    - SPL_REGMAP if SPL
    - SPL_SYSCON if SPL
    - CLK
    - FIT
    - PINCTRL
    - RAM
    - REGMAP
    - SYSCON
    - DM_PMIC
    - DM_REGULATOR_FIXED

    Signed-off-by: Jagan Teki
    Reviewed-by: Kever Yang

    Jagan Teki
     
  • 695dca9a4   Kconfig: Add default SPL_FIT_GENERATOR for rockchip ... Browse Code »

    Add default SPL_FIT_GENERATOR py script for rockchip platforms if
    specific target enabled SPL_LOAD_FIT.

    So, this would help get rid of explicitly mentioning the default
    SPL FIT generator in defconfigs. however some targets, like puma_rk3399
    still require their own FIT generator so in those cases the default will
    override with defconfig defined generator.

    Reviewed-by: Paul Kocialkowski
    Signed-off-by: Jagan Teki
    Reviewed-by: Kever Yang

    Jagan Teki
     

30 Apr, 2019

2 commits

26 Mar, 2019

1 commit

  • 14453fbfa   Convert CONFIG_SF_DEFAULT_* to Kconfig ... Browse Code »
    36

    This converts the following to Kconfig:
    CONFIG_SF_DEFAULT_BUS
    CONFIG_SF_DEFAULT_CS
    CONFIG_SF_DEFAULT_MODE
    CONFIG_SF_DEFAULT_SPEED

    I use moveconfig script and then manual check on generated u-boot.cfg
    to solve the remaining issue.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     

08 Feb, 2019

1 commit

08 Jan, 2019

1 commit

06 Dec, 2018

1 commit

  • 07f768786   rockchip: rk3399: Add Rock960 CE board support ... Browse Code »

    Add board support for Rock960 CE board from Vamrs. This board utilizes
    common Rock960 family support.

    Following peripherals are tested and known to work:
    * USB 2.0
    * MMC

    This commit also adds DDR configuration for LPDDR3-2GiB-1600MHz which
    is being used on the board.

    Signed-off-by: Manivannan Sadhasivam
    Reviewed-by: Simon Glass
    Tested-by: Peter Robinson
    Reviewed-by: Philipp Tomsich

    Manivannan Sadhasivam