Eric Lee / smarc-uboot

23 Jan, 2020

1 commit

04 Dec, 2019

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

08 Nov, 2019

1 commit

23 Sep, 2019

1 commit

26 Aug, 2019

1 commit

05 May, 2019

1 commit

  • 623de3f08   Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SUPPORT_EMMC_BOOT

    As requested by Michal Simek , these boards
    have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated:

    xilinx_zynqmp_zc1275_revB
    xilinx_zynqmp_zc1751_xm018_dc4
    xilinx_zynqmp_zc1751_xm019_dc5
    xilinx_zynqmp_zcu100_revC
    xilinx_zynqmp_zcu102_rev1_0
    xilinx_zynqmp_zcu102_revA
    xilinx_zynqmp_zcu102_revB
    xilinx_zynqmp_zcu104_revA
    xilinx_zynqmp_zcu104_revC
    xilinx_zynqmp_zcu106_revA
    xilinx_zynqmp_zcu111_revA

    Signed-off-by: Alex Kiernan
    Acked-by: Lukasz Majewski
    Acked-by: Patrick Delaunay
    Acked-by: Ramon Fried
    Reviewed-by: Andy Shevchenko
    Tested-by: Sébastien Szymanski

    Alex Kiernan
     

30 Apr, 2019

2 commits

26 Mar, 2019

2 commits

  • abe66b1b5   Convert CONFIG_ENV_SPI_* to Kconfig ... Browse Code »
    24

    This converts the following to Kconfig:
    CONFIG_ENV_SPI_BUS
    CONFIG_ENV_SPI_CS
    CONFIG_ENV_SPI_MAX_HZ
    CONFIG_ENV_SPI_MODE

    Most of time these value are not needed, CONFIG_SF_DEFAULT
    with same value is used, so I introduced CONFIG_USE_ENV_SPI_*
    to force the associated value for the environment.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     
  • 14453fbfa   Convert CONFIG_SF_DEFAULT_* to Kconfig ... Browse Code »
    36

    This converts the following to Kconfig:
    CONFIG_SF_DEFAULT_BUS
    CONFIG_SF_DEFAULT_CS
    CONFIG_SF_DEFAULT_MODE
    CONFIG_SF_DEFAULT_SPEED

    I use moveconfig script and then manual check on generated u-boot.cfg
    to solve the remaining issue.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     

08 Jan, 2019

1 commit

14 Dec, 2018

3 commits

04 Sep, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

08 Apr, 2018

1 commit

15 Feb, 2018

1 commit

  • 75670c81e   configs: Migrate CONFIG_SPL_FRAMEWORK ... Browse Code »

    Migrate the option CONFIG_SPL_FRAMEWORK and make this gate most of the
    current set of options we have in Kconfig. We will need to have some
    options available for SPL and !SPL_FRAMEWORK so this is important. In a
    few cases we re-order existing options so that we have less escapes from
    the SPL_FRAMEWORK guard.

    Signed-off-by: Tom Rini

    Tom Rini
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

21 Oct, 2017

1 commit

  • 8daec2d9d   net: Add SMC911X driver to Kconfig, convert ... Browse Code »

    We add the various SMC91XX symbols to drivers/net/Kconfig and then this
    converts the following to Kconfig:
    CONFIG_SMC911X
    CONFIG_SMC911X_BASE
    CONFIG_SMC911X_16_BIT
    CONFIG_SMC911X_32_BIT

    Signed-off-by: Adam Ford
    [trini: Apply to the rest of the tree, re-squash old and new patch]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

08 Sep, 2017

2 commits

28 Aug, 2017

1 commit

15 Aug, 2017

1 commit

26 Jul, 2017

1 commit

16 May, 2017

1 commit

21 Jan, 2017

1 commit

  • 40d5534cf   ARM: Default to using optimized memset and memcpy routines ... Browse Code »

    We have long had available optimized versions of the memset and memcpy
    functions that are borrowed from the Linux kernel. We should use these
    in normal conditions as the speed wins in many workflows outweigh the
    relatively minor size increase. However, we have a number of places
    where we're simply too close to size limits in SPL and must be able to
    make the size vs performance trade-off in those cases.

    Cc: Philippe Reynes
    Cc: Eric Jarrige
    Cc: Heiko Schocher
    Cc: Magnus Lilja
    Cc: Lokesh Vutla
    Cc: Chander Kashyap
    Cc: Akshay Saraswat
    Cc: Simon Glass
    Cc: Stefan Roese
    Signed-off-by: Tom Rini
    Acked-by: Stefan Roese
    Reviewed-by: Simon Glass

    Tom Rini
     

18 Jan, 2017

2 commits

11 Jan, 2017

1 commit

  • 55ed3b469   mmc: move CONFIG_DWMMC to Kconfig, renaming to CONFIG_MMC_DW ... Browse Code »

    This commit was created as follows:

    [1] Rename the option with the following command:
    find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
    -type f -print | xargs sed -i -e 's/CONFIG_DWMMC/CONFIG_MMC_DW/g'

    [2] create the entry for MMC_DW in drivers/mmc/Kconfig
    (the prompt and help were copied from Linux)

    [3] run "tools/moveconfig.py -y MMC_DW"

    [4] add "depends on MMC_DW" to the MMC_DW_ROCKCHIP entry

    [5] Clean-up doc/README.socfpga by hand

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Marek Vasut

    Masahiro Yamada
     

30 Dec, 2016

3 commits

  • 45a68fe26   mmc: move some SDHCI related options to Kconfig ... Browse Code »

    While I moved the options, I also renamed them so that they are all
    prefixed with MMC_SDHCI_.

    This commit was created in the following steps.

    [1] Rename with the following command
    find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
    -type f -print | xargs sed -i -e '
    s/CONFIG_MMC_SDMA/CONFIG_MMC_SDHCI_SDMA/g
    s/CONFIG_BCM2835_SDHCI/CONFIG_MMC_SDHCI_BCM2835/g
    s/CONFIG_KONA_SDHCI/CONFIG_MMC_SDHCI_KONA/g
    s/CONFIG_MV_SDHCI/CONFIG_MMC_SDHCI_MV/g
    s/CONFIG_S5P_SDHCI/CONFIG_MMC_SDHCI_S5P/g
    s/CONFIG_SPEAR_SDHCI/CONFIG_MMC_SDHCI_SPEAR/g
    '

    [2] create the Kconfig entries in drivers/mmc/Kconfig

    [3] Move the options by the following command
    tools/moveconfig.py -y MMC_SDHCI_SDMA MMC_SDHCI_BCM2835 \
    MMC_SDHCI_KONA MMC_SDHCI_MV MMC_SDHCI_S5P MMC_SDHCI_SPEAR

    [4] Sort drivers/mmc/Makefile for readability

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Tom Rini
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     
  • e1ce61fbb   mmc: move CONFIG_SDHCI to Kconfig, renaming to CONFIG_MMC_SDHCI ... Browse Code »

    Move CONFIG_SDHCI to Kconfig and rename it to CONFIG_MMC_SDHCI.
    My motivation for the rename is, ultimately, to make all the MMC
    options prefixed with MMC_ and SDHCI options with MMC_SDHCI_,
    like Linux.

    This commit was created as follows:

    [1] Rename the config option with the following command:
    find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
    -type f -print | xargs sed -i -e 's/CONFIG_SDHCI/CONFIG_MMC_SDHCI/g'

    [2] create the entry for MMC_SDHCI in drivers/mmc/Kconfig

    [3] run "tools/moveconfig.py -y MMC_SDHCI"

    [4] add "depends on MMC_SDHCI" to existing SDHCI driver entries

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Tom Rini
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     
  • 187809517   Sync defconfig files by savedefconfig ... Browse Code »

    Generated by "tools/moveconfig -s".

    This will make config moves easier.

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

04 Dec, 2016

1 commit

  • 3337e3af5   Enable DISTRO_DEFAULT on platforms that missed it before ... Browse Code »
    20

    A number of platforms had been using the distro default feature before
    it was moved to Kconfig but did not enable the new Kconfig option when
    it was enabled. This caused a regression in terms of features and this
    introduces breakage when more things move to Kconfig.

    Signed-off-by: Tom Rini

    Tom Rini
     

24 Oct, 2016

2 commits

20 Sep, 2016

1 commit