24 Feb, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_BOOTP_BOOTPATH
CONFIG_BOOTP_DNS
CONFIG_BOOTP_GATEWAY
CONFIG_BOOTP_HOSTNAME
CONFIG_BOOTP_PXE
CONFIG_BOOTP_SUBNETMASK
CONFIG_CMDLINE_EDITING
CONFIG_AUTO_COMPLETE
CONFIG_SYS_LONGHELP
CONFIG_SUPPORT_RAW_INITRD
CONFIG_ENV_VARS_UBOOT_CONFIGSigned-off-by: Adam Ford
[trini: Re-run the migration]
Signed-off-by: Tom Rini
11 Feb, 2018
1 commit
-
On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
values into the defconfig and removing them from the headers.I did not attempt to add more default values in and for now will leave
that to maintainers.Signed-off-by: Tom Rini
29 Jan, 2018
1 commit
-
We want to use Kconfig logic to depend on whether pl01x devices
are built in, so let's convert their inclusion selection to Kconfig.This round goes to pl011.
Signed-off-by: Alexander Graf
04 Sep, 2017
4 commits
-
This commit removes definitions of CONFIG_SYS_BARGSIZE defined to be
equal to CONFIG_SYS_CBSIZE in numerous configuration files.We remove such definitions in two situations:
- CONFIG_SYS_CBSIZE is otherwise not defined in the board
configuration file, which means the default value of
CONFIG_SYS_CBSIZE == 256 applies. In this case, the default value
of CONFIG_SYS_BARGSIZE == 512 (common/image.c) is suitable, as it is
larger.- CONFIG_SYS_CBSIZE is defined in the board configuration file, but
to a value equal or less than 512. In this case, the default value
of CONFIG_SYS_BARGSIZE == 512 (common.image.c) is suitable, as it
is equal or larger.Signed-off-by: Thomas Petazzoni
Reviewed-by: Tom Rini -
Now that include/config_fallbacks.h define a sane fallback for
CONFIG_SYS_MAXARGS, we can drop the definition of this constant in all
configurations that were using the default value.Signed-off-by: Thomas Petazzoni
Reviewed-by: Tom Rini -
Now that the fallback value of CONFIG_SYS_PBSIZE in
include/config_fallbacks.h has been adjusted, remove its definition
from a large number of board configuration files.Signed-off-by: Thomas Petazzoni
Reviewed-by: Tom Rini -
Now that include/config_fallbacks.h define a sane fallback for
CONFIG_SYS_CBSIZE, we can drop the definition of this constant in all
configurations that were using the default value.Signed-off-by: Thomas Petazzoni
Reviewed-by: Tom Rini
[trini: Drop from stih410-b2260.h]
Signed-off-by: Tom Rini
15 Aug, 2017
1 commit
-
Also introduce CONFIG_USE_BOOTARGS option so we can control if
CONFIG_BOOTARGS defined at all.Signed-off-by: Sam Protsenko
[trini: Resync r8a779[56]_ulcb, various ls10xx targets]
Signed-off-by: Tom Rini
12 Aug, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_SAVESSigned-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich
09 Aug, 2017
1 commit
-
Reviewed-by: Joe Hershberger
Signed-off-by: Tom Rini
01 Aug, 2017
1 commit
-
Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS
CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the
defconfig files.Tested-by: Adam Ford
Signed-off-by: Tom Rini
Reviewed-by: Bin Meng
22 May, 2017
1 commit
-
This option is not used in U-Boot. Drop it.
Signed-off-by: Simon Glass
20 Mar, 2017
1 commit
-
Move this in to Kconfig with a default of 115200.
Signed-off-by: Philipp Tomsich
[trini: Run moveconfig.py, reword commit slightly]
Signed-off-by: Tom Rini
26 Jan, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_BOARD_EARLY_INIT_FSigned-off-by: Simon Glass
24 Oct, 2016
1 commit
-
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_INFO_QUIETSigned-off-by: Simon Glass
[trini: Make this default n, re-run the migration]
Signed-off-by: Tom Rini
12 Oct, 2016
1 commit
-
Create a Kconfig entry for DISPLAY_CPUINFO and make it be the default
in certain architectures. Migrate all config files.Signed-off-by: Lokesh Vutla
Signed-off-by: Tom Rini
20 Sep, 2016
1 commit
-
Move the config IDENT_STRING to Kconfig and migrate all boards
[sivadur: Migrate zynq boards]
Signed-off-by: Siva Durga Prasad Paladugu
[trini: Update configs, add some default to sunxi Kconfig]
Signed-off-by: Tom Rini
02 Jul, 2016
1 commit
-
As the help message of CONFIG_BOOTDELAY says, CONFIG_BOOTDELAY=-2
means the autoboot with no delay, with no abort check even if
CONFIG_ZERO_BOOTDELAY_CHECK is defined.To sum up, the autoboot behaves as follows:
[1] CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=y
autoboot with no delay, but you can abort it by key input[2] CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=n
autoboot with no delay, with no check for abort[3] CONFIG_BOOTDELAY=-1
disable autoboot[4] CONFIG_BOOTDELAY=-2
autoboot with no delay, with no check for abortAs you notice, [2] and [4] come to the same result, which means we
do not need CONFIG_ZERO_BOOTDELAY_CHECK. We can control all the
cases only by CONFIG_BOOTDELAY, like this:[1] CONFIG_BOOTDELAY=0
autoboot with no delay, but you can abort it by key input[2] CONFIG_BOOTDELAY=-1
disable autoboot[3] CONFIG_BOOTDELAY=-2
autoboot with no delay, with no check for abortThis commit converts the logic as follow:
CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=n
--> CONFIG_BOOTDELAY=-2Signed-off-by: Masahiro Yamada
Reviewed-by: Stefan Roese
Acked-by: Igor Grinberg
Reviewed-by: Simon Glass
Acked-by: Vladimir Zapolskiy
Reviewed-by: Heiko Schocher
Acked-by: Christian Riesch
Acked-by: Hannes Schmelzer
10 Jun, 2016
1 commit
-
move CONFIG_BOOTDELAY into a Kconfig option. Used for this
purpose the moveconfig.py tool in tools.Signed-off-by: Heiko Schocher
Reviewed-by: Tom Rini
Acked-by: Viresh Kumar
Acked-by: Igor Grinberg
17 May, 2016
1 commit
-
This patch moves all appearances of CONFIG_SYS_I2C_DW from the config
header to the defconfig files.Signed-off-by: Stefan Roese
Cc: Heiko Schocher
Cc: Alexey Brodkin
26 Apr, 2016
3 commits
-
Update the config.h and defconfig files for the commands that 8e3c036
converted over to KconfigSigned-off-by: Tom Rini
-
A number of moveconfig.py runs have left a instances of multiple empty
lines in a row. Correct this to a single empty line.Signed-off-by: Tom Rini
-
This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND. Due to how we have used this historically
we need to take further care here when converting.Signed-off-by: Tom Rini
06 Feb, 2016
1 commit
-
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).Signed-off-by: Bin Meng
Reviewed-by: Heiko Schocher
Reviewed-by: Simon Glass
Reviewed-by: Minkyu Kang
22 Dec, 2015
1 commit
-
Select PHYLIB in drivers/net/Kconfig. And remove CONFIG_PHYLIB
from legacy board header files.This fixed the warnings when both ALTERA_TSE and ETH_DESIGNWARE
are selected.Signed-off-by: Thomas Chou
Reported-by: Pavel Machek
Acked-by: Chin Liang See
Acked-by: Pavel Machek
Tested-by: Pavel Machek
Reviewed-by: Bin Meng
25 Oct, 2015
1 commit
-
We have finished Generic Board conversion for ARM and PowerPC, i.e.
all the boards have been converted except OpenRISC, SuperH, SPARC,
which have not supported Generic Board framework yet.Select SYS_GENERIC_BOARD in arch/Kconfig and delete all the macro
defines in include/configs/*.h.Signed-off-by: Masahiro Yamada
28 Sep, 2015
1 commit
-
The config option has been removed by one of the syncs with the Linux
mainline MTD subsystem:
ff94bc40af (mtd, ubi, ubifs: resync with Linux-3.14)
It has been left inside the config files. Currently does not look to
serve any purpose, so remove it now from all the configs.Signed-off-by: Igor Grinberg
Cc: Matthias Fuchs
Cc: Stefan Roese
Cc: "Albert ARIBAUD (3ADEV)"
Cc: Peter Barada
Cc: Steve Sakoman
Cc: Peter Tyser
Cc: Joe Hershberger
Cc: Simon Glass
Acked-by: Stefan Roese
13 Aug, 2015
1 commit
-
Add option to set shell prompt string from menuconfig and migrate
boards globally.The migration is done as follows:
- Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the
entry moved to their defconfig files.
- Boards that defined some kind of #ifdef logic which selects the
CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT
right before the #ifdef logic and were left alone.
- This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus
CONFIG_SYS_PROMPT was removed from all _common.h and _common.h
files. This results in a streamlined default value across platforms, and
includes the following files: spear-common, sunxi-common, mv-common,
ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common.
- Boards that relied on _common.h values of CONFIG_SYS_PROMPT were
not updated in their respective defconfig files under the assumption that
since they did not explicitly define a value, they're fine with whatever
the default is.
- On the other hand, boards that relied on a value defined in some
_common.h file such as woodburn_common, rpi-common,
bur_am335x_common, ls2085a_common, siemens_am33x_common, and
omap3_evm_common, had their values moved to the respective defconfig files.
- The define V_PROMPT was removed, since it is not used anywhere except for
assigning a value for CONFIG_SYS_PROMPT.Cc: Tom Rini
Cc: Masahiro Yamada
Cc: Stefano Babic
Cc: Igor Grinberg
Signed-off-by: Nikita Kiryanov
[trini: Add spring, sniper, smartweb to conversion]
Signed-off-by: Tom Rini
26 Jun, 2015
1 commit
-
This sets the default commands Kconfig to match
include/config_cmd_default.h commands in the common/Kconfig and removes
them from include/configs.Signed-off-by: Joe Hershberger
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
Signed-off-by: Tom Rini
09 Jun, 2015
1 commit
-
This patch moves the following config options to Kconfig:
CONFIG_AUTOBOOT_KEYED
CONFIG_AUTOBOOT_PROMPT
CONFIG_AUTOBOOT_DELAY_STR
CONFIG_AUTOBOOT_STOP_STR
AUTOBOOT_KEYED_CTRLCSigned-off-by: Stefan Roese
Reviewed-by: Simon Glass
[trini: Drop ip04 and pm9263 configs/ additions, those boards previously
set CONFIG_AUTOBOOT_PROMPT but never used it, re-run savedefconfig over
all boards that did change. Make digsy_mtc_* string include seconds to
match others and not warn. ]
Signed-off-by: Tom Rini
Cc: Masahiro Yamada
02 Jun, 2015
1 commit
-
CONFIG_NET_MULTI is not used anywhere and thus can safely be removed
from the configs.Acked-by: Marek Vasut
Acked-by: Viresh Kumar
Signed-off-by: Lars Poeschel
01 Jun, 2015
1 commit
-
This also selects CONFIG_NET for any CONFIG_CMD_NET board.
Remove the imx default for CONFIG_NET.
This moves the config that was defined by 60296a8 (commands: add more
command entries in Kconfig).Signed-off-by: Joe Hershberger
19 Apr, 2015
1 commit
-
Move this to Kconfig and clean up board config files that use it. Also
rename it to CONFIG_ETH_DESIGNWARE to fit with the naming that exists
in drivers/net/Kconfig.Signed-off-by: Simon Glass
Version 1:
Acked-by: Joe Hershberger
06 Mar, 2015
1 commit
-
Without this change the board support for these SPEAr boards would
be dropped soon. Generic board support seems to work just fine.Signed-off-by: Stefan Roese
Cc: Viresh Kumar
Cc: Vipin Kumar
Acked-by: Viresh Kumar
29 Oct, 2014
1 commit
-
In preparation for the SoCFPGA support of the designware I2C driver,
convert this driver to the common CONFIG_SYS_I2C framework.This patch converts all users of this driver, this is:
- ST spearxxx boards
- AXS101 (ARC700 platform)I couldn't test this patch on those boards. Only compile tested for all
spear boards. And tested on SoCFPGA.Signed-off-by: Stefan Roese
Reviewed-by: Marek Vasut
Acked-by: Alexey Brodkin
Tested-by: Alexey Brodkin
Cc: Heiko Schocher
Cc: Vipin Kumar
Cc: Jeroen Hofstee
20 Feb, 2014
1 commit
-
Having CONFIG_SYS_I2C_BASE requires DW I2C driver to explicitly include
which other platforms may not have at all.It's always good to have a driver platform-independent.
Signed-off-by: Alexey Brodkin
Cc: Tom Rini
Cc: Heiko Schocher
Cc: Stefan Roese
Cc: Vipin Kumar
Cc: Armando Visconti
07 Feb, 2014
1 commit
-
With this change driver will benefit from existing phylib and thus
custom phy functionality implemented in the driver will go away:
* Instantiation of the driver is now much shorter - 2 parameters
instead of 4.
* Simplified phy management/functoinality in driver is replaced with
rich functionality of phylib.
* Support of custom phy initialization is now done with existing
"board_phy_config".Note that after this change some previously used config options
(driver-specific PHY configuration) will be obsolete and they are simply
substituted with similar options of phylib.For example:
* CONFIG_DW_AUTONEG - no need in this one. Autonegotiation is enabled
by default.
* CONFIG_DW_SEARCH_PHY - if one wants to specify attached phy
explicitly CONFIG_PHY_ADDR board config option has to be used, otherwise
automatically the first discovered on MDIO bus phy will be usedI believe there's no need now in "doc/README.designware_eth" because
user only needs to instantiate the driver with "designware_initialize"
whose prototype exists in "include/netdev.h".Cc: Joe Hershberger
Cc: Vipin Kumar
Cc: Stefan Roese
Cc: Mischa Jonker
Cc: Shiraz Hashim
Cc: Albert ARIBAUD
Cc: Amit Virdi
Cc: Sonic Zhang
Signed-off-by: Alexey Brodkin
05 Nov, 2013
1 commit
-
Remove platform CONFIG_SYS_HZ definition for configs a-z*.
Signed-off-by: Rob Herring
24 Jul, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
01 Sep, 2012
1 commit
-
CONFIG_STACKSIZE is not referenced anywhere except on AVR32, but present
in most ARM board config files.IRQs are only enabled for 1 config, so remove the unused config options
for IRQ and FIQ stack size as well.Cc: Albert ARIBAUD
Signed-off-by: Rob Herring