09 Dec, 2013
1 commit
-
Signed-off-by: Andreas Bießmann
Acked-by: Jens Scharsig (BuS Elektronik)
Tested-by: Jens Scharsig (BuS Elektronik)
Acked-by: Scott Wood
02 Dec, 2013
1 commit
-
add common phy reset code into a common function.
Signed-off-by: Heiko Schocher
Cc: Andreas Bießmann
Cc: Bo Shen
Cc: Jens Scharsig
Cc: Sergey Lapin
Cc: Stelian Pop
Cc: Albin Tonnerre
Cc: Eric Benard
Cc: Markus Hubig
Acked-by: Jens Scharsig (BuS Elektronik)
Tested-by: Jens Scharsig (BuS Elektronik)
Tested-by: Bo Shen
Acked-by: Bo Shen
Signed-off-by: Andreas Bießmann
01 Nov, 2013
1 commit
-
Signed-off-by: Masahiro Yamada
Cc: Albert ARIBAUD
Cc: Andreas Bießmann
Cc: Stefano Babic
Cc: Prafulla Wadaskar
Cc: Minkyu Kang
Cc: Vipin Kumar
Cc: Tom Warren
Cc: Tom Rini
24 Jul, 2013
2 commits
-
The sandburst-specific i2c drivers have been deleted, conflict was just
over the SPDX conversion.Conflicts:
board/sandburst/common/ppc440gx_i2c.c
board/sandburst/common/ppc440gx_i2c.hSigned-off-by: Tom Rini
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
23 Jul, 2013
1 commit
-
- added to soft_i2c driver new multibus/multiadpater support
- adapted all config files, which uses this driverSigned-off-by: Heiko Schocher
Cc: Simon Glass
Cc: Stephen Warren
01 Sep, 2012
1 commit
-
A lot of at91 boards have the console_init_f in board_init. This is useless
cause it was called before by generic code in lib/board.c.Signed-off-by: Andreas Bießmann
cc: Jens Scharsig
cc: Stelian Pop
cc: Sedji Gaouaou
cc: Albin Tonnerre
cc: Eric Benard
Tested-by: voice.shen@atmel.com
Tested-by: voice.shen@atmel.com
Acked-by: Jens Scharsig (BuS Elektronik)
Tested-by: Jens Scharsig (BuS Elektronik)
29 Nov, 2011
1 commit
-
Change my old email address which is no longer valid.
Signed-off-by: Stelian Pop
Signed-off-by: Anatolij Gustschin
16 Oct, 2011
1 commit
-
The top level Makefile does not do any recursion into subdirs when
cleaning, so these clean/distclean targets in random arch/board dirs
never get used. Punt them all.MAKEALL didn't report any errors related to this that I could see.
Signed-off-by: Mike Frysinger
13 Sep, 2011
1 commit
-
Result of running the following command to address Wolfgang's
comment about camel case:for file in `find . | grep '\.[chS]$'`; do perl -i -pe
's/(green|yellow|red|blue)_LED_(on|off)/$1_led_$2/g' $file; doneDiscussion:
http://patchwork.ozlabs.org/patch/84988/Signed-off-by: Jason Kridner
Signed-off-by: Joel A Fernandes
Signed-off-by: Sandeep Paulraj
17 Jul, 2011
1 commit
-
Checkpatch.pl complains about the volatile qualifier in calls to
get_ram_size(). Remove this qualifier in the prototype and in the
calls where it is useless, and leave it only in the function body
where it is needed.Signed-off-by: Albert ARIBAUD
04 Jul, 2011
1 commit
-
Signed-off-by: Andreas Bießmann
Cc: Eric Bénard
22 Jun, 2011
2 commits
-
Signed-off-by: Eric Bénard
-
Signed-off-by: Eric Bénard
28 Apr, 2011
2 commits
-
- fix board support following relocation changes
- switch to boards.cfg
- disable i2c to keep size under 128kiB (1 sector)Signed-off-by: Eric Bénard
-
- update to new relocation code
- switch to boards.cfg
- get rid of LEGACY (still a little hack in .h to compile)
- add nand boot configuration
- boot tested for the following configurations :
9260 (64MB RAM & nor boot)
9260_nand (64MB RAM & nand boot)
9G20_128M (128MB RAM & nor boot)
9G20_nand_128M (128MB RAM & nand boot)
(nor boot is using lowlevel init)Signed-off-by: Eric Bénard
18 Nov, 2010
1 commit
-
Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils. As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.The name of each former library archive is preserved except for
extensions which change from ".a" to ".o". This commit updates
references accordingly where needed, in particular in some linker
scripts.This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols. Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.Signed-off-by: Sebastien Carlier
19 Oct, 2010
1 commit
-
The change is currently needed to be able to remove the board
configuration scripting from the top level Makefile and replace it by
a simple, table driven script.Moving this configuration setting into the "CONFIG_*" name space is
also desirable because it is needed if we ever should move forward to
a Kconfig driven configuration system.Signed-off-by: Wolfgang Denk
20 Aug, 2010
1 commit
-
convert the board to the new soc architecture
update default config
i2c upgrade taken from eb_cpux9k2.h & board/BuS/eb_cpux9k2/cpux9k2.cSigned-off-by: Eric Bénard
Signed-off-by: Reinhard Meyer
12 Jul, 2010
1 commit
-
Also, remove all calls to eth_init() in boards that use MACB
Signed-off-by: Ben Warren
01 Feb, 2010
1 commit
-
* add's at91_emac (AT91RM9200) network driver (NET_MULTI api)
* enable driver with CONFIG_DRIVER_AT91EMAC
* generic PHY initialization
* modify AT91RM9200 boards to use NET_MULTI driver
* the drivers has been tested with LXT971 Phy and DM9161 Phy at
MII and RMII interfaceSigned-off-by: Jens Scharsig
Signed-off-by: Ben Warren
19 Oct, 2009
1 commit
-
Signed-off-by: Eric Benard
Signed-off-by: Tom Rix
13 Oct, 2009
2 commits
-
these boards are built around Atmel's AT91SAM9260/9G20 and have
up to 64MB of NOR flash, up to 128MB of SDRAM, up to 2GB of NAND
and include a 10/100 Ethernet PHY in RMII mode.Signed-off-by: Eric Benard
Signed-off-by: Tom Rix -
CPUAT91 is built around Atmel's AT91RM9200 and has up to 16MB of NOR
flash, up to 128MB of SDRAM, and includes a Micrel KS8721 PHY in RMII
mode.Signed-off-by: Eric Benard
Signed-off-by: Tom Rix