18 Jan, 2020
1 commit
-
At present panic() is in the vsprintf.h header file. That does not seem
like an obvious choice for hang(), even though it relates to panic(). So
let's put hang() in its own header.Signed-off-by: Simon Glass
[trini: Migrate a few more files]
Signed-off-by: Tom Rini
15 Dec, 2019
1 commit
-
At present if CONFIG_SPL_GPIO_SUPPORT is enabled then the GPIO uclass
is included in SPL/TPL without any control for boards. Some boards may
want to disable this to reduce code size where GPIOs are not needed in
SPL or TPL.Add a new Kconfig option to permit this. Default it to 'y' so that
existing boards work correctly.Change existing uses of CONFIG_DM_GPIO to CONFIG_IS_ENABLED(DM_GPIO) to
preserve the current behaviour. Also update the 74x164 GPIO driver since
it cannot build with SPL.This allows us to remove the hacks in config_uncmd_spl.h and
Makefile.uncmd_spl (eventually those files should be removed).Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
12 Aug, 2019
5 commits
-
This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.Acked-by: Joe Hershberger
Signed-off-by: Simon Glass -
Move env_get() over to the new header file.
Acked-by: Joe Hershberger
Signed-off-by: Simon Glass -
Move env_set() over to the new header file.
Acked-by: Joe Hershberger
Signed-off-by: Simon Glass -
Move env_get_yesno() over to the new header file.
Signed-off-by: Simon Glass
Acked-by: Joe Hershberger -
Move env_init() over to the new header file.
Signed-off-by: Simon Glass
Acked-by: Joe Hershberger
23 Jun, 2019
1 commit
-
Converted to use fsl_esdhc_imx for i.MX platforms.
Signed-off-by: Yangbo Lu
Tested-by: Steffen Dirkwinkel
Reviewed-by: Peng Fan
Reviewed-by: Lukasz Majewski
Reviewed-by: Martyn Welch
Acked-by: Jason Liu
13 Mar, 2019
2 commits
-
Signed-off-by: Tim Harvey
-
Signed-off-by: Tim Harvey
16 Feb, 2019
14 commits
-
device-tree paths should never be used that reference node addresses
making an assumption about leading zeros. They should not be there per
the device-tree specification however they have been there until Linux
4.15 when they were removed via kernel commit
8dccafaa281aa1d240a58bbcdff338aec114a021.This fixes various issues which will occur when using Linux 4.15+
that are being fixed up on a per model per PCB revision basis such as:
- enabling MMC UHS-I on board revisions that support it
- enabling PWM based on hwconfig
- fixing PCIe reset on GW552x
- removing cpu external watchdog reset on boards that do not support it
- populate PCI dt nodes based on PCI scan in order to fix GW16082
interrupt mapping and inject MAC address for PCI based GbESigned-off-by: Tim Harvey
-
The GW5904/GW5909 have a SP33E multi-protocol serial transceiver which we
want to configure to RS232 by default (by de-asserting RS485_EN)Signed-off-by: Tim Harvey
-
Signed-off-by: Tim Harvey
-
The GW5909 is a small single board computer based on the i.MX6DL SoC
with the same peripheral set as the GW5904 but with half the DRAM loaded
and an additional RS232 transceiver off UART2.Signed-off-by: Tim Harvey
-
The GW5908 is a small single board computer based on the i.MX6DL SoC
with the same peripheral set as the GW530x but with 1GiB density DRAM
(64bit 512MiB).Signed-off-by: Tim Harvey
-
The GW5907 is a small single board computer based on the i.MX6DL SoC
with the following peripheral set:
- DDR3 memory (512MB default)
- 1x GigE (i.MX6 FEC)
- Gateworks System ControllerSigned-off-by: Tim Harvey
-
The GW5906 is a GW552x with mechanical and power supply connector
differences.Signed-off-by: Tim Harvey
-
Signed-off-by: Tim Harvey
-
Signed-off-by: Tim Harvey
-
Signed-off-by: Tim Harvey
-
The GW5905 is single-board tablet computer based on the i.MX6 SoC with the
following peripheral set:
- eMMC flash (boot device)
- microSD expansion
- LVDS display connector for off-board 3D+1C with PWM backlight
and I2C based touch controller
- MIPI camera connector supporting the TRULY CM8487-B500SA-E (OV5640)
- ublox EMMY-W1 WiFi/Bluetooth/NFC module (SDIO/UART)
- ublox ZOE-M8Q GPS
- LSM9DS1 9-DOF IMU
- 1x 1-lane miniPCIe socket with USB 2.0
- Gateworks System Controller
- Audio jack with TLV320AIC Audio Codec, Speaker AMP
and TSA227E Headphone detect
- MAX8607 3-mode LED camera flash
- DECT ULE module
- FUSB302 USB-C PD and ISL9238 Battery chargerSigned-off-by: Tim Harvey
-
Do not setup I2C3 in the SPL for Ventana as some devices on that bus
(aic3x codecs) can hang the bus causing i2c_setup to spin endlessly until
they are put into reset. Removing the setup of I2C3 from the SPL allows
the board-specific GPIO to be configured to take care of putting codecs
in reset prior to U-Boot setting up I2C3.Signed-off-by: Tim Harvey
-
The only UART that is garunteed on Ventana boards is UART2 (serial-console).
Remove UART1 pinmux as that it is not consistent across all Ventana boards
and U-Boot doesn't need it.Signed-off-by: Tim Harvey
-
Signed-off-by: Tim Harvey
25 Jul, 2018
1 commit
-
Add 'const' (also 'static' in some places) to struct node_info
arrays to save memory footprint.Signed-off-by: Masahiro Yamada
07 May, 2018
1 commit
-
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.Signed-off-by: Tom Rini
28 Apr, 2018
1 commit
-
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.Signed-off-by: Tom Rini
09 Apr, 2018
1 commit
-
In order that we can use eth_env_* even when CONFIG_NET isn't set, move
these functions to environment code from net code.This fixes failures such as:
board/ti/am335x/built-in.o: In function `board_late_init':
board/ti/am335x/board.c:752: undefined reference to `eth_env_set_enetaddr'
u-boot/board/ti/am335x/board.c:766: undefined reference to `eth_env_set_enetaddr'which caters for use cases such as:
commit f411b5cca48f ("board: am335x: Always set eth/eth1addr environment
variable")when Ethernet is required in Linux, but not U-Boot.
Signed-off-by: Alex Kiernan
12 Jan, 2018
2 commits
-
The command can only be used from full U-Boot, so do not build it into
SPL.Cc: Stefano Babic
Cc: Fabio Estevam
Cc: Tim Harvey
Signed-off-by: Tom Rini
Acked-by: Tim Harvey
Reviewed-by: Fabio Estevam -
The command can only be used from full U-Boot, so do not build it into
SPL.Cc: Stefano Babic
Cc: Fabio Estevam
Cc: Tim Harvey
Signed-off-by: Tom Rini
Acked-by: Tim Harvey
Reviewed-by: Fabio Estevam
18 Sep, 2017
1 commit
-
bss section is cleared in crt0.S. board_init_r() is also
entered from crt0 code.Signed-off-by: Anatolij Gustschin
Cc: Christian Gmeiner
Cc: Nikita Kiryanov
Cc: Jagan Teki
Cc: Tim Harvey
Cc: Marek Vasut
Cc: Lukasz Majewski
Cc: Fabio Estevam
Reviewed-by: Lukasz Majewski
Reviewed-by: Christian Gmeiner
Reviewed-by: Fabio Estevam
28 Aug, 2017
1 commit
-
Since the gpr_init() function is common for boards using MX6S, MX6DL, MX6D,
MX6Q and MX6QP processors move it to the soc.c file.Signed-off-by: Breno Lima
Acked-by: Stefano Babic
Reviewed-by: Lukasz Majewski
Reviewed-by: Fabio Estevam
16 Aug, 2017
5 commits
-
We are now using an env_ prefix for environment functions. Rename these
for consistency. Also add function comments in common.h.Suggested-by: Wolfgang Denk
Signed-off-by: Simon Glass -
We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.Suggested-by: Wolfgang Denk
Signed-off-by: Simon Glass -
Rename this function for consistency with env_set().
Signed-off-by: Simon Glass
-
We are now using an env_ prefix for environment functions. Rename setenv()
for consistency. Also add function comments in common.h.Suggested-by: Wolfgang Denk
Signed-off-by: Simon Glass -
This is a strange name for a function that loads the environment. There is
now only one implementation of this function, so use the new env_load()
function directly instead.Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
12 Jul, 2017
2 commits
-
Change is consistent with other SOCs and it is in preparation
for adding SOMs. SOC's related files are moved from cpu/ to
mach-imx/.This change is also coherent with the structure in kernel.
Signed-off-by: Stefano Babic
CC: Fabio Estevam
CC: Akshay Bhat
CC: Ken Lin
CC: Marek Vasut
CC: Heiko Schocher
CC: "Sébastien Szymanski"
CC: Christian Gmeiner
CC: Stefan Roese
CC: Patrick Bruenn
CC: Troy Kisky
CC: Nikita Kiryanov
CC: Otavio Salvador
CC: "Eric Bénard"
CC: Jagan Teki
CC: Ye Li
CC: Peng Fan
CC: Adrian Alonso
CC: Alison Wang
CC: Tim Harvey
CC: Martin Donnelly
CC: Marcin Niestroj
CC: Lukasz Majewski
CC: Adam Ford
CC: "Albert ARIBAUD (3ADEV)"
CC: Boris Brezillon
CC: Soeren Moch
CC: Richard Hu
CC: Wig Cheng
CC: Vanessa Maegima
CC: Max Krummenacher
CC: Stefan Agner
CC: Markus Niebel
CC: Breno Lima
CC: Francesco Montefoschi
CC: Jaehoon Chung
CC: Scott Wood
CC: Joe Hershberger
CC: Anatolij Gustschin
CC: Simon Glass
CC: "Andrew F. Davis"
CC: "Łukasz Majewski"
CC: Patrice Chotard
CC: Nobuhiro Iwamatsu
CC: Hans de Goede
CC: Masahiro Yamada
CC: Stephen Warren
CC: Andre Przywara
CC: "Álvaro Fernández Rojas"
CC: York Sun
CC: Xiaoliang Yang
CC: Chen-Yu Tsai
CC: George McCollister
CC: Sven Ebenfeld
CC: Filip Brozovic
CC: Petr Kulhavy
CC: Eric Nelson
CC: Bai Ping
CC: Anson Huang
CC: Sanchayan Maity
CC: Lokesh Vutla
CC: Patrick Delaunay
CC: Gary Bisson
CC: Alexander Graf
CC: u-boot@lists.denx.de
Reviewed-by: Fabio Estevam
Reviewed-by: Christian Gmeiner -
At present CONFIG_CMD_SATA enables the 'sata' command which also brings
in SATA support. Some boards may wish to enable SATA without the command.
Add a separate CONFIG to permit this.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
05 Jun, 2017
1 commit
-
Include this header where needed so we do not need to rely on common.h.
Signed-off-by: Simon Glass