Eric Lee / smarc-uboot

20 Jul, 2019

2 commits

08 May, 2019

3 commits

  • 2666bd42c   arm: rockchip: rk3399: Move common configs in Kconfig ... Browse Code »

    Few SPL and U-Boot proper configs are common to all rk3399 target
    defconfigs, move them and select it from platform kconfig.

    Moved configs:
    - SPL_ATF
    - SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
    - SPL_LOAD_FIT
    - SPL_CLK if SPL
    - SPL_PINCTRL if SPL
    - SPL_RAM if SPL
    - SPL_REGMAP if SPL
    - SPL_SYSCON if SPL
    - CLK
    - FIT
    - PINCTRL
    - RAM
    - REGMAP
    - SYSCON
    - DM_PMIC
    - DM_REGULATOR_FIXED

    Signed-off-by: Jagan Teki
    Reviewed-by: Kever Yang

    Jagan Teki
     
  • 695dca9a4   Kconfig: Add default SPL_FIT_GENERATOR for rockchip ... Browse Code »

    Add default SPL_FIT_GENERATOR py script for rockchip platforms if
    specific target enabled SPL_LOAD_FIT.

    So, this would help get rid of explicitly mentioning the default
    SPL FIT generator in defconfigs. however some targets, like puma_rk3399
    still require their own FIT generator so in those cases the default will
    override with defconfig defined generator.

    Reviewed-by: Paul Kocialkowski
    Signed-off-by: Jagan Teki
    Reviewed-by: Kever Yang

    Jagan Teki
     
  • bdc000801   rockchip: rk3399: update defconfig for TPL ... Browse Code »

    The SPL is now running at SDRAM, and 0x10000 is used by BL31,
    and the ARM SPL do not support relocate now, we need reserved
    0x50000 so that it won't overwrite the code when we load the
    bl31 to target space.
    We should remove this after we enable the relocate feature.

    The SPL need malloc 0x9000 for MMC as buffer used for transfer
    data to IRAM(The EMMC DMA can not transfer data to IRAM directly).

    Signed-off-by: Kever Yang

    Kever Yang
     

30 Apr, 2019

2 commits

26 Mar, 2019

1 commit

  • 14453fbfa   Convert CONFIG_SF_DEFAULT_* to Kconfig ... Browse Code »
    36

    This converts the following to Kconfig:
    CONFIG_SF_DEFAULT_BUS
    CONFIG_SF_DEFAULT_CS
    CONFIG_SF_DEFAULT_MODE
    CONFIG_SF_DEFAULT_SPEED

    I use moveconfig script and then manual check on generated u-boot.cfg
    to solve the remaining issue.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     

01 Feb, 2019

1 commit

08 Jan, 2019

1 commit

04 Sep, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

21 Jul, 2018

1 commit

  • a2a5053a1   rockchip: utilize CONFIG_DEFAULT_FDT_FILE ... Browse Code »

    Currently the fdtfile environment variable is set to
    CONFIG_DEFAULT_DEVICE_TREE which is іnternally used as U-Boot devicetree
    source. The OS can use a different filename and Kconfig gives us the
    ability to select a default devicetree via CONFIG_DEFAULT_FDT_FILE.
    This also gives user configuring U-Boot via menuconfig the behaviour
    someone would expect.

    Signed-off-by: Klaus Goger
    Tested-By: Vagrant Cascadian
    Reviewed-by: Philipp Tomsich
    Acked-by: Philipp Tomsich

    Klaus Goger
     

04 Jun, 2018

1 commit

26 Apr, 2018

1 commit

09 Apr, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

03 Jan, 2018

1 commit

  • e2a75f022   rockchip: firefly-rk3399: enable SPL_ATF_NO_PLATFORM_PARAM ... Browse Code »

    The Rockchip-released ATF for the Firefly apparently (i.e. Kever
    reported this) does not tolerate a FDT being passed as the platform
    parameter and will run into a hard stop.

    To work around this limitation in the ATF parameter handling, we
    enable SPL_ATF_NO_PLATFORM_PARAM (which will force passing NULL for
    the platform parameters).

    Note that this only affects this platform, as the ATF releases for the
    RK3368 and RK3399 have always either ignored the platform parameter
    (i.e. before the FDT-based parameters were supported) or support
    receiving a pointer to a FDT.

    Signed-off-by: Philipp Tomsich
    Reviewed-by: Kever Yang

    Philipp Tomsich
     

19 Dec, 2017

1 commit

  • 1a066c22f   rockchip: firefly-rk3399: add FIT for rk3399 ... Browse Code »

    Enable SPL_FIT_GENERATOR with path for it.
    With this patch you can get u-boot.itb for rk3399-firefly with:
    > make u-boot.itb

    Signed-off-by: Kever Yang
    Reviewed-by: Mark Kettenis
    Tested-by: Mark Kettenis
    Acked-by: Philipp Tomsich
    Reviewed-by: Philipp Tomsich

    Kever Yang
     

18 Dec, 2017

1 commit

26 Nov, 2017

1 commit

07 Nov, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

08 Sep, 2017

2 commits

05 Sep, 2017

1 commit

28 Aug, 2017

1 commit

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

11 Jul, 2017

1 commit

19 Jun, 2017

1 commit

07 Jun, 2017

1 commit

11 May, 2017

2 commits