09 Aug, 2019
3 commits
-
Update the configs tp enable the PCIE iMX DM driver on imx8qxp
MEK board.Signed-off-by: Ye Li
-
When CI_UDC DM driver is enabled in SPL, it must enable EHCI host. Then when
building SPL DM USB host, the usb_hub.c requires to enable SPL ENV.
The imx8qxp fspi config save ENV in MMC due to fspi can't write when running with M4.
But MMC driver is not enabled in fspi SPL, so the build was broken.
Fix the issue by adding CONFIG_SPL_ENV_IS_NOWHERE to all defconfig with SPL ENV
is enabled.Signed-off-by: Ye Li
-
Enable the configs of usb2 so that both usb2 and usb3 gadget
drivers are now supported on imx8 plaform. And add
CONFIG_USB_PORT_AUTO to support usb port autodetect function
for SDP/fastboot.Signed-off-by: Sherry Sun
28 Jun, 2019
1 commit
-
Add CONFIG_DM_USB_GADGET and CONFIG_SPL_DM_USB_GADGET flag on i.MX8QM
and QXP to support DM USB gadget driver.Signed-off-by: Sherry Sun
24 May, 2019
6 commits
-
As the M4 use different DDR memory size in normal android/car2 and car
image, use different defconfig for car2 to decrease DDR memory
reservation. So memory reserved for each M4 core is 8MB in car2 and
normal android image. it's 32MB for car image.Change-Id: Idf608f539cd614a154c78e3a1af28eff1da5c1f2
Signed-off-by: Zhang Bo
Signed-off-by: Ye Li -
Enable the SPL SDP driver and FASTBOOT driver in iMX8QXP MEK board
defconfigs to support running UUUSigned-off-by: Ye Li
-
Update the defconfig files for imx8qxp MEK to enable i2c and
i2c mux virtual drivers.Signed-off-by: Ye Li
Acked-by: Peng Fan
(cherry picked from commit f2d75f7925108d4cc89c8cd4f1d9f735803c8ad1) -
1. Remove FIT support and enable TINY printf for saving SPL size.
2. Fix wrong SPL regulator driver enabled, show use fixed regulator not
gpio.
3. Add flexspi defconfig which uses SPI relevant SPL configs and disable
MMC, GPIO and regulator SPL drivers.
4. Enable the panic. Since we use PSCI to reset, but ATF is not boot when
SPL is running.
5. Use full malloc not simple malloc which has dedicated malloc pool
to support large pool size. The simple malloc size is also used by
early malloc which occupies the stack space. This causes we can't
have a large malloc poolSigned-off-by: Ye Li
-
with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.
Signed-off-by: Peng Fan
Signed-off-by: Ye Li -
Enable PCIE, ENET no-DM support, video, USB OTG and CDNS USB3,
M4 bootaux, fuse, memtest, thermal.Signed-off-by: Ye Li
08 Feb, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
29 Jan, 2019
1 commit
-
Enable SPL for i.MX8QXP MEK, and currently use SPL FIT.
The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.Note: SPL FIT could not support secure boot chain, because i.MX8/8X
only support i.MX container format. This container format has
not been upstreamed, so we use FIT for now. When SPL container
supported, we could switch to that.Signed-off-by: Peng Fan
15 Nov, 2018
1 commit
-
This reverts commit c5bbfaf05dc8592b479a44df6abaadbab54fec2b.
Disabling CONFIG_DISPLAY_CPUINFO was a temporary solution to get
the v2018.11 release out. Now the merge window opens, revert it.Signed-off-by: Bin Meng
Reviewed-by: Simon Glass
14 Nov, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
08 Nov, 2018
1 commit
-
Due to revert of commit c0434407b595, this board does not build
any more. Disable CONFIG_DISPLAY_CPUINFO for v2018.11 release.This commit should be reverted after v2018.11 release.
Signed-off-by: Bin Meng
Acked-by: Peng Fan
Reviewed-by: Simon Glass
22 Oct, 2018
2 commits
-
Update README
Add imximage.cfg
Update defconfig to include imximage.cfgSigned-off-by: Peng Fan
-
Add i.MX8QXP MEK board support
Enabled pinctrl/clk/power-domain/mmc/i2c/fec driver.
Added README file.Signed-off-by: Peng Fan
Reviewed-by: Anatolij Gustschin
Cc: Stefano Babic
Cc: Fabio Estevam