Eric Lee / smarc-uboot

07 Feb, 2019

1 commit

  • 6d8251783   configs: Don't use SPI_FLASH_BAR as default ... Browse Code »
    12

    Now that new SPI NOR layer uses stateless 4 byte opcodes by default,
    don't enable SPI_FLASH_BAR. For SPI controllers that cannot support
    4-byte addressing, (stm32_qspi.c, fsl_qspi.c, mtk_qspi.c, ich.c,
    renesas_rpc_spi.c) add an imply clause to enable SPI_FLASH_BAR so as to
    not break functionality.

    Signed-off-by: Vignesh R
    Tested-by: Simon Goldschmidt
    Tested-by: Stefan Roese
    Tested-by: Horatiu Vultur
    Reviewed-by: Jagan Teki
    Tested-by: Jagan Teki #zynq-microzed

    Vignesh R
     

04 Sep, 2018

1 commit

18 Aug, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

23 Jul, 2018

1 commit

04 Jun, 2018

1 commit

28 Apr, 2018

2 commits

  • 37dc72f5a   configs: Resync with savedefconfig ... Browse Code »

    Rsync all defconfig files using moveconfig.py

    Signed-off-by: Tom Rini

    Tom Rini
     
  • f1b1f7706   Convert CONFIG_SPI to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SPI

    This partly involves updating code that assumes that CONFIG_SPI implies
    things that are specific to the MPC8xx SPI driver. For now, just update
    the CONFIG tests. This also involves reworking the default for
    CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
    reasonable default, as it does not cause any compile failures.

    Signed-off-by: Adam Ford
    Signed-off-by: Tom Rini

    Adam Ford
     

17 Apr, 2018

3 commits

12 Apr, 2018

1 commit

09 Apr, 2018

1 commit

08 Apr, 2018

1 commit

26 Feb, 2018

1 commit

  • 39bcbb774   bootcount: Migrate CONFIG_SYS_BOOTCOUNT_ADDR ... Browse Code »

    Migrate the users of CONFIG_SYS_BOOTCOUNT_ADDR to Kconfig. We can
    provide a default for BOOTCOUNT_AM33XX as that's a specific part of the
    RTC in use. We can also provide a default for ARCH_LS1043A and
    ARCH_LS1021A as they had been previously calculated and their symbols
    are in Kconfig. In the case of other QE-enabled platforms, they are not
    so we must update the relevant defconfig files. The previous default
    only applied in some cases, even on a specific SoC family.

    Reviewed-by: Lukasz Majewski
    Reviewed-by: Alex Kiernan
    Signed-off-by: Tom Rini

    Tom Rini
     

23 Feb, 2018

1 commit

15 Feb, 2018

1 commit

11 Feb, 2018

2 commits

25 Jan, 2018

1 commit

  • 1c7fa7931   arm: socfpga: allow configs without network support ... Browse Code »

    Currently, socfpga_common.h does not allow configurations without
    network support. This is because CONFIG_CMD_PXE is defined in this
    file and distro mode has DHCP hard-coded as available.

    Fix this by moving CONFIG_CMD_PXE and CONFIG_MENU to the defconfigs
    and by making DHCP optional in BOOT_TARGET_DEVICES(func).

    Signed-off-by: Simon Goldschmidt

    Simon Goldschmidt
     

09 Jan, 2018

1 commit

06 Nov, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

28 Aug, 2017

1 commit

15 Aug, 2017

2 commits

08 Aug, 2017

1 commit

26 Jul, 2017

2 commits

14 Mar, 2017

1 commit

30 Dec, 2016

1 commit

  • c27269953   mmc: complete unfinished move of CONFIG_MMC ... Browse Code »
    26

    Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
    a Kconfig entry for this option without any actual moves, then
    commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved
    instances only for SUNXI.

    We generally do not like such partial moves. This kind of work
    is automated by tools/moveconfig.py, so it is pretty easy to
    complete this move.

    I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
    This shortens the configs and will ease new board porting.

    This commit was created as follows:

    [1] Edit Kconfig (remove the "depends on", add the "default",
    copy the prompt and help message from Linux)

    [2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     

24 Oct, 2016

3 commits

12 Oct, 2016

1 commit

27 Sep, 2016

1 commit

20 Sep, 2016

1 commit

  • 9b1b6d422   Revert "Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL" ... Browse Code »

    This reverts commit 90c08d9e08c7a108ab904f3bbdeb558081757892.

    I took a closer look at this after the commit was applied, and found
    CONFIG_SYS_MALLOC_F_LEN=0x2000 was too much. 8KB memory for SPL is
    actually too big for some boards. Perhaps 0x800 is enough, but the
    situation varies board by board.

    Let's postpone our decision until we come up with a better idea.

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Simon Glass

    Masahiro Yamada
     

17 Sep, 2016

1 commit

10 Sep, 2016

1 commit

09 Sep, 2016

1 commit