02 Oct, 2016
4 commits
-
rockchip platform have a protocol to pass the the kernel reboot mode to bootloader
by some special registers when system reboot. In bootloader we should read it and take action.We can only setup boot_mode in board_late_init becasue "setenv" need env setuped.
So add CONFIG_BOARD_LATE_INIT to common header and use a entry "rk_board_late_init"
to replace "board_late_init" in board file.Signed-off-by: Jacob Chen
Acked-by: Simon Glass -
To keep it same with 3288
Signed-off-by: Jacob Chen
Acked-by: Simon Glass -
The latest rk3288-miniarm board doesn't have eMMC device, so remove it.
Signed-off-by: Ziyuan Xu
Acked-by: Simon Glass -
Add vdd_center pwm regulator get_device to
enable this regulator.Signed-off-by: Kever Yang
Acked-by: Simon Glass
22 Sep, 2016
2 commits
-
rk3399 using one gpio control signal for two usb 2.0 host port,
it's better to enable the power in board file instead of in usb driver.Signed-off-by: Kever Yang
Acked-by: Simon Glass -
There is no interrupt line for each PWM which used by pinctrl to get the
periph_id, so it's not able to enable the default pinctrl setting by pinctrl
framework, let's enable it at board_init().Signed-off-by: Kever Yang
Acked-by: Simon Glass
27 Aug, 2016
1 commit
-
This patch add maintainer information for rk3399 evb.
Signed-off-by: Kever Yang
Acked-by: Simon Glass
Reviewed-by: Andreas Färber
06 Aug, 2016
2 commits
-
Miniarm is a rockchip rk3288 based development board, which has lots of
interface such as HDMI, USB, micro-SD card, Audio etc.Signed-off-by: Ziyuan Xu
Acked-by: Simon Glass -
Enable fastboot feature on rk3036, please refer to doc/README.rockchip
for more detailed usage.Signed-off-by: Ziyuan Xu
Reviewed-by: Simon Glass
31 Jul, 2016
4 commits
-
Fennec is a RK3288-based development board with 2 USB ports, HDMI,
micro-SD card, audio and WiFi and Gigabit Ethernet. It also includes
on-board 8GB eMMC and 2GB of SDRAM. Expansion connectors provides access
to display pins, I2C, SPI, UART and GPIOs.Signed-off-by: Ziyuan Xu
Acked-by: Simon Glass -
The 'evb-rk3288' is not a vendor name, change it to 'rockchip' which is
the real vendor name.Signed-off-by: Ziyuan Xu
Acked-by: Simon Glass -
RK3399 needs reserve 0x200000 at the beginning of DRAM, for ATF bl31.
Signed-off-by: Kever Yang
Acked-by: Simon Glass -
Update MAINTAINER files for kylin_rk3036, evb_rk3036.
Signed-off-by: Ziyuan Xu
Acked-by: Simon Glass
26 Jul, 2016
3 commits
-
Add a README to guide people flash the ATF and U-Boot
with Rockchip tools to bring up to board.Signed-off-by: Kever Yang
Acked-by: Simon Glass -
RK3399 is a SoC from Rockchip with dual-core Cortex-A72
and quad-core Cortex-A53 CPU. It supports two USB3.0
type-C ports and two USB2.0 EHCI ports. Other interfaces
are very much like RK3288, the DRAM are 32bit width address
and support address from 0 to 4GB-128MB range.Signed-off-by: Kever Yang
Acked-by: Simon Glass -
The 'evb_rk3036' and 'kylin' is not a vendor name, let's replace them
to 'rockchip' which is a real _vendor_ name, and meet the architecure
'board///'.More boards from rockchip like evb_rk3288, evb_rk3399 will comes later.
Signed-off-by: Kever Yang
Reviewed-by: Eddie Cai