02 Sep, 2020
1 commit
-
Enable CONFIG_NVME and CONFIG_CMD_NVME for Layerscape
platformsSigned-off-by: Wasim Khan
27 Aug, 2020
2 commits
-
Enable CONFIG_BOARD_EARLY_INIT_R for SDHC adapter card
identification and configuration.Signed-off-by: Yangbo Lu
Reviewed-by: Priyanka Jain -
Enable dspi in lx2160aqds tfa defconfig
Enable CONFIG_SPI_FLASH_SST/EON in config file.Signed-off-by: Zhao Qiang
16 Jul, 2020
1 commit
-
Enable support to compile SBSA driver.
Signed-off-by: Zhao Qiang
01 May, 2020
1 commit
-
Add support for Inphi retimers used on LX2160A-RDB/QDS boards
Add support for M13,M8 mezzanine cards using Inphi retimers
Gen1 configurations: 10/25
Gen2 configurations: 10/25 + 40/50/100G (using 2 retimers)
Speeds are configurable via menuconfig optionsSigned-off-by: Florin Chiculita
Rebased
Signed-off-by: Priyanka Jain
30 Mar, 2020
3 commits
-
CONFIG_ENV_ADDR helps in picking environment from flash before DDR init.
Define the value as 0x20500000 for lx2160ardb and lx2160aqds.Signed-off-by: Kuldeep Singh
Reviewed-by: Priyanka Jain -
Enable FSPI controller support. So, flash environment can now be used.
Signed-off-by: Kuldeep Singh
Reviewed-by: Priyanka Jain -
Enable GIC_V3_ITS config to program GIC LPI
configuration table.Signed-off-by: Wasim Khan
Reviewed-by: Priyanka Jain
07 Feb, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
24 Jan, 2020
2 commits
-
Currently LX2 board code uses arch_misc_init to set up the board mux on
RDB and QDS. Move this code to misc_init_r. This is consistent with LS
gen 2 and T series SoCs/boards.Signed-off-by: Alex Marginean
Reviewed-by: Priyanka Jain -
Add Common device tree fixup for NXP SoCs. Based on
SoC and revision call pcie_layerscape or pcie_layerscape_gen4
fixup.Signed-off-by: Wasim Khan
Reviewed-by: Priyanka Jain
23 Jan, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
26 Dec, 2019
1 commit
-
Enable 4-byte Fast Read command for Flexspi AHB mode
Signed-off-by: Kuldeep Singh
Signed-off-by: Priyanka Jain
05 Dec, 2019
2 commits
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
-
MTD must be enabled when there is a SPI NOR flash using the
SPI_FLASH_MTD config entry.Signed-off-by: Miquel Raynal
Reviewed-by: Boris Brezillon
29 Nov, 2019
1 commit
-
Define CONFIG_ENV_SECT_SIZE as 0x20000 in lx2160a related defconfigs:
lx2160ardb_tfa_defconfig, lx2160ardb_tfa_SECURE_BOOT_defconfig,
lx2160aqds_tfa_defconfig, lx2160aqds_tfa_SECURE_BOOT_defconfigSigned-off-by: Priyanka Jain
21 Nov, 2019
1 commit
-
- In ARMv8 NXP Layerscape platforms we also need to make use of
CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
ENV_IS_IN_FLASH.
- Migrate all platforms.Cc: Wolfgang Denk
Cc: Joe Hershberger
Cc: Patrick Delaunay
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini
Acked-by: Joe Hershberger
Reviewed-by: Simon Goldschmidt
08 Nov, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
23 Sep, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
12 Sep, 2019
1 commit
-
lx2160a rev1 and rev2 SoC has different pcie controller.
The pcie controller device tree node fields "compatible"
and registers names needs to be updated accordinglyThis change in device tree is handled as part of
fdt fixups. These changes would only be applied
if the soc revision is not rev1.Signed-off-by: Pankaj Bansal
Signed-off-by: Priyanka Jain
26 Aug, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
22 Aug, 2019
1 commit
-
Enable related configs on all lx2160ardb boards to support pcf2127
rtc DM feature.Also remove SYS_I2C_MXC_I2Cx, where x is from 1 to 8 from
Kconfig.Signed-off-by: Chuanhua Han
Signed-off-by: Biwen Li
Reviewed-by: Prabhakar Kushwaha
14 Aug, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
22 May, 2019
1 commit
-
Enable the PCIe Gen4 controller driver and e1000 for LX2160ARDB
and LX2160AQDS boards.Signed-off-by: Hou Zhiqiang
Reviewed-by: Prabhakar Kushwaha
30 Apr, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
19 Feb, 2019
1 commit
-
LX2160AQDS is a development board that supports LX2160A
family SoCs. This patch add base support for this board.Signed-off-by: Wasim Khan
Signed-off-by: Sriram Dash
Signed-off-by: Pankaj Bansal
Signed-off-by: Udit Agarwal
[PK: Sqaush patch for "secure boot defconfig" & add maintainer]
Signed-off-by: Prabhakar Kushwaha