Eric Lee / smarc-uboot

29 Feb, 2020

1 commit

23 Jan, 2020

1 commit

05 Dec, 2019

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

13 Nov, 2019

1 commit

26 Aug, 2019

1 commit

02 Aug, 2019

1 commit

09 Jul, 2019

1 commit

  • a9221f3eb   at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs ... Browse Code »
    12

    Enable the extended ENV options for AT91 and OMAP2PLUS in order to be
    able to use CONFIG_ENV_UBI_* on these architectures.

    As this change also makes the configs ENV_SIZE, ENV_SECT_SIZE,
    ENV_OFFSET visible to AT91 and OMAP2PLUS, migrate users of these to
    KConfig.

    This migration was run using an extended moveconfig.py which evaluates
    expressions such as "(512 << 10)". See patch ("moveconfig: expand
    simple expressions").

    All modified boards were built with SOURCE_DATE_EPOCH=0 before and
    after the change and successfully confirmed that the identical binary
    is generated (the only exception was igep00x0, which does not define
    CONFIG_ENV_IS_IN_UBI in the original board header. Once that is
    defined, the test passes too).

    hs: rebased patch to:
    68b90e57bc: "configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT"

    Signed-off-by: Markus Klotzbuecher
    Cc: Heiko Schocher
    Cc: Eugen Hristev
    Cc: Tom Rini

    Markus Klotzbuecher
     

01 Feb, 2019

3 commits

08 Jan, 2019

1 commit

14 Nov, 2018

1 commit

18 Aug, 2018

1 commit

04 Jun, 2018

1 commit

28 Apr, 2018

1 commit

  • f1b1f7706   Convert CONFIG_SPI to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SPI

    This partly involves updating code that assumes that CONFIG_SPI implies
    things that are specific to the MPC8xx SPI driver. For now, just update
    the CONFIG tests. This also involves reworking the default for
    CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
    reasonable default, as it does not cause any compile failures.

    Signed-off-by: Adam Ford
    Signed-off-by: Tom Rini

    Adam Ford
     

17 Apr, 2018

2 commits

  • 34b3722e3   configs: Resync with savedefconfig ... Browse Code »

    Rsync all defconfig files using moveconfig.py

    Signed-off-by: Tom Rini

    Tom Rini
     
  • 4f67b93fb   part: Disable CONFIG_SPL_ISO_PARTITION by default ... Browse Code »

    We enabled CONFIG_ISO_PARTITION by default for distro boot, so that U-Boot
    could load distro images that usually get shipped as iso images. These images
    usually come with a board agnostic boot environment.

    However, there is very little point in having ISO support enabled (for anyone
    really) in SPL, as the whole idea of SPL is to load U-Boot proper which again
    is board specific. So the fact that we enable ISO support in U-Boot proper does
    not mean at all that we want ISO support in U-Boot SPL.

    Hence, let's remove the Kconfig dependency. Along the way, let's also clean up
    all those default configs that disabled SPL ISO support.

    Signed-off-by: Alexander Graf

    Alexander Graf
     

14 Apr, 2018

1 commit

09 Apr, 2018

2 commits

08 Apr, 2018

1 commit

07 Apr, 2018

1 commit

23 Feb, 2018

1 commit

21 Oct, 2017

1 commit

  • 0a9ef4515   Convert CONFIG_NAND_OMAP_GPMC et al and CONFIG_NAND_MXC to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_NAND_MXC
    CONFIG_NAND_OMAP_GPMC
    CONFIG_NAND_OMAP_GPMC_PREFETCH
    CONFIG_NAND_OMAP_ELM
    CONFIG_SPL_NAND_AM33XX_BCH
    CONFIG_SPL_NAND_SIMPLE
    CONFIG_SYS_NAND_BUSWIDTH_16BIT

    Signed-off-by: Adam Ford
    Reviewed-by: Heiko Schocher
    [trini: Finish migration of CONFIG_SPL_NAND_SIMPLE, fix some build issues,
    add CONFIG_NAND_MXC so we can do CONFIG_SYS_NAND_BUSWIDTH_16BIT]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

30 Sep, 2017

1 commit

28 Aug, 2017

1 commit

15 Aug, 2017

1 commit

14 Aug, 2017

1 commit

08 Aug, 2017

1 commit

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

25 Jul, 2017

1 commit

19 Jun, 2017

1 commit

04 Jun, 2017

1 commit

  • 91d27a17c   Kconfig: Migrate FS_FAT / FAT_WRITE ... Browse Code »

    Now that these symbols are in Kconfig, migrate all users. Use imply on
    a number of platforms that default to having this enabled. As part of
    this we must migrate some straglers for CMD_FAT and DOS_PARTITION.

    Signed-off-by: Tom Rini

    Tom Rini
     

28 Apr, 2017

2 commits

14 Mar, 2017

1 commit

28 Jan, 2017

1 commit