09 Mar, 2020
1 commit
-
With CONFIG_SUPPORT_EMMC_BOOT moved to Kconfig, move it to defconfig
files.Signed-off-by: Faiz Abbas
Signed-off-by: Lokesh Vutla
29 Feb, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
23 Jan, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
20 Jan, 2020
3 commits
-
Enable USB keyboard to be used as input device at U-Boot prompt. Both
serial and USB keyboard will be active inputs simultaneously.Signed-off-by: Vignesh Raghavendra
Signed-off-by: Lokesh Vutla -
Enable configs related to USB Host mode, Peripheral mode and DFU.
Signed-off-by: Vignesh Raghavendra
Signed-off-by: Lokesh Vutla -
Add Support for ADMA in a53 and r5 defconfigs.
Signed-off-by: Faiz Abbas
Signed-off-by: Lokesh Vutla
05 Dec, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
21 Nov, 2019
2 commits
-
- In ARMv8 NXP Layerscape platforms we also need to make use of
CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
ENV_IS_IN_FLASH.
- Migrate all platforms.Cc: Wolfgang Denk
Cc: Joe Hershberger
Cc: Patrick Delaunay
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini
Acked-by: Joe Hershberger
Reviewed-by: Simon Goldschmidt -
Today in initr_reloc_global_data() we use some non-obvious tests to
determine if we need to relocate the env_addr within gd or not. In
order to facilitate migration of other symbols to Kconfig we need to
introduce a new symbol for this particular use case.Cc: Wolfgang Denk
Cc: Joe Hershberger
Signed-off-by: Tom Rini
13 Nov, 2019
1 commit
-
Move this symbol to Kconfig. As part of this we can drop a UBI-specific
symbol that was a stop-gap for not having this particular symbol in
Kconfig.Signed-off-by: Tom Rini
12 Nov, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
12 Oct, 2019
2 commits
-
Enable CONFIG_DISPLAY_CPUINFO so that cpuinfo is printed during boot.
Signed-off-by: Lokesh Vutla
-
AM65x uses TISCI protocol to reset the device and does not
support PSCI reset. So disable PSCI reset.Signed-off-by: Lokesh Vutla
11 Oct, 2019
2 commits
-
The A53 U-boot can support early booting of the MCU R5F remote processor(s)
from U-boot prompt to achieve various system usecases before booting the
Linux kernel. Update the default BOOTCOMMAND to provide an automatic and
easier way to start the MCU R5F cores through added environment variables.Signed-off-by: Suman Anna
Signed-off-by: Lokesh Vutla -
Enable the R5F remoteproc driver for the AM65x GP EVM so that the
MCU domain R5F cores can be booted from A53 U-boot.Signed-off-by: Suman Anna
Signed-off-by: Lokesh Vutla
23 Sep, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
14 Aug, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
13 Aug, 2019
2 commits
-
Enable support for Intel E1000 based PCIe ethernet cards that
can be used to test PCIe RC functionality on AM65x EVM.Signed-off-by: Sekhar Nori
-
Enable support for PCIe and related configurations
on AM654 EVM platform.Signed-off-by: Sekhar Nori
01 Aug, 2019
1 commit
-
The K3 System Controller driver is used for loading and starting
the System Firmware, and is used only on R5 SPL. It need not be
enabled and built for the A53 U-Boot and SPL, so disable it from
both the GP and HS AM65x A53 defconfigs.While at this, also remove the unneeded CONFIG_SPL_REMOTEPROC and
CONFIG_CMD_REMOTEPROC as no remoteprocs are now loaded from A53 SPL.Signed-off-by: Suman Anna
Reviewed-by: Lokesh Vutla
27 Jul, 2019
1 commit
-
k3_rproc driver is specifically meant for controlling an arm64
core using TISCI protocol. So rename the driver, Kconfig symbol,
compatible and functions accordingly.While at it drop this remoteproc selection for a53 defconfig.
Signed-off-by: Lokesh Vutla
17 Jul, 2019
9 commits
-
This will allow for downloading and applying overlays from an MMC/SD
boot media based on the overlay_files ENV variable containing a list
of overlay files.Signed-off-by: Andreas Dannenberg
Reviewed-by: Lokesh Vutla -
The malloc pool used before relocation is getting tight leading to
out of memory errors doing certain DM-related calls. Since we are
running the A53 SPL out of DDR let's just go ahead and bump its size
as used in U-Boot proper as well as SPL (via Kconfig default value)
from 8KB to 32KB.Signed-off-by: Andreas Dannenberg
Reviewed-by: Lokesh Vutla -
Enable GPIO driver for PCA953X-compatible I2C-based I/O expander
which includes support for the TCA9554/PCA9554-type expander found
on the AM654 EVM base board.Signed-off-by: Andreas Dannenberg
Reviewed-by: Lokesh Vutla -
Enable I2C via driver model as well as the associated set of U-Boot
commands to allow us interacting with various I2C slave devices.Signed-off-by: Andreas Dannenberg
Signed-off-by: Vignesh R
Reviewed-by: Lokesh Vutla -
Add configs to support RAW boot mode in eMMC.
Signed-off-by: Faiz Abbas
Signed-off-by: Andreas Dannenberg -
Add Support for creating GPT partitions in U-boot.
Signed-off-by: Faiz Abbas
-
Add configs such that U-boot environment is in eMMC by default.
Signed-off-by: Faiz Abbas
-
Add Support for CONFIG_REGMAP.
Signed-off-by: Faiz Abbas
Reviewed-by: Tom Rini -
Sync the sdhci0 node from kernel. This changes the compatible that is
required to be there in the driver. Change the same for the SD card node
which is not yet supported in kernel. This also syncs the main_pmx0 node
as a side effect.Also change the name of the driver to match the compatible in kernel.
Signed-off-by: Faiz Abbas
Reviewed-by: Tom Rini
16 Jul, 2019
1 commit
-
Enable TI K3 AM65x CPSW NUSS driver.
Signed-off-by: Grygorii Strashko
Signed-off-by: Keerthy
Reviewed-by: Tom Rini
Acked-by: Joe Hershberger
Reviewed-by: Lokesh Vutla
08 May, 2019
1 commit
-
SPL/TPL also need use sysreset for some feature like panic callback.
Signed-off-by: Kever Yang
30 Apr, 2019
2 commits
-
Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing
values.Signed-off-by: Simon Goldschmidt
[trini: Re-run migration]
Signed-off-by: Tom Rini -
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
12 Apr, 2019
2 commits
-
Enable CONFIG_OF_BOARD_SETUP so that msmc sram dt nodes
are updated correctly.Signed-off-by: Lokesh Vutla
-
Enable TI K3 AM65x PSI-L, Ring Accelerator and UDMA drivers
Signed-off-by: Grygorii Strashko
Signed-off-by: Vignesh R
Reviewed-by: Tom Rini
01 Feb, 2019
1 commit
-
Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT so
obj-$(CONFIG_$(SPL_)FS_FAT) can be used to control the build in both
SPL and U-Boot.Signed-off-by: Tien Fong Chee
Reviewed-by: Simon Goldschmidt
Reviewed-by: Tom Rini
11 Sep, 2018
1 commit
-
Add initial defconfig support for AM65x that runs on A53.
Reviewed-by: Tom Rini
Signed-off-by: Lokesh Vutla