11 May, 2020
1 commit
-
Update board codes and DTS files to add display relevant nodes and
configurations.
Support two video links with MIPI DSI:
1. MIPI DSI to HDMI convertor, this is default
2. RM67191 panelSigned-off-by: Ye Li
(cherry picked from commit 6901ffb66e516a3e52d2120522dc1be18de5bafa)
06 May, 2020
1 commit
-
enable CONFIG_OF_LIBFDT_OVERLAY. It can be used by u-boot
to apply a dto built by OP-TEE.Signed-off-by: Silvano di Ninno
Reviewed-by: Ye Li
27 Apr, 2020
5 commits
-
Current codes assume the OPTEE address is at the end of first DRAM bank.
Adjust the process to allow OPTEE in the middle of first bank.When OPTEE memory is removed from first bank, it may split the first bank
to two banks, so increase the CONFIG_NR_DRAM_BANKS and adjust the MMU
table for the split case.Signed-off-by: Ye Li
Signed-off-by: Silvano di Ninno
Tested-by: Silvano di Ninno
(cherry picked from commit e2a3b770ef847354ebe85c363608f27381d48adc) -
Both imx8mn/imx8mm EVK boards have eMMC 5.1 chip and support SD3.0
So we enable the HS400ES and UHS configs to enhance eMMC/SD accessSigned-off-by: Ye Li
Reviewed-by: Peng Fan
(cherry picked from commit cf83fe7dcfcb14dd633ad43ef387793a863e111a) -
To align with other iMX8M platforms, use CONFIG_TARGET_IMX8MN_DDR4_EVK for
DDR4 EVK board and will use CONFIG_TARGET_IMX8MN_EVK for LPDDR4 EVK.Signed-off-by: Ye Li
(cherry picked from commit 2fa2f90417df4c68beb78e40c77725ca3caba08e)
(cherry picked from commit 2e06698f0cfd0d06dce80f99b742d5b236e80d02) -
Enable multiple environment storage devices on iMX8MN DDR4 EVK board.
Remove duplicated CONFIG_ENV_OFFSET since we use env_get_offset to
override it.Signed-off-by: Ye Li
(cherry picked from commit 5c93b1e7f58a0280f7dda71865361c62d3ba6270)
(cherry picked from commit d34d36d32acb5aa1d91e349acd7fc8aee3f096fe) -
Update below codes for DDR4 EVK:
1. Change SPL to non-DM
2. Add DM FEC ENET support
3. Enable Flexspi NOR support
4. Add USB typec host and device mode supportSigned-off-by: Ye Li
23 Apr, 2020
1 commit
-
Print out atf commit in U-Boot.
Signed-off-by: Peng Fan
(cherry picked from commit df89948806c38e38119767a67ef0e18f24ac886b)
(cherry picked from commit 3a17aa1659fbfe675b74ada60a481d93bb557cdc)
(cherry picked from commit 60780b360889a4366159d342dd7e197faf0d1ca2)
23 Jan, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
08 Jan, 2020
1 commit
-
enable CONFIG_CMD_ERASEENV to make it easy to erase env.
Use savedefconfig to generate new defconfig.Reviewed-by: Fabio Estevam
Signed-off-by: Peng Fan
21 Nov, 2019
2 commits
-
- In ARMv8 NXP Layerscape platforms we also need to make use of
CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
ENV_IS_IN_FLASH.
- Migrate all platforms.Cc: Wolfgang Denk
Cc: Joe Hershberger
Cc: Patrick Delaunay
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini
Acked-by: Joe Hershberger
Reviewed-by: Simon Goldschmidt -
Today in initr_reloc_global_data() we use some non-obvious tests to
determine if we need to relocate the env_addr within gd or not. In
order to facilitate migration of other symbols to Kconfig we need to
introduce a new symbol for this particular use case.Cc: Wolfgang Denk
Cc: Joe Hershberger
Signed-off-by: Tom Rini
05 Nov, 2019
1 commit
-
Support pinctrl/clk/sdhc, include ddr4 timing data.
Log:
U-Boot SPL 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800)
Normal Boot
Trying to boot from BOOTROM
image offset 0x8000, pagesize 0x200, ivt offset 0x0U-Boot 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800)
CPU: Freescale i.MX8MNano rev1.0 at 24 MHz
Reset cause: POR
Model: NXP i.MX8MNano DDR4 EVK board
DRAM: 2 GiB
MMC: FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environmentIn: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0Signed-off-by: Peng Fan