29 Feb, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
23 Jan, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
20 Jan, 2020
1 commit
-
Enable SPL SDP fallback boot option in default build.
Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Silvio Fricke
Cc: Stefano Babic
09 Dec, 2019
1 commit
-
Fixes for 2020.01
------------------ imx8qxp_mek: increase buffer sizes and args number
- Fixes for imx7ulp
- imx8mm: Fix the first root clock in imx8mm_ahb_sels[]
- colibri_imx7: reserve DDR memory for Cortex-M4
- vining2000: fixes and convert to ethernet DM
- imx8m: fix rom version check to unbreak some B0 chips
- tbs2910: Disable VxWorks image booting support
06 Dec, 2019
4 commits
-
The fitImage support was enabled in the downstream U-Boot port and the
kernel images on the device are fitImage, yet this functionality is not
enabled in mainline U-Boot. Enable it.Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Silvio Fricke
Cc: Stefano Babic -
Convert the board to ethernet DM support. Adjust board file accordingly,
as the board_eth_init() contains custom clock configuration required for
this board to work. Furthermore, enable FEC1 clock to make FEC1 work as
well.Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Silvio Fricke
Cc: Stefano Babic -
Enable DRAM calibration in SPL to improve behavior of the board
in edge conditions of the thermal envelope of the board and make
it even more stable.Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Silvio Fricke
Cc: Stefano Babic -
In preparation for use of DDR DRAM fine-tuning upon boot,
convert the board to SPL framework instead of using DCD
tables to bring up DRAM and pinmux.Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Silvio Fricke
Cc: Stefano Babic
05 Dec, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
21 Nov, 2019
2 commits
-
- In ARMv8 NXP Layerscape platforms we also need to make use of
CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
ENV_IS_IN_FLASH.
- Migrate all platforms.Cc: Wolfgang Denk
Cc: Joe Hershberger
Cc: Patrick Delaunay
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini
Acked-by: Joe Hershberger
Reviewed-by: Simon Goldschmidt -
Today in initr_reloc_global_data() we use some non-obvious tests to
determine if we need to relocate the env_addr within gd or not. In
order to facilitate migration of other symbols to Kconfig we need to
introduce a new symbol for this particular use case.Cc: Wolfgang Denk
Cc: Joe Hershberger
Signed-off-by: Tom Rini
13 Nov, 2019
1 commit
-
Move this symbol to Kconfig. As part of this we can drop a UBI-specific
symbol that was a stop-gap for not having this particular symbol in
Kconfig.Signed-off-by: Tom Rini
26 Aug, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
24 Aug, 2019
1 commit
-
This converts the following to Kconfig:
CONFIG_FSL_USDHCSigned-off-by: Adam Ford
[trini: Add IMX8M, TARGET_S32V234EVB to FSL_USDHC list]
Signed-off-by: Tom Rini
14 Aug, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
20 Jul, 2019
1 commit
-
add Kconfig support for this driver.
Signed-off-by: Heiko Schocher
Acked-by: Martyn Welch
23 Jun, 2019
1 commit
-
Converted to use fsl_esdhc_imx for i.MX platforms.
Signed-off-by: Yangbo Lu
Tested-by: Steffen Dirkwinkel
Reviewed-by: Peng Fan
Reviewed-by: Lukasz Majewski
Reviewed-by: Martyn Welch
Acked-by: Jason Liu
11 Jun, 2019
8 commits
-
Enable DM Serial support on iMX6SX VINING|2000.
Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Silvio Fricke
Cc: Stefano Babic -
Enable DM PCI support on iMX6SX VINING|2000.
Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Silvio Fricke
Cc: Stefano Babic -
Enable DM GPIO support on iMX6SX VINING|2000 and fix up
board code where applicable.Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Silvio Fricke
Cc: Stefano Babic -
Enable DM USB support on iMX6SX VINING|2000.
Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Silvio Fricke
Cc: Stefano Babic -
Enable DM block and DM MMC support on iMX6SX VINING|2000 .
Convert board code to match the DM support. This disables
USB mass storage support due to missing DM USB, however
that will be re-enabled in subsequent patch.Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Silvio Fricke
Cc: Stefano Babic -
Enable DM pin control support on iMX6SX VINING|2000.
Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Silvio Fricke
Cc: Stefano Babic -
Import iMX6SX VINING|2000 device tree from Linux 5.1.1 b724e9356404 .
Enable DT control in full U-Boot .Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Silvio Fricke
Cc: Stefano Babic -
The company Samtec was merged into Softing, migrate the board over to
the new name and update copyright headers.Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Silvio Fricke
Cc: Stefano Babic
05 May, 2019
1 commit
-
This converts the following to Kconfig:
CONFIG_SUPPORT_EMMC_BOOTAs requested by Michal Simek , these boards
have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated:xilinx_zynqmp_zc1275_revB
xilinx_zynqmp_zc1751_xm018_dc4
xilinx_zynqmp_zc1751_xm019_dc5
xilinx_zynqmp_zcu100_revC
xilinx_zynqmp_zcu102_rev1_0
xilinx_zynqmp_zcu102_revA
xilinx_zynqmp_zcu102_revB
xilinx_zynqmp_zcu104_revA
xilinx_zynqmp_zcu104_revC
xilinx_zynqmp_zcu106_revA
xilinx_zynqmp_zcu111_revASigned-off-by: Alex Kiernan
Acked-by: Lukasz Majewski
Acked-by: Patrick Delaunay
Acked-by: Ramon Fried
Reviewed-by: Andy Shevchenko
Tested-by: Sébastien Szymanski
30 Apr, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
19 Jan, 2019
1 commit
-
The bounce buffer is used by a few drivers (most of the MMC drivers)
to overcome limitations in their respective DMA implementation.This moves the configuration to Kconfig and makes it user-selectable
(even though it will be a required feature to make those drivers
work): the expected usage is for drivers depending on this to 'select'
it unconditionally from their respective Kconfig (see follow-up
patches).This commit includes a full migration using moveconfig.py to ensure
that each commit compiles. To ensure bisectability we update
dependencies of various drivers to now select BOUNCE_BUFFER when needed.[trini: Squash all patches to ensure bisectability]
Signed-off-by: Tom Rini
Signed-off-by: Philipp Tomsich
Reviewed-by: Otavio Salvador [dw_mmc portion]
Reviewed-by: Fabio Estevam [mxsmmc portion]
Reviewed-by: Simon Glass [tegra portion]
18 Aug, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_MII
CONFIG_DRIVER_TI_EMACSigned-off-by: Adam Ford
Acked-by: Jagan Teki
Acked-by: Joe Hershberger
17 Aug, 2018
1 commit
-
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
2), set this to 8.Signed-off-by: Tom Rini
24 May, 2018
1 commit
-
Convert CONFIG_SUPPORT_EMMC_RPMB to Kconfig. Split the command handling
from the underlying support and expose this through CMD_MMC_RPMB.Signed-off-by: Alex Kiernan
09 Apr, 2018
2 commits
-
Convert CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig
Signed-off-by: Alex Kiernan
Reviewed-by: Lukasz Majewski
Reviewed-by: Petr Vorel
Reviewed-by: Petr Vorel -
Migrate the CONFIG_FSL_ESDHC option to Kconfig.
Signed-off-by: Mario Six
24 Feb, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_BOOTP_BOOTPATH
CONFIG_BOOTP_DNS
CONFIG_BOOTP_GATEWAY
CONFIG_BOOTP_HOSTNAME
CONFIG_BOOTP_PXE
CONFIG_BOOTP_SUBNETMASK
CONFIG_CMDLINE_EDITING
CONFIG_AUTO_COMPLETE
CONFIG_SYS_LONGHELP
CONFIG_SUPPORT_RAW_INITRD
CONFIG_ENV_VARS_UBOOT_CONFIGSigned-off-by: Adam Ford
[trini: Re-run the migration]
Signed-off-by: Tom Rini
11 Feb, 2018
1 commit
-
On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
values into the defconfig and removing them from the headers.I did not attempt to add more default values in and for now will leave
that to maintainers.Signed-off-by: Tom Rini
11 Oct, 2017
1 commit
-
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.Signed-off-by: Tuomas Tynkkynen
08 Sep, 2017
2 commits
-
This migrates ASIX, ASIX88179, MCS7830, RTL8152 and SMSC95XX to Kconfig.
Update defconfigs.Signed-off-by: Chris Packham
Reviewed-by: Simon Glass -
CONFIG_USB_HOST_ETHER is the framework that the drivers are dependent on
USB_HOST_ETHER. Use this as a menu and move the existing LAN75XX and
LAN78XX options under new menu. Finally update the defconfigs that need
CONFIG_USB_HOST_ETHER.Signed-off-by: Chris Packham
Reviewed-by: Simon Glass
15 Aug, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
12 Aug, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_PCISigned-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich