24 Jul, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
02 May, 2013
1 commit
-
Devices that used to have a whole disk FAT filesystem but got then
partitioned will most likely still have a FAT or FAT32 signature
in the first sector as this sector does not get overwritten by
a partitioning tool (otherwise the tool would risk to kill the mbr).The current partition search algorithm will erronously detects such
a device as a raw FAT device.Instead of looking for the FAT or FAT32 signatures immediately we
use the same algorithm as used by the Linux kernel and first check
for a valid boot indicator flag on each of the 4 partitions.
If the value of this flag is invalid for the first entry we then
do the raw partition check.
If the flag for any higher partition is wrong we assume the device
is neiter a MBR nor PBR device.Signed-off-by: Egbert Eich
15 Mar, 2013
1 commit
-
This set of ifdefs is used in a number of places. Move its definition
somewhere common so it doesn't have to be repeated.Signed-off-by: Stephen Warren
Acked-by: Simon Glass
Acked-by: Tom Rini
Signed-off-by: Tom Warren
17 Oct, 2012
2 commits
-
This information may be useful to compare against command "part uuid",
or if you want to manually paste the information into the kernel
command-line.Signed-off-by: Stephen Warren
[trini: print_one_part / print_part_dos output strings didn't quite
match before the changes]
Signed-off-by: Tom Rini -
Minor cleanups required so later patches don't trigger checkpatch.
Signed-off-by: Stephen Warren
09 Oct, 2012
1 commit
-
Logically, a disk that contains a raw FAT filesystem does not in fact
have a partition table. However, test_part_dos() was claiming that such
disks did in fact have a DOS-style partition table. This caused
get_device_and_partition() not to return a whole-disk disk_partition_t,
since part_type != PART_TYPE_UNKNOWN.part_dos.c's print_partition_extended() detected the raw FAT filesystem
condition and printed a fake partition table that encompassed the whole
disk.However, part_dos.c's get_partition_info_extended() did not return any
valid partitions in this case. This combination caused
get_device_and_partition() not to find any valid partitions, and hence
to return an error.Fix test_part_dos() not to claim that raw FAT filesystems are DOS
partition tables. In turn, this causes get_device_and_partition() to
return a whole-disk disk_partition_t, and hence the following commands
work:fatls mmc 0 /
fatls mmc 0:auto /An alternative would be to modify print_partition_extended() to detect
raw FAT filesystems, just like print_partition_extended() does, and to
return a fake partition in this case. However, this seems logically
incorrect, and also duplicates code, since get_device_and_partition()
falls back to returning a whole-disk partition when there is no partition
table on the device.Signed-off-by: Stephen Warren
26 Sep, 2012
2 commits
-
The MSDOS/MBR partition table includes a 32-bit unique ID, often referred
to as the NT disk signature. When combined with a partition number within
the table, this can form a unique ID similar in concept to EFI/GPT's
partition UUID.This patch generates UUIDs in the format 0002dd75-01, which matches the
format expected by the Linux kernel.Signed-off-by: Stephen Warren
-
Determine which partitions are bootable/active. In the partition listing,
print "Boot" for partitions with the bootable/active flag set.Signed-off-by: Rob Herring
22 Jun, 2012
1 commit
-
This driver is unused and obsolete.
Signed-off-by: Marek Vasut
Cc: Wolfgang Denk
Cc: unsik Kim
30 Apr, 2012
1 commit
-
Signed-off-by: Eric Nelson
Acked-by: Mike Frysinger
28 Jul, 2011
1 commit
-
Apple iPod nanos have sector sizes of 2 or 4 KiB, which crashes U-Boot when it
tries to read the MBR into 512-byte buffer situated on stack. Instead use the
variable length arrays to be safe with any large sector size.Signed-off-by: Sergei Shtylyov
25 Jul, 2010
1 commit
-
"Superfloppy" format (in U-Boot called PBR) did not work for FAT32 as
the file system type string is at a different location. Add support
for FAT32.Signed-off-by: Wolfgang Denk
19 Oct, 2009
1 commit
-
Only read partitions which have 0x00 or 0x80 set in their status field.
All others are invalid.Signed-off-by: Daniel Mack
10 Aug, 2009
1 commit
-
Remove bogus newline character that got added to the .name field of
the disk_partition_t structure.Signed-off-by: Wolfgang Denk
04 Apr, 2009
1 commit
-
Mflash is fusion memory device mainly targeted consumer eletronic and
mobile phone.
Internally, it have nand flash and other hardware logics and supports
some different operation (ATA, IO, XIP) modes.IO mode is custom mode for the host that doesn't have IDE interface.
(Many mobile targeted SoC doesn't have IDE bus)This driver support mflash IO mode.
Followings are brief descriptions about IO mode.
1. IO mode based on ATA protocol and uses some custom command. (read
confirm, write confirm)
2. IO mode uses SRAM bus interface.Signed-off-by: unsik Kim
18 Feb, 2009
1 commit
-
Move the CONFIG_XXX out of the part_XXX.c file and into Makefile to
avoid pointless compiles.Signed-off-by: Mike Frysinger
27 Mar, 2008
1 commit
-
- add the SATA framework
- add the SATA command lineSigned-off-by: Dave Liu
10 Jul, 2007
1 commit
-
Signed-off-by: Jon Loeliger
04 Jul, 2007
1 commit
-
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)Signed-off-by: Jon Loeliger
13 Oct, 2005
1 commit
25 Feb, 2005
1 commit
24 Feb, 2004
1 commit
-
* Cleanup compiler warnings
* Fix problem with side effects in macros in include/usb.h
* Patch by David Benson, 13 Nov 2003:
bug 841358 - fix TFTP download size limit* Fixing bug 850768:
improper flush_cache() in load_serial()* Fixing bug 834943:
MPC8540 - missing volatile declarations* Patch by Stephen Williams, 09 Feb 2004:
Add support for Xilinx SystemACE chip:
- New files common/cmd_ace.c and include/systemace.h
- Hook systemace support into cmd_fat and the partition manager* Patch by Travis Sawyer, 09 Feb 2004:
Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
11 Sep, 2003
2 commits
-
add FAT support for IDE, SCSI and USB
* Patches by Gleb Natapov, 2 Sep 2003:
- cleanup of POST code for unsupported architectures
- MPC824x locks way0 of data cache for use as initial RAM;
this patch unlocks it after relocation to RAM and invalidates
the locked entries.* Patch by Gleb Natapov, 30 Aug 2003:
new I2C driver for mpc107 bridge. Now works from flash.* Patch by Dave Ellis, 11 Aug 2003:
- JFFS2: fix typo in common/cmd_jffs2.c
- JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
- JFFS2: remove node version 0 warning
- JFFS2: accept JFFS2 PADDING nodes
- SXNI855T: add AM29LV800 support
- SXNI855T: move environment from EEPROM to flash
- SXNI855T: boot from JFFS2 in NOR or NAND flash* Patch by Bill Hargen, 11 Aug 2003:
fixes for I2C on MPC8240
- fix i2c_write routine
- fix iprobe command
- eliminates use of global variables, plus dead code, cleanup. -
(tested with USB memory sticks only)
* Avoid flicker on TRAB's VFD
30 Jun, 2003
1 commit
-
(autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
28 Jun, 2003
1 commit
-
- remove trailing white space, trailing empty lines, C++ comments, etc.
- split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)* Patches by Kenneth Johansson, 25 Jun 2003:
- major rework of command structure
(work done mostly by Michal Cendrowski and Joakim Kristiansen)
20 May, 2003
1 commit
-
update for CrayL1 board
* Patch by Pantelis Antoniou, 21 Apr 2003:
add boot support for ARTOS (a proprietary OS)* Patch by Steven Scholz, 11 Apr 2003:
Add support for RTC DS1338* Patch by Rod Boyce, 24 Jan 2003:
Fix counting of extended partitions in diskboot command
03 Nov, 2002
1 commit