Eric Lee / smarc-uboot

16 Jan, 2019

1 commit

20 Oct, 2018

1 commit

09 Oct, 2018

1 commit

04 Sep, 2018

1 commit

18 Aug, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

28 Aug, 2017

1 commit

16 Aug, 2017

1 commit

  • c1c3fe230   env: Convert CONFIG_ENV_IS_IN... to a choice ... Browse Code »

    At present we support multiple environment drivers but there is not way to
    select between them at run time. Also settings related to the position and
    size of the environment area are global (i.e. apply to all locations).

    Until these limitations are removed we cannot really support more than one
    environment location. Adjust the location to be a choice so that only one
    can be selected. By default the environment is 'nowhere', meaning that the
    environment exists only in memory and cannot be saved.

    Also expand the help for the 'nowhere' option and move it to the top since
    it is the default.

    Signed-off-by: Simon Glass
    [trini: Move all of the imply logic to default X if Y so it works again]
    Signed-off-by: Tom Rini

    Simon Glass
     

15 Aug, 2017

1 commit

12 Aug, 2017

1 commit

23 May, 2017

1 commit

01 May, 2017

1 commit

13 Feb, 2017

1 commit

  • e856bdcfb   flash: complete CONFIG_SYS_NO_FLASH move with renaming ... Browse Code »
    20

    We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
    not completed. Finish this work by the tool.

    During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
    Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
    than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will
    make the code more readable. Besides, negative meaning symbols do
    not fit in obj-$(CONFIG_...) style Makefiles.

    This commit was created as follows:

    [1] Edit "default n" to "default y" in the config entry in
    common/Kconfig.

    [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"

    [3] Rename the instances in defconfigs by the following:
    find . -path './configs/*_defconfig' | xargs sed -i \
    -e '/CONFIG_SYS_NO_FLASH=y/d' \
    -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'

    [4] Change the conditionals by the following:
    find . -name '*.[ch]' | xargs sed -i \
    -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
    -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
    -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
    -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'

    [5] Modify the following manually
    - Rename the rest of instances
    - Remove the description from README
    - Create the new Kconfig entry in drivers/mtd/Kconfig
    - Remove the old Kconfig entry from common/Kconfig
    - Remove the garbage comments from include/configs/*.h

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

28 Jan, 2017

1 commit

26 Jan, 2017

1 commit

28 Oct, 2016

1 commit

20 Jun, 2016

1 commit

  • 41598c825   autoboot: add CONFIG_AUTOBOOT to allow to not compile autoboot.c ... Browse Code »

    Since commit bb597c0eeb7e ("common: bootdelay: move CONFIG_BOOTDELAY
    into a Kconfig option"), CONFIG_BOOTDELAY is defined for all boards.

    Prior to that commit, it was allowed to unset CONFIG_BOOTDELAY to
    not compile common/autoboot.c, as described in common/Makefile:

    # This option is not just y/n - it can have a numeric value
    ifdef CONFIG_BOOTDELAY
    obj-y += autoboot.o
    endif

    It was a bit odd to enable/disable code with an integer type option,
    but it was how this option worked before that commit, and several
    boards actually unset it to opt out of the autoboot feature.

    This commit adds a new bool option, CONFIG_AUTOBOOT, and makes
    CONFIG_BOOTDELAY depend on it.

    I chose "default y" for this option because most boards use the
    autoboot. I added "# CONFIG_AUTOBOOT is not set" for the boards that
    had not set CONFIG_BOOTDELAY prior to the bad commit.

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

10 Jun, 2016

1 commit

26 May, 2016

1 commit

  • 6242aa137   malta: Use device model & tree for UART ... Browse Code »

    Make use of device model & device tree to probe the UART driver. This is
    the initial step in bringing Malta up to date with driver model, and
    allows for cleaner handling of the different I/O addresses for different
    system controllers by specifying the ISA bus address instead of a
    translated memory address.

    Signed-off-by: Paul Burton
    Reviewed-by: Daniel Schwierzeck

    Paul Burton
     

26 Apr, 2016

2 commits

22 Nov, 2015

1 commit

26 Jun, 2015

2 commits

  • ef0f2f575   Move defaults from config_cmd_default.h to Kconfig ... Browse Code »

    This sets the default commands Kconfig to match
    include/config_cmd_default.h commands in the common/Kconfig and removes
    them from include/configs.

    Signed-off-by: Joe Hershberger
    [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
    Signed-off-by: Tom Rini

    Joe Hershberger
     
  • c9bb942e2   Move default y configs out of arch/board Kconfig ... Browse Code »

    Some archs/boards specify their own default by pre-defining the config
    which causes the Kconfig system to mix up the order of the configs in
    the defconfigs... This will cause merge pain if allowed to proliferate.

    Remove the configs that behave this way from the archs.

    A few configs still remain, but that is because they only exist as
    defaults and do not have a proper Kconfig entry. Those appear to be:

    SPIFLASH
    DISPLAY_BOARDINFO

    Signed-off-by: Joe Hershberger
    [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates,
    drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM]
    Signed-off-by: Tom Rini

    Joe Hershberger
     

01 Jun, 2015

1 commit

02 Nov, 2014

1 commit

30 Jul, 2014

1 commit

  • dd84058d2   kconfig: add board Kconfig and defconfig files ... Browse Code »

    This commit adds:
    - arch/${ARCH}/Kconfig
    provide a menu to select target boards
    - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
    - configs/${TARGET_BOARD}_defconfig
    default setting of each board

    (This commit was automatically generated by a conversion script
    based on boards.cfg)

    In Linux Kernel, defconfig files are located under
    arch/${ARCH}/configs/ directory.
    It works in Linux Kernel since ARCH is always given from the
    command line for cross compile.

    But in U-Boot, ARCH is not given from the command line.
    Which means we cannot know ARCH until the board configuration is done.
    That is why all the "*_defconfig" files should be gathered into a
    single directory ./configs/.

    Signed-off-by: Masahiro Yamada
    Acked-by: Simon Glass

    Masahiro Yamada