03 Nov, 2018

1 commit

• f773733d4   MLK-20163-03 board: imx8mq_evk: Refact the imx8mq dram init code ... Browse Code »

  Refact the i.MX8MQ dram init flow to reuse the common dram
  driver used by i.MX8MM.

  Signed-off-by: Bai Ping

  Bai Ping

  2018-11-03 09:50:11 +0800  

28 Aug, 2018

1 commit

• 26aab18d0   MLK-18901-2 imx8mq: Enable mtest command for ARM2 and EVK boards ... Browse Code »

  2

  Enable the mtest command and add relevant configurations for tested memory
  range to all ARM2 boards and EVK board.

  Signed-off-by: Ye Li
  (cherry picked from commit bb3dfa130dd0af57dfe7a41869f6ecd843e6c558)

  Ye Li

  2018-08-28 16:33:05 +0800  

15 Aug, 2018

1 commit

• 40bc49dcf   MLK-19132-3 fastboot: Remove CONFIG_BCB_SUPPORT for BSP u-boot ... Browse Code »

  Remove CONFIG_BCB_SUPPORT config from BSP u-boot defconfig files.
  So that we can eliminate such errors during boot up:

  can't find partition: misc, dump the partition table
  idx 0, ptn 0 name='gpt' start=0 len=2048
  idx 1, ptn 0 name='tos' start=0 len=2047
  idx 2, ptn 0 name='all' start=0 len=7864320
  idx 3, ptn 0 name='bootloader' start=2 len=4094
  idx 4, ptn 1 name='mmcsdb1' start=20480 len=1024000
  idx 5, ptn 2 name='mmcsdb2' start=1228800 len=6635520
  cannot get the partion info for misc
  Cannot find partition 4080
  do_raw_read failed, ret 1
  read_bootctl, bcb_rw_block read failed
  read command failed

  Signed-off-by: Ye Li
  (cherry picked from commit 4d282a7a429876f1c1c67754a1d5c7aaaf75bb43)

  Ye Li

  2018-08-15 15:31:06 +0800  

11 Aug, 2018

1 commit

• 21ce8ab67   MLK-19181-3: defconfig: iMX850D enable USB SDP ... Browse Code »

  14

  uuu can download whole uboot and run it
  fastboot also enabled.

  malloc start at 0x182000, size is 0x6000 (24K)
  So BSS and malloc use all OCRAM_S

  stack move to endof OCRAM 0x91FFF0.
  ATF start at 91000

  AFT about 48K, 0x91000 - 0x91D000,

  Stack size is about 16K.

  Signed-off-by: Frank Li

  Frank Li

  2018-08-11 01:10:31 +0800  

27 Apr, 2018

5 commits

• a84dedb35   MLK-17404-7 config: Adding support for i.MX8M HDMI splash ... Browse Code »

  2

  Adding support for i.MX8M HDMI splash screen

  Signed-off-by: Oliver Brown
  (cherry picked from commit d8aac64be7d83847cff8a2235e1be677964a1a9d)

  Oliver Brown

  2018-04-27 21:14:49 +0800  
• 339bc1a3a   MLK-16238-3 imx8m_evk: enable TMU ... Browse Code »

  14

  Update defconfig to enable TMU for i.MX8M EVK board.

  Signed-off-by: Ye Li

  Ye Li

  2018-04-27 17:32:16 +0800  
• 27345e2b5   MLK-18159-11 imx8mq_evk: Add Typec USB port and USB host support ... Browse Code »

  14

  i.MX8MQ EVK has two USB ports, the port 0 is typec, the port 1 is host.
  This patch enables both device and host mode (xhci) for typec port by setting tcpc
  to relevant UFP/DFP mode. For port 1, it is only supports the host mode (xhci).

  PD charge is enabled at default on typec port for the dead battery. In this case,
  the typec port only works in device mode.

  Signed-off-by: Ye Li

  Ye Li

  2018-04-27 17:32:15 +0800  
• 3a17aa165   MLK-17050 imx8m: print out atf commit ... Browse Code »

  13

  Print out atf commit in U-Boot.

  Signed-off-by: Peng Fan
  (cherry picked from commit df89948806c38e38119767a67ef0e18f24ac886b)

  Peng Fan

  2018-04-27 17:32:14 +0800  
• 68ef7f2c5   MLK-18159-8 imx8mq_evk: Add i.MX8MQ EVK board support ... Browse Code »

  Add board level codes and build config for i.MX8MQ EVK board.
  Support SPL to initialize the DDR and load u-boot.

  Signed-off-by: Ye Li

  Ye Li

  2018-04-27 17:32:06 +0800