17 Jun, 2018
1 commit
-
Now that we have generic EFI payload support, drop EFI-specific test
logics in BayTrail Kconfig and codes, and all BayTrail boards too.Signed-off-by: Bin Meng
Reviewed-by: Simon Glass
07 May, 2018
1 commit
-
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.Signed-off-by: Tom Rini
19 Oct, 2017
1 commit
-
Azalia configuration may be different across boards, hence it's not
appropriate to do that in the SoC level. Instead, let's make the
SoC update_fsp_azalia_configs() routine as a weak version, and do
the actual work in the board codes.So far it seems only som-db5800-som-6867 board enables the Azalia.
Move the original codes into som-db5800-som-6867.c.Signed-off-by: Bin Meng
Reviewed-by: Stefan Roese
12 Oct, 2017
1 commit
-
When building with W=1 errors like the one below is seen:
board/freescale/mx6sabresd/mx6sabresd.c:546:5: warning:
no previous prototype for ‘overwrite_console’
[-Wmissing-prototypes] int overwrite_console(void)Fix the build warnings by including .
Signed-off-by: Diego Dorta
Reviewed-by: Fabio Estevam
01 Aug, 2017
3 commits
-
Only a specific type of SPI flash exists on a board, having board
Kconfig to select the SPI flash seems to make more sense. Other
flash types are not necessary except coreboot, which implies all
available flash drivers there.Signed-off-by: Bin Meng
Reviewed-by: Simon Glass -
This is architecture-dependent early initialization hence should
be put in the platform Kconfig.Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass -
CONFIG_BOARD_EARLY_INIT_F literally indicates board-specific codes
and should be not 'default y' for all x86 boards.Signed-off-by: Bin Meng
Reviewed-by: Andy Shevchenko
Reviewed-by: Simon Glass
12 Jul, 2017
2 commits
-
Change is consistent with other SOCs and it is in preparation
for adding SOMs. SOC's related files are moved from cpu/ to
mach-imx/.This change is also coherent with the structure in kernel.
Signed-off-by: Stefano Babic
CC: Fabio Estevam
CC: Akshay Bhat
CC: Ken Lin
CC: Marek Vasut
CC: Heiko Schocher
CC: "Sébastien Szymanski"
CC: Christian Gmeiner
CC: Stefan Roese
CC: Patrick Bruenn
CC: Troy Kisky
CC: Nikita Kiryanov
CC: Otavio Salvador
CC: "Eric Bénard"
CC: Jagan Teki
CC: Ye Li
CC: Peng Fan
CC: Adrian Alonso
CC: Alison Wang
CC: Tim Harvey
CC: Martin Donnelly
CC: Marcin Niestroj
CC: Lukasz Majewski
CC: Adam Ford
CC: "Albert ARIBAUD (3ADEV)"
CC: Boris Brezillon
CC: Soeren Moch
CC: Richard Hu
CC: Wig Cheng
CC: Vanessa Maegima
CC: Max Krummenacher
CC: Stefan Agner
CC: Markus Niebel
CC: Breno Lima
CC: Francesco Montefoschi
CC: Jaehoon Chung
CC: Scott Wood
CC: Joe Hershberger
CC: Anatolij Gustschin
CC: Simon Glass
CC: "Andrew F. Davis"
CC: "Łukasz Majewski"
CC: Patrice Chotard
CC: Nobuhiro Iwamatsu
CC: Hans de Goede
CC: Masahiro Yamada
CC: Stephen Warren
CC: Andre Przywara
CC: "Álvaro Fernández Rojas"
CC: York Sun
CC: Xiaoliang Yang
CC: Chen-Yu Tsai
CC: George McCollister
CC: Sven Ebenfeld
CC: Filip Brozovic
CC: Petr Kulhavy
CC: Eric Nelson
CC: Bai Ping
CC: Anson Huang
CC: Sanchayan Maity
CC: Lokesh Vutla
CC: Patrick Delaunay
CC: Gary Bisson
CC: Alexander Graf
CC: u-boot@lists.denx.de
Reviewed-by: Fabio Estevam
Reviewed-by: Christian Gmeiner -
At present CONFIG_CMD_SATA enables the 'sata' command which also brings
in SATA support. Some boards may wish to enable SATA without the command.
Add a separate CONFIG to permit this.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
13 Apr, 2017
4 commits
-
Apply the proper setting for the reserved bits in SetDes Test and System Mode Control register
to avoid the voltage peak issue while we do the IEEE PHY comformance testSigned-off-by: Ken Lin
Acked-by: Akshay Bhat -
Add the delay (10ms) to ensure the clock is stable and to meet the clock-to-reset(1ms) requirement recommended in the AR8033 datasheet
Signed-off-by: Ken Lin
Acked-by: Akshay Bhat -
Change the PMIC bulk configuration from auto mode to sync mode to avoid the voltage shutdown issue
Signed-off-by: Ken Lin
Acked-by: Akshay Bhat -
Add the configuration options for display initialization in case we need to
do the display initialization in kernel to support different timing settingsSigned-off-by: Ken Lin
Acked-by: Akshay Bhat
24 Sep, 2016
1 commit
-
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content. (both just wrap )Replace all include directives for with .
Signed-off-by: Masahiro Yamada
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini
07 Sep, 2016
1 commit
-
Add support for Advantech DMS-BA16 board. The board is based on Advantech
BA16 module which has a i.MX6D processor. The board supports:
- FEC Ethernet
- USB Ports
- SDHC and MMC boot
- SPI NOR
- LVDS and HDMI displayBasic information about the module:
- Module manufacturer: Advantech
- CPU: Freescale ARM Cortex-A9 i.MX6D
- SPECS:
Up to 2GB Onboard DDR3 Memory;
Up to 16GB Onboard eMMC NAND Flash
Supports OpenGL ES 2.0 and OpenVG 1.1
HDMI, 24-bit LVDS
1x UART, 2x I2C, 8x GPIO,
4x Host USB 2.0 port, 1x USB OTG port,
1x micro SD (SDHC),1x SDIO, 1x SATA II,
1x 10/100/1000 Mbps Ethernet, 1x PCIe X1 Gen2Signed-off-by: Akshay Bhat
Cc: u-boot@lists.denx.de
Cc: sbabic@denx.de
12 Jul, 2016
1 commit
-
Add support for Advantech SOM-DB5800 with the SOM-6867 installed.
This is very similar to conga-qeval20-qa3-e3845 in that there is a
reference carrier board (SOM-DB5800) with a Baytrail based SoM (SOM-6867)
installed.Currently supported:
- 2x UART (From ITE EC on SOM-6867) routed to COM3/4 connectors on
SOM-DB5800.
- 4x USB 2.0 (EHCI)
- Video
- SATA
- Ethernet
- PCIe
- Realtek ALC892 HD Audio
Pad configuration for HDA_RSTB, HDA_SYNC, HDA_CLK, HDA_SDO
HDA_SDI0 is set in DT to enable HD Audio codec.
Pin defaults for codec pin complexs are not changed.Not supported:
- Winbond Super I/O (Must be disabled with jumpers on SOM-DB8500)
- USB 3.0 (XHCI)
- TPMSigned-off-by: George McCollister
Reviewed-by: Simon Glass
Reviewed-by: Bin Meng