Eric Lee / smarc-uboot

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

06 Nov, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

04 Oct, 2017

1 commit

  • a95aee6af   usb: gadget: Make g_dnl USB settings common ... Browse Code »

    The g_dnl USB settings for the vendor ID, product ID and manufacturer are
    actually common settings that can and should be shared by all the gadgets.

    Make them common by renaming them, and convert all the users.

    Reviewed-by: Simon Glass
    Reviewed-by: Lukasz Majewski
    Signed-off-by: Maxime Ripard

    Maxime Ripard
     

08 Sep, 2017

2 commits

28 Aug, 2017

1 commit

15 Aug, 2017

1 commit

11 Aug, 2017

1 commit

  • 21fd01b8b   at91, smartweb: use SPL_SYS_MALLOC_F_LEN ... Browse Code »

    commit f1896c45cb2f: spl: make SPL and normal u-boot stage use independent SYS_MALLOC_F_LEN
    introduced independent SYS_MALLOC_F_LEN for SPL and U-Boot.

    Use it on the smartweb board, as above commit broke
    the smartweb board.

    Signed-off-by: Heiko Schocher

    Heiko Schocher
     

08 Aug, 2017

1 commit

01 Aug, 2017

1 commit

  • 8f1a80e99   configs: Migrate CMD_NAND* ... Browse Code »

    Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS
    CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the
    defconfig files.

    Tested-by: Adam Ford
    Signed-off-by: Tom Rini
    Reviewed-by: Bin Meng

    Tom Rini
     

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

25 Jul, 2017

1 commit

29 Jun, 2017

1 commit

19 Mar, 2017

1 commit

  • 3a649407a   arm: Migrate SYS_THUMB_BUILD to Kconfig, introduce SPL_SYS_THUMB_BUILD ... Browse Code »
    20

    Today, we have cases where we wish to build all of U-Boot in Thumb2 mode for
    various reasons. We also have cases where we only build SPL in Thumb2 mode due
    to size constraints and wish to build the rest of the system in ARM mode. So
    in this migration we introduce a new symbol as well, SPL_SYS_THUMB_BUILD to
    control if we build everything or just SPL (or in theory, just U-Boot) in
    Thumb2 mode.

    Signed-off-by: Tom Rini
    Acked-by: Siarhei Siamashka

    Tom Rini
     

14 Mar, 2017

1 commit

28 Jan, 2017

1 commit

26 Jan, 2017

1 commit

21 Jan, 2017

1 commit

  • 40d5534cf   ARM: Default to using optimized memset and memcpy routines ... Browse Code »

    We have long had available optimized versions of the memset and memcpy
    functions that are borrowed from the Linux kernel. We should use these
    in normal conditions as the speed wins in many workflows outweigh the
    relatively minor size increase. However, we have a number of places
    where we're simply too close to size limits in SPL and must be able to
    make the size vs performance trade-off in those cases.

    Cc: Philippe Reynes
    Cc: Eric Jarrige
    Cc: Heiko Schocher
    Cc: Magnus Lilja
    Cc: Lokesh Vutla
    Cc: Chander Kashyap
    Cc: Akshay Saraswat
    Cc: Simon Glass
    Cc: Stefan Roese
    Signed-off-by: Tom Rini
    Acked-by: Stefan Roese
    Reviewed-by: Simon Glass

    Tom Rini
     

30 Dec, 2016

1 commit

  • c27269953   mmc: complete unfinished move of CONFIG_MMC ... Browse Code »
    26

    Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
    a Kconfig entry for this option without any actual moves, then
    commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved
    instances only for SUNXI.

    We generally do not like such partial moves. This kind of work
    is automated by tools/moveconfig.py, so it is pretty easy to
    complete this move.

    I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
    This shortens the configs and will ease new board porting.

    This commit was created as follows:

    [1] Edit Kconfig (remove the "depends on", add the "default",
    copy the prompt and help message from Linux)

    [2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     

12 Oct, 2016

1 commit

27 Sep, 2016

1 commit

  • 6828e602b   dfu: Migrate to Kconfig ... Browse Code »
    14

    Introduce a hidden USB_FUNCTION_DFU Kconfig option and select it for
    CMD_DFU (as we must have the DFU command enabled to do anything DFU).
    Make all of the entries in drivers/dfu/Kconfig depend on CMD_DFU and add
    options for all of the back end choices that DFU can make use of.

    Cc: Lukasz Majewski
    Signed-off-by: Tom Rini
    Acked-by: Lukasz Majewski

    Tom Rini
     

20 Sep, 2016

1 commit

17 Sep, 2016

5 commits

27 Jun, 2016

1 commit

10 Jun, 2016

1 commit

26 Apr, 2016

3 commits

20 Apr, 2016

2 commits

26 Mar, 2016

1 commit

  • f9d0fd8a5   usb: gadget: Move CONFIG_USB_GADGET to Kconfig ... Browse Code »

    The description was borrowed from kernel. "tristate" type was changed
    to "bool" (I believe we don't support modules for u-boot yet, right?).
    CONFIG_USB_GADGET requires CONFIG_USB to be defined too, so add it along
    as well.

    Definitions were added to defconfig files in a way that
    "make savedefconfig" generates exactly the same file as used defconfig.

    Signed-off-by: Sam Protsenko
    [trini: Add zynq_zc702 conversion]
    Signed-off-by: Tom Rini

    Sam Protsenko
     

15 Mar, 2016

2 commits

  • 73223f0e1   Kconfig: Move CONFIG_FIT and related options to Kconfig ... Browse Code »

    There are already two FIT options in Kconfig but the CONFIG options are
    still in the header files. We need to do a proper move to fix this.

    Move these options to Kconfig and tidy up board configuration:

    CONFIG_FIT
    CONFIG_OF_BOARD_SETUP
    CONFIG_OF_SYSTEM_SETUP
    CONFIG_FIT_SIGNATURE
    CONFIG_FIT_BEST_MATCH
    CONFIG_FIT_VERBOSE
    CONFIG_OF_STDOUT_VIA_ALIAS
    CONFIG_RSA

    Unfortunately the first one is a little complicated. We need to make sure
    this option is not enabled in SPL by this change. Also this option is
    enabled automatically in the host builds by defining CONFIG_FIT in the
    image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
    be used in files that are built on the host but must also build for U-Boot
    and SPL.

    Note: Masahiro's moveconfig.py script is amazing.

    Signed-off-by: Simon Glass
    [trini: Add microblaze change, various configs/ re-applies]
    Signed-off-by: Tom Rini

    Simon Glass
     
  • 69e173eb5   Move CONFIG_OF_LIBFDT to Kconfig ... Browse Code »
    66

    Move this option to Kconfig and tidy up existing boards.

    Signed-off-by: Simon Glass

    Simon Glass