Eric Lee / smarc-uboot

11 Feb, 2018

2 commits

26 Jan, 2018

1 commit

19 Dec, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

04 Oct, 2017

4 commits

  • cfa34996b   cmd: fastboot: Rework fastboot dependency ... Browse Code »

    Fastboot need a bunch of options to be operating properly, such as the
    g_dnl gadget, the fastboot command, and some options that make sense. Since
    fastboot is now part of Kconfig, make sure we have them right.

    That will also reduce the boilerplate in the defconfigs.

    Reviewed-by: Łukasz Majewski
    Reviewed-by: Simon Glass
    Signed-off-by: Maxime Ripard

    Maxime Ripard
     
  • 654b02b18   sunxi: imply USB_GADGET ... Browse Code »

    A good number of our boards have USB_GADGET enabled. Imply it so that all
    the boards can benefit from it, and remove some boilerplate from our
    defconfigs.

    Reviewed-by: Łukasz Majewski
    Reviewed-by: Simon Glass
    Signed-off-by: Maxime Ripard

    Maxime Ripard
     
  • e02687bda   sunxi: provide default USB gadget setup ... Browse Code »

    All the Allwinner boards use the same manufacturer, VID and PID for the
    gadgets. Make them the defaults to remove some boilerplate from our
    defconfigs.

    Reviewed-by: Łukasz Majewski
    Reviewed-by: Simon Glass
    Signed-off-by: Maxime Ripard

    Maxime Ripard
     
  • a95aee6af   usb: gadget: Make g_dnl USB settings common ... Browse Code »

    The g_dnl USB settings for the vendor ID, product ID and manufacturer are
    actually common settings that can and should be shared by all the gadgets.

    Make them common by renaming them, and convert all the users.

    Reviewed-by: Simon Glass
    Reviewed-by: Lukasz Majewski
    Signed-off-by: Maxime Ripard

    Maxime Ripard
     

02 Sep, 2017

2 commits

  • 48f6232e5   Kconfig: Migrate all of cmd/fastboot/Kconfig to defconfigs ... Browse Code »

    - Move ANDROID_IMAGE_SUPPORT to top level Kconfig under images as it's
    not strictly part of fastboot.
    - Add some defaults for the fastboot buffer location and size
    - Migrate all options listed in cmd/fastboot/Kconfig
    - Cleanup the README

    Signed-off-by: Tom Rini

    Tom Rini
     
  • ecad7051b   configs: Migrate all of the existing USB symbols, except fastboot ... Browse Code »
    20

    This syncs all of the currently Kconfig'd symbols out of the headers and
    into the defconfig files. This has two exceptions, first am335x_evm
    needs to be converted to DM in SPL and then it can stop undef'ing
    CONFIG_DM_USB. Leaving this as-is results in a build failure, and
    without work, run time failure. The other case is am43xx_evm.h and in
    turn am43xx_evm_usbhost_boot. The problem here is that we need DWC3 USB
    host mode in SPL, but still desire to have gadget mode in U-Boot proper.

    Signed-off-by: Tom Rini

    Tom Rini
     

28 Aug, 2017

1 commit

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

10 Jul, 2017

1 commit

07 Jul, 2017

1 commit

01 May, 2017

1 commit

20 Apr, 2017

1 commit

  • 7095f8641   sunxi: Convert CONS_INDEX to Kconfig ... Browse Code »
    40

    Convert the CONS_INDEX configuration to Kconfig.
    Update sunxi's defconfigs to remove SYS_EXTRA_OPTIONS variable not
    needed anymore.
    Default value is 1 except for sun5i (equals 2) and sun8i (equals 5).

    Signed-off-by: Mylène Josserand
    [Maxime: Added a depends on ARCH_SUNXI to avoid build breakages]
    Signed-off-by: Maxime Ripard

    Mylène Josserand
     

14 Mar, 2017

1 commit

28 Jan, 2017

3 commits

27 Sep, 2016

1 commit

  • 6828e602b   dfu: Migrate to Kconfig ... Browse Code »
    14

    Introduce a hidden USB_FUNCTION_DFU Kconfig option and select it for
    CMD_DFU (as we must have the DFU command enabled to do anything DFU).
    Make all of the entries in drivers/dfu/Kconfig depend on CMD_DFU and add
    options for all of the back end choices that DFU can make use of.

    Cc: Lukasz Majewski
    Signed-off-by: Tom Rini
    Acked-by: Lukasz Majewski

    Tom Rini
     

17 Sep, 2016

3 commits

09 Sep, 2016

1 commit

17 Jun, 2016

1 commit

10 Jun, 2016

1 commit

25 May, 2016

1 commit

  • 0878a8a7d   sunxi: Enable a bunch of commands by default on sunxi ... Browse Code »

    Recently a set of CONFIG_CMD_FOO defines was moved from being defined
    in config_distro_defaults to Kconfig, and added to all sunxi defconfigs
    to compensate.

    Instead of explictly selecting these in all sunxi defconfigs,
    simply always select these for sunxi boards. This makes the defconfigs
    simpler and ensures a consistent set of available commands across all
    sunxi boards.

    Signed-off-by: Hans de Goede

    Hans de Goede
     

15 May, 2016

1 commit

26 Apr, 2016

3 commits

20 Apr, 2016

2 commits

12 Apr, 2016

1 commit

  • 88bb800dd   sunxi: Enable CMD_GPIO on all sunxi boards ... Browse Code »

    We have CONFIG_CMD_GPIO=y in almost all sunxi boards, but after
    its Kconfig conversion it has ended up missing on some recently
    added boards.

    Simply select it for ARCH_SUNXI, so that we get it on all
    sunxi boards for both a consistent user experience and simpler
    defconfig files.

    Signed-off-by: Hans de Goede
    Acked-by: Ian Campbell

    Hans de Goede
     

26 Mar, 2016

1 commit

  • f9d0fd8a5   usb: gadget: Move CONFIG_USB_GADGET to Kconfig ... Browse Code »

    The description was borrowed from kernel. "tristate" type was changed
    to "bool" (I believe we don't support modules for u-boot yet, right?).
    CONFIG_USB_GADGET requires CONFIG_USB to be defined too, so add it along
    as well.

    Definitions were added to defconfig files in a way that
    "make savedefconfig" generates exactly the same file as used defconfig.

    Signed-off-by: Sam Protsenko
    [trini: Add zynq_zc702 conversion]
    Signed-off-by: Tom Rini

    Sam Protsenko
     

24 Mar, 2016

3 commits

  • d75111a79   sunxi: Select CONFIG_OF_BOARD_SETUP from arch/arm/Kconfig ... Browse Code »

    Always select OF_BOARD_SETUP on sunxi, rather then having it in almost
    all our defconfigs. This also fixes it missing from some recently
    added defconfigs.

    This commit also modifies our ft_board_setup() to not cause warnings
    when CONFIG_VIDEO_DT_SIMPLEFB is not set, since we will now always
    build it.

    Signed-off-by: Hans de Goede
    Acked-by: Ian Campbell

    Hans de Goede
     
  • cda192d8c   sunxi: Enable composite video out on the CHIP ... Browse Code »

    The CHIP has a composite video output in the mini-Jack connector, alongside
    with the 2 audio channels. Enable this output in U-Boot.

    Signed-off-by: Alex Kaplan
    Signed-off-by: Maxime Ripard
    Acked-by: Hans de Goede
    Signed-off-by: Hans de Goede

    Alex Kaplan
     
  • 83fbebf21   sunxi: Fix DCDC2 output in CHIP_defconfig ... Browse Code »

    Unlike the datasheet recommendation, the R8 SoC requires a 1.4V supply
    for its CPU when operating at 1Ghz.

    Rely on the default value specified in the Kconfig entry.

    Signed-off-by: Boris Brezillon
    Signed-off-by: Maxime Ripard
    Acked-by: Hans de Goede
    Signed-off-by: Hans de Goede

    Boris Brezillon