24 Feb, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_BOOTP_BOOTPATH
CONFIG_BOOTP_DNS
CONFIG_BOOTP_GATEWAY
CONFIG_BOOTP_HOSTNAME
CONFIG_BOOTP_PXE
CONFIG_BOOTP_SUBNETMASK
CONFIG_CMDLINE_EDITING
CONFIG_AUTO_COMPLETE
CONFIG_SYS_LONGHELP
CONFIG_SUPPORT_RAW_INITRD
CONFIG_ENV_VARS_UBOOT_CONFIGSigned-off-by: Adam Ford
[trini: Re-run the migration]
Signed-off-by: Tom Rini
11 Feb, 2018
1 commit
-
On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
values into the defconfig and removing them from the headers.I did not attempt to add more default values in and for now will leave
that to maintainers.Signed-off-by: Tom Rini
27 Dec, 2017
1 commit
-
Freescale (NXP) boards have lots of defconfig files per board.
I used "imply PANIC_HANG" for them.Signed-off-by: Masahiro Yamada
Reviewed-by: York Sun
27 Oct, 2017
1 commit
-
This macro is defined, but not referenced by anyone.
I did not touch config_whitelist.txt - the CONFIG will be dropped
by the next re-sync.Signed-off-by: Masahiro Yamada
Reviewed-by: York Sun
04 Sep, 2017
4 commits
-
This commit removes definitions of CONFIG_SYS_BARGSIZE defined to be
equal to CONFIG_SYS_CBSIZE in numerous configuration files.We remove such definitions in two situations:
- CONFIG_SYS_CBSIZE is otherwise not defined in the board
configuration file, which means the default value of
CONFIG_SYS_CBSIZE == 256 applies. In this case, the default value
of CONFIG_SYS_BARGSIZE == 512 (common/image.c) is suitable, as it is
larger.- CONFIG_SYS_CBSIZE is defined in the board configuration file, but
to a value equal or less than 512. In this case, the default value
of CONFIG_SYS_BARGSIZE == 512 (common.image.c) is suitable, as it
is equal or larger.Signed-off-by: Thomas Petazzoni
Reviewed-by: Tom Rini -
Now that include/config_fallbacks.h define a sane fallback for
CONFIG_SYS_MAXARGS, we can drop the definition of this constant in all
configurations that were using the default value.Signed-off-by: Thomas Petazzoni
Reviewed-by: Tom Rini -
Now that the fallback value of CONFIG_SYS_PBSIZE in
include/config_fallbacks.h has been adjusted, remove its definition
from a large number of board configuration files.Signed-off-by: Thomas Petazzoni
Reviewed-by: Tom Rini -
Now that include/config_fallbacks.h define a sane fallback for
CONFIG_SYS_CBSIZE, we can drop the definition of this constant in all
configurations that were using the default value.Signed-off-by: Thomas Petazzoni
Reviewed-by: Tom Rini
[trini: Drop from stih410-b2260.h]
Signed-off-by: Tom Rini
12 Aug, 2017
2 commits
-
This patch converts CONFIG_CMD_REGINFO to Kconfig
Signed-off-by: Christophe Leroy
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich -
This converts the following to Kconfig:
CONFIG_CMD_PCISigned-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich
09 Aug, 2017
1 commit
-
Reviewed-by: Joe Hershberger
Signed-off-by: Tom Rini
01 Aug, 2017
1 commit
-
Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS
CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the
defconfig files.Tested-by: Adam Ford
Signed-off-by: Tom Rini
Reviewed-by: Bin Meng
26 Jul, 2017
3 commits
-
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_SPI_FLASHSigned-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_FLASHSigned-off-by: Simon Glass
-
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_MMC
CONFIG_ENV_IS_IN_NAND
CONFIG_ENV_IS_IN_UBI
CONFIG_ENV_IS_NOWHEREIn fact this already exists for sunxi as a 'choice' config. However not
all the choices are available in Kconfig yet so we cannot use that. It
would lead to more than one option being set.In addition, one purpose of this series is to allow the environment to be
stored in more than one place. So the existing choice is converted to a
normal config allowing each option to be set independently.There are not many opportunities for Kconfig updates to reduce the size of
this patch. This was tested with./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC
And then manual updates. This is because for CHAIN_OF_TRUST boards they
can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
now.Signed-off-by: Simon Glass
Signed-off-by: Tom Rini
23 May, 2017
2 commits
-
This converts the following to Kconfig:
CONFIG_CMD_IRQSigned-off-by: Simon Glass
Reviewed-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_CMD_HASHSigned-off-by: Simon Glass
Reviewed-by: Tom Rini
[trini: Rework slightly, enable on some boards again]
Signed-off-by: Tom Rini
22 May, 2017
3 commits
-
This converts the following to Kconfig:
CONFIG_CMD_ERRATASigned-off-by: Simon Glass
Reviewed-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_CMD_EEPROM
CONFIG_CMD_EEPROM_LAYOUT
CONFIG_EEPROM_LAYOUT_HELP_STRINGSigned-off-by: Simon Glass
Reviewed-by: Tom Rini
[trini: Rework Kconfig logic slightly, define EEPROM location on TI eval
platforms]
Signed-off-by: Tom Rini -
Commit 94e3c8c4fd7b ("crypto/fsl - Add progressive hashing support
using hardware acceleration.") created entries for CONFIG_SHA1,
CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and CONFIG_SHA_PROG_HW_ACCEL.
However, no defconfig has migrated to it. Complete the move by first
adding additional logic to various Kconfig files to select this when
required and then use the moveconfig tool. In many cases we can select
these because they are required to implement other drivers. We also
correct how we include the various hashing algorithms in SPL.This commit was generated as follows (after Kconfig additions):
[1] tools/moveconfig.py -y SHA1 SHA256 SHA_HW_ACCEL
[2] tools/moveconfig.py -y SHA_PROG_HW_ACCELNote:
We cannot move SHA_HW_ACCEL and SHA_PROG_HW_ACCEL simultaneously
because there is dependency between them.Cc: Poonam Aggrwal
Cc: Naveen Burmi
Cc: Po Liu
Cc: Shengzhou Liu
Cc: Priyanka Jain
Cc: Shaohui Xie
Cc: Chunhe Lan
Cc: Chander Kashyap
Cc: Steve Rae
Cc: Dirk Eibach
Cc: Feng Li
Cc: Alison Wang
Cc: Sumit Garg
Cc: Mingkai Hu
Cc: York Sun
Cc: Prabhakar Kushwaha
Cc: Jaehoon Chung
Cc: Akshay Saraswat
Cc: Heiko Schocher
Cc: Jagan Teki
Signed-off-by: Tom Rini
Reviewed-by: Simon Glass
Signed-off-by: Tom Rini
20 Mar, 2017
1 commit
-
Move this in to Kconfig with a default of 115200.
Signed-off-by: Philipp Tomsich
[trini: Run moveconfig.py, reword commit slightly]
Signed-off-by: Tom Rini
10 Mar, 2017
1 commit
-
In some cases this is absolutely required, so select this for some secure
features. This also requires migration of RSA_FREESCALE_EXPCc: Ruchika Gupta
Cc: Poonam Aggrwal
Cc: Naveen Burmi
Cc: Po Liu
Cc: Shengzhou Liu
Cc: Priyanka Jain
Cc: Sumit Garg
Cc: Shaohui Xie
Cc: Chunhe Lan
Cc: Feng Li
Cc: Alison Wang
Cc: Mingkai Hu
Cc: York Sun
Cc: Saksham Jain
Cc: Prabhakar Kushwaha
Signed-off-by: Tom Rini
13 Feb, 2017
1 commit
-
We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
not completed. Finish this work by the tool.During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will
make the code more readable. Besides, negative meaning symbols do
not fit in obj-$(CONFIG_...) style Makefiles.This commit was created as follows:
[1] Edit "default n" to "default y" in the config entry in
common/Kconfig.[2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"
[3] Rename the instances in defconfigs by the following:
find . -path './configs/*_defconfig' | xargs sed -i \
-e '/CONFIG_SYS_NO_FLASH=y/d' \
-e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'[4] Change the conditionals by the following:
find . -name '*.[ch]' | xargs sed -i \
-e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
-e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
-e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
-e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'[5] Modify the following manually
- Rename the rest of instances
- Remove the description from README
- Create the new Kconfig entry in drivers/mtd/Kconfig
- Remove the old Kconfig entry from common/Kconfig
- Remove the garbage comments from include/configs/*.hSigned-off-by: Masahiro Yamada
04 Feb, 2017
2 commits
-
Signed-off-by: Tom Rini
Conflicts:
configs/ls1046aqds_defconfig
configs/ls1046aqds_nand_defconfig
configs/ls1046aqds_qspi_defconfig
configs/ls1046aqds_sdcard_ifc_defconfig
configs/ls1046aqds_sdcard_qspi_defconfig
configs/ls1046ardb_emmc_defconfig
configs/ls1046ardb_qspi_defconfig
configs/ls1046ardb_sdcard_defconfig -
Enable IFC from Kconfig.
Signed-off-by: Prabhakar Kushwaha
Reviewed-by: York Sun
28 Jan, 2017
1 commit
-
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay
05 Jan, 2017
2 commits
-
Create driver/ddr/fsl/Kconfig and move existing options. Clean up
existing macros.Signed-off-by: York Sun
[trini: Migrate sbc8641d, xpedite537x and MPC8536DS, run a moveconfig.py -s]
Signed-off-by: Tom Rini -
Use Kconfig option for E500 and E500MC macros.
Signed-off-by: York Sun
03 Dec, 2016
1 commit
-
Some header files have this macro defined conditionally and
redefined unconditionally. Remove all existing definitions.Signed-off-by: York Sun
24 Nov, 2016
1 commit
-
Replace CONFIG_PPC_C29X with ARCH_C29X in Kconfig and clean up existing
macros.Signed-off-by: York Sun
28 Oct, 2016
2 commits
-
Introduce CONFIG_PCI_PNP in Kconfig and move over boards' defconfig
to use that.Signed-off-by: Bin Meng
Reviewed-by: Tom Rini
[trini: Re-generate configs and include/configs/ changes]
Signed-off-by: Tom Rini -
Add 'PCI' as a menu option and migrate all existing users.
Signed-off-by: Tom Rini
Acked-by: Stephen Warren
24 Oct, 2016
1 commit
-
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_IS_IN_ENV
CONFIG_CONSOLE_MUXSigned-off-by: Simon Glass
[trini: Re-order, re-migrate]
Signed-off-by: Tom Rini
12 Oct, 2016
1 commit
-
Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default
in certain architectures. Migrate all config files.Signed-off-by: Lokesh Vutla
Signed-off-by: Tom Rini
17 Sep, 2016
6 commits
-
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
-
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
-
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
-
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
-
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
-
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass