Eric Lee / smarc-uboot

08 Sep, 2017

2 commits

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

16 May, 2017

1 commit

15 May, 2017

1 commit

31 Jan, 2017

1 commit

  • 54925327f   mmc: move CONFIG_GENERIC_MMC to Kconfig ... Browse Code »
    40

    Now, CONFIG_GENERIC_MMC seems equivalent to CONFIG_MMC.

    Let's create an entry for "config GENERIC_MMC" with "default MMC",
    then convert all macro defines in headers to Kconfig. Almost all
    of the defines will go away.

    I see only two exceptions:
    configs/blanche_defconfig
    configs/sandbox_noblk_defconfig

    They define CONFIG_GENERIC_MMC, but not CONFIG_MMC. Something
    might be wrong with these two boards, so should be checked later.

    Anyway, this is the output of the moveconfig tool.

    This commit was created as follows:

    [1] create a config entry in drivers/mmc/Kconfig

    [2] tools/moveconfig.py -r HEAD GENERIC_MMC

    [3] manual clean-up of garbage comments in doc/README.* and
    include/configs/*.h

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Tom Rini

    Masahiro Yamada
     

29 Jan, 2017

1 commit

11 Jan, 2017

1 commit

  • 1d2c0506d   mmc: move more driver config options to Kconfig ... Browse Code »

    Move (and rename) the following CONFIG options to Kconfig:

    CONFIG_DAVINCI_MMC (renamed to CONFIG_MMC_DAVINCI)
    CONFIG_OMAP_HSMMC (renamed to CONFIG_MMC_OMAP_HS)
    CONFIG_MXC_MMC (renamed to CONFIG_MMC_MXC)
    CONFIG_MXS_MMC (renamed to CONFIG_MMC_MXS)
    CONFIG_TEGRA_MMC (renamed to CONFIG_MMC_SDHCI_TEGRA)
    CONFIG_SUNXI_MMC (renamed to CONFIG_MMC_SUNXI)

    They are the same option names as used in Linux.

    This commit was created as follows:

    [1] Rename the options with the following command:

    find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
    -type f -print | xargs sed -i -e '
    s/CONFIG_DAVINCI_MMC/CONFIG_MMC_DAVINCI/g
    s/CONFIG_OMAP_HSMMC/CONFIG_MMC_OMAP_HS/g
    s/CONFIG_MXC_MMC/CONFIG_MMC_MXC/g
    s/CONFIG_MXS_MMC/CONFIG_MMC_MXS/g
    s/CONFIG_TEGRA_MMC/CONFIG_MMC_SDHCI_TEGRA/g
    s/CONFIG_SUNXI_MMC/CONFIG_MMC_SUNXI/g
    '

    [2] Commit the changes

    [3] Create entries in driver/mmc/Kconfig.
    (copied from Linux)

    [4] Move the options with the following command
    tools/moveconfig.py -y -r HEAD \
    MMC_DAVINCI MMC_OMAP_HS MMC_MXC MMC_MXS MMC_SDHCI_TEGRA MMC_SUNXI

    [5] Sort and align drivers/mmc/Makefile for readability

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Marek Vasut

    Masahiro Yamada
     

30 Dec, 2016

1 commit

  • c27269953   mmc: complete unfinished move of CONFIG_MMC ... Browse Code »
    26

    Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
    a Kconfig entry for this option without any actual moves, then
    commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved
    instances only for SUNXI.

    We generally do not like such partial moves. This kind of work
    is automated by tools/moveconfig.py, so it is pretty easy to
    complete this move.

    I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
    This shortens the configs and will ease new board porting.

    This commit was created as follows:

    [1] Edit Kconfig (remove the "depends on", add the "default",
    copy the prompt and help message from Linux)

    [2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     

10 Sep, 2016

1 commit

26 Apr, 2016

2 commits

19 Feb, 2016

1 commit

19 Jan, 2016

1 commit

  • 5b8031ccb   Add more SPDX-License-Identifier tags ... Browse Code »
    40

    In a number of places we had wordings of the GPL (or LGPL in a few
    cases) license text that were split in such a way that it wasn't caught
    previously. Convert all of these to the correct SPDX-License-Identifier
    tag.

    Signed-off-by: Tom Rini

    Tom Rini
     

25 Nov, 2015

1 commit

13 Aug, 2015

1 commit

  • 181bd9dc6   kconfig: add config option for shell prompt ... Browse Code »
    102

    Add option to set shell prompt string from menuconfig and migrate
    boards globally.

    The migration is done as follows:
    - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the
    entry moved to their defconfig files.
    - Boards that defined some kind of #ifdef logic which selects the
    CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT
    right before the #ifdef logic and were left alone.
    - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus
    CONFIG_SYS_PROMPT was removed from all _common.h and _common.h
    files. This results in a streamlined default value across platforms, and
    includes the following files: spear-common, sunxi-common, mv-common,
    ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common.
    - Boards that relied on _common.h values of CONFIG_SYS_PROMPT were
    not updated in their respective defconfig files under the assumption that
    since they did not explicitly define a value, they're fine with whatever
    the default is.
    - On the other hand, boards that relied on a value defined in some
    _common.h file such as woodburn_common, rpi-common,
    bur_am335x_common, ls2085a_common, siemens_am33x_common, and
    omap3_evm_common, had their values moved to the respective defconfig files.
    - The define V_PROMPT was removed, since it is not used anywhere except for
    assigning a value for CONFIG_SYS_PROMPT.

    Cc: Tom Rini
    Cc: Masahiro Yamada
    Cc: Stefano Babic
    Cc: Igor Grinberg
    Signed-off-by: Nikita Kiryanov
    [trini: Add spring, sniper, smartweb to conversion]
    Signed-off-by: Tom Rini

    Nikita Kiryanov
     

06 Aug, 2015

2 commits

26 Jun, 2015

1 commit

  • c9bb942e2   Move default y configs out of arch/board Kconfig ... Browse Code »

    Some archs/boards specify their own default by pre-defining the config
    which causes the Kconfig system to mix up the order of the configs in
    the defconfigs... This will cause merge pain if allowed to proliferate.

    Remove the configs that behave this way from the archs.

    A few configs still remain, but that is because they only exist as
    defaults and do not have a proper Kconfig entry. Those appear to be:

    SPIFLASH
    DISPLAY_BOARDINFO

    Signed-off-by: Joe Hershberger
    [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates,
    drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM]
    Signed-off-by: Tom Rini

    Joe Hershberger
     

01 Jun, 2015

1 commit

05 Mar, 2015

1 commit

  • 026baff75   ARM: tegra: move common config defines centrally ... Browse Code »

    All boards need CONFIG_BOARD_EARLY_INIT_F, and many actively need
    CONFIG_BOARD_LATE_INIT. Move both of these into tegra-common.h so that
    board config headers don't need to repeatedly define them.

    Later commits will add new code in board_late_init() which applies to
    all boards, so CONFIG_BOARD_LATE_INIT should be enabled for all Tegra
    boards.

    Signed-off-by: Stephen Warren
    Signed-off-by: Tom Warren

    Stephen Warren
     

12 Dec, 2014

1 commit

  • b0e6ef464   dm: i2c: tegra: Convert to driver model ... Browse Code »

    This converts all Tegra boards over to use driver model for I2C. The driver
    is adjusted to use driver model and the following obsolete CONFIGs are
    removed:

    - CONFIG_SYS_I2C_INIT_BOARD
    - CONFIG_I2C_MULTI_BUS
    - CONFIG_SYS_MAX_I2C_BUS
    - CONFIG_SYS_I2C_SPEED
    - CONFIG_SYS_I2C

    This has been tested on:
    - trimslice (no I2C)
    - beaver
    - Jetson-TK1

    It has not been tested on Tegra 114 as I don't have that board.

    Acked-by: Heiko Schocher
    Signed-off-by: Simon Glass

    Simon Glass
     

25 Sep, 2014

2 commits

  • f1ef2b623   kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig ... Browse Code »
    86

    This option specifies the default Device Tree used for the run-time
    configuration of U-Boot.

    Signed-off-by: Masahiro Yamada
    Cc: Simon Glass
    Cc: Stephen Warren
    Cc: Minkyu Kang
    Cc: Michal Simek

    Masahiro Yamada
     
  • 783e6a72b   kconfig: move CONFIG_OF_* to Kconfig ... Browse Code »
    43

    This commit moves:
    CONFIG_OF_CONTROL
    CONFIG_OF_SEPARATE
    CONFIG_OF_EMBED
    CONFIG_OF_HOSTFILE

    Because these options are currently not supported for SPL,
    the "Device Tree Control" menu does not appear in the SPL
    configuration.

    Note:
    zynq-common.h should be adjusted so as not to change the
    default value of CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME.

    Signed-off-by: Masahiro Yamada
    Acked-by: Simon Glass
    Cc: Stephen Warren
    Cc: Minkyu Kang
    Acked-by: Michal Simek

    Masahiro Yamada
     

05 Mar, 2014

1 commit

  • 1ace40223   sizes.h - consolidate for all architectures ... Browse Code »

    Copied from Linux sources "include/linux/sizes.h" commit
    413541dd66d51f791a0b169d9b9014e4f56be13c

    Signed-off-by: Alexey Brodkin

    Cc: Vineet Gupta
    Cc: Tom Rini
    Cc: Stefan Roese
    Cc: Albert Aribaud
    Acked-by: Tom Rini
    Acked-by: Stefan Roese
    [trini: Add bcm Kona platforms to the patch]
    Signed-off-by: Tom Rini

    Alexey Brodkin
     

20 Aug, 2013

1 commit

23 Jul, 2013

1 commit

12 Jul, 2013

2 commits

14 Jun, 2013

1 commit

  • 91171091c   ARM: tegra: make use of negative ENV_OFFSET on NVIDIA boards ... Browse Code »

    Use a negative value of CONFIG_ENV_OFFSET for all NVIDIA reference boards
    that store the U-Boot environment in the 2nd eMMC boot partition. This
    makes U-Boot agnostic to the size of the eMMC boot partition, which can
    vary depending on which eMMC device was actually stuffed into the board.

    Signed-off-by: Stephen Warren
    Acked-by: Tom Warren
    Signed-off-by: Andy Fleming

    Stephen Warren
     

26 Mar, 2013

2 commits

15 Mar, 2013

1 commit

12 Feb, 2013

1 commit