Eric Lee / smarc-uboot

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

31 Jan, 2018

1 commit

  • 76e22222d   Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_SYS_DV_CLKMODE
    CONFIG_SYS_DA850_PLL0_POSTDIV
    CONFIG_SYS_DA850_PLL0_PLLDIV1
    CONFIG_SYS_DA850_PLL0_PLLDIV2
    CONFIG_SYS_DA850_PLL0_PLLDIV3
    CONFIG_SYS_DA850_PLL0_PLLDIV4
    CONFIG_SYS_DA850_PLL0_PLLDIV5
    CONFIG_SYS_DA850_PLL0_PLLDIV6
    CONFIG_SYS_DA850_PLL0_PLLDIV7
    CONFIG_SYS_DA850_PLL1_POSTDIV
    CONFIG_SYS_DA850_PLL1_PLLDIV1
    CONFIG_SYS_DA850_PLL1_PLLDIV2
    CONFIG_SYS_DA850_PLL1_PLLDIV3

    Signed-off-by: Adam Ford

    Adam Ford
     

23 Jan, 2018

2 commits

04 Sep, 2017

2 commits

12 Aug, 2017

1 commit

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

06 Jun, 2017

1 commit

01 Jun, 2017

1 commit

  • 221a949eb   Kconfig: Finish migration of hashing commands ... Browse Code »

    Currently these (board agnostic) commands cannot be selected using
    menuconfig and friends. Fix this the obvious way. As part of this,
    don't muddle the meaning of CONFIG_HASH_VERIFY to mean both 'hash -v'
    and "we have a hashing command" as this makes the Kconfig logic odd.

    Signed-off-by: Daniel Thompson
    [trini: Re-apply, add imply for a few cases, run moveconfig.py, also
    migrate CRC32_VERIFY]
    Signed-off-by: Tom Rini

    Daniel Thompson
     

01 May, 2017

1 commit

20 Mar, 2017

1 commit

13 Feb, 2017

1 commit

  • e856bdcfb   flash: complete CONFIG_SYS_NO_FLASH move with renaming ... Browse Code »
    20

    We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
    not completed. Finish this work by the tool.

    During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
    Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
    than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will
    make the code more readable. Besides, negative meaning symbols do
    not fit in obj-$(CONFIG_...) style Makefiles.

    This commit was created as follows:

    [1] Edit "default n" to "default y" in the config entry in
    common/Kconfig.

    [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"

    [3] Rename the instances in defconfigs by the following:
    find . -path './configs/*_defconfig' | xargs sed -i \
    -e '/CONFIG_SYS_NO_FLASH=y/d' \
    -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'

    [4] Change the conditionals by the following:
    find . -name '*.[ch]' | xargs sed -i \
    -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
    -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
    -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
    -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'

    [5] Modify the following manually
    - Rename the rest of instances
    - Remove the description from README
    - Create the new Kconfig entry in drivers/mtd/Kconfig
    - Remove the old Kconfig entry from common/Kconfig
    - Remove the garbage comments from include/configs/*.h

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

31 Jan, 2017

1 commit

  • 54925327f   mmc: move CONFIG_GENERIC_MMC to Kconfig ... Browse Code »
    40

    Now, CONFIG_GENERIC_MMC seems equivalent to CONFIG_MMC.

    Let's create an entry for "config GENERIC_MMC" with "default MMC",
    then convert all macro defines in headers to Kconfig. Almost all
    of the defines will go away.

    I see only two exceptions:
    configs/blanche_defconfig
    configs/sandbox_noblk_defconfig

    They define CONFIG_GENERIC_MMC, but not CONFIG_MMC. Something
    might be wrong with these two boards, so should be checked later.

    Anyway, this is the output of the moveconfig tool.

    This commit was created as follows:

    [1] create a config entry in drivers/mmc/Kconfig

    [2] tools/moveconfig.py -r HEAD GENERIC_MMC

    [3] manual clean-up of garbage comments in doc/README.* and
    include/configs/*.h

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Tom Rini

    Masahiro Yamada
     

28 Jan, 2017

1 commit

26 Jan, 2017

1 commit

11 Jan, 2017

2 commits

  • 1d2c0506d   mmc: move more driver config options to Kconfig ... Browse Code »

    Move (and rename) the following CONFIG options to Kconfig:

    CONFIG_DAVINCI_MMC (renamed to CONFIG_MMC_DAVINCI)
    CONFIG_OMAP_HSMMC (renamed to CONFIG_MMC_OMAP_HS)
    CONFIG_MXC_MMC (renamed to CONFIG_MMC_MXC)
    CONFIG_MXS_MMC (renamed to CONFIG_MMC_MXS)
    CONFIG_TEGRA_MMC (renamed to CONFIG_MMC_SDHCI_TEGRA)
    CONFIG_SUNXI_MMC (renamed to CONFIG_MMC_SUNXI)

    They are the same option names as used in Linux.

    This commit was created as follows:

    [1] Rename the options with the following command:

    find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
    -type f -print | xargs sed -i -e '
    s/CONFIG_DAVINCI_MMC/CONFIG_MMC_DAVINCI/g
    s/CONFIG_OMAP_HSMMC/CONFIG_MMC_OMAP_HS/g
    s/CONFIG_MXC_MMC/CONFIG_MMC_MXC/g
    s/CONFIG_MXS_MMC/CONFIG_MMC_MXS/g
    s/CONFIG_TEGRA_MMC/CONFIG_MMC_SDHCI_TEGRA/g
    s/CONFIG_SUNXI_MMC/CONFIG_MMC_SUNXI/g
    '

    [2] Commit the changes

    [3] Create entries in driver/mmc/Kconfig.
    (copied from Linux)

    [4] Move the options with the following command
    tools/moveconfig.py -y -r HEAD \
    MMC_DAVINCI MMC_OMAP_HS MMC_MXC MMC_MXS MMC_SDHCI_TEGRA MMC_SUNXI

    [5] Sort and align drivers/mmc/Makefile for readability

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Marek Vasut

    Masahiro Yamada
     
  • 0ec6eb549   ARM: davinci: remove unused CONFIG_DAVINCI_MMC_SD1 ... Browse Code »

    This CONFIG is not referenced from anywhere.

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Marek Vasut

    Masahiro Yamada
     

30 Dec, 2016

1 commit

  • c27269953   mmc: complete unfinished move of CONFIG_MMC ... Browse Code »
    26

    Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
    a Kconfig entry for this option without any actual moves, then
    commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved
    instances only for SUNXI.

    We generally do not like such partial moves. This kind of work
    is automated by tools/moveconfig.py, so it is pretty easy to
    complete this move.

    I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
    This shortens the configs and will ease new board porting.

    This commit was created as follows:

    [1] Edit Kconfig (remove the "depends on", add the "default",
    copy the prompt and help message from Linux)

    [2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     

04 Dec, 2016

2 commits

10 Sep, 2016

1 commit

02 Jul, 2016

1 commit

  • 2fbb8462b   autoboot: remove CONFIG_ZERO_BOOTDELAY_CHECK ... Browse Code »

    As the help message of CONFIG_BOOTDELAY says, CONFIG_BOOTDELAY=-2
    means the autoboot with no delay, with no abort check even if
    CONFIG_ZERO_BOOTDELAY_CHECK is defined.

    To sum up, the autoboot behaves as follows:

    [1] CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=y
    autoboot with no delay, but you can abort it by key input

    [2] CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=n
    autoboot with no delay, with no check for abort

    [3] CONFIG_BOOTDELAY=-1
    disable autoboot

    [4] CONFIG_BOOTDELAY=-2
    autoboot with no delay, with no check for abort

    As you notice, [2] and [4] come to the same result, which means we
    do not need CONFIG_ZERO_BOOTDELAY_CHECK. We can control all the
    cases only by CONFIG_BOOTDELAY, like this:

    [1] CONFIG_BOOTDELAY=0
    autoboot with no delay, but you can abort it by key input

    [2] CONFIG_BOOTDELAY=-1
    disable autoboot

    [3] CONFIG_BOOTDELAY=-2
    autoboot with no delay, with no check for abort

    This commit converts the logic as follow:
    CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=n
    --> CONFIG_BOOTDELAY=-2

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Stefan Roese
    Acked-by: Igor Grinberg
    Reviewed-by: Simon Glass
    Acked-by: Vladimir Zapolskiy
    Reviewed-by: Heiko Schocher
    Acked-by: Christian Riesch
    Acked-by: Hannes Schmelzer

    Masahiro Yamada
     

10 Jun, 2016

1 commit

26 Apr, 2016

4 commits

19 Apr, 2016

2 commits

15 Mar, 2016

1 commit

  • 2ac07f75d   arm: Add support for LEGO MINDSTORMS EV3 ... Browse Code »

    This is based on the davinci da850evm. It can boot from either the
    on-board 16MB flash or from a microSD card. It also reads board
    information from an I2C EEPROM.

    The EV3 itself initally boots from write-protected EEPROM, so no
    u-boot SPL is needed.

    Signed-off-by: David Lechner
    Reviewed-by: Tom Rini

    David Lechner