Eric Lee / smarc-uboot

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Nov, 2017

1 commit

31 Oct, 2017

1 commit

  • c0f432c37   configs: vf610: increase maximum size and enforce correct limit ... Browse Code »

    On Vybrid SoCs U-Boot gets loaded into GFX SRAM which is 512KiB.
    Currently 32KiB is reserved for the IMX header. However, this is
    not reflected in the size limit. In v2017.11-rc2 the actual size
    limit (512KiB-32KiB) has been reached for Colibri VF61, which
    lead to a successful build of U-Boot but not a working binary.

    The IMX header is much smaller than 32KiB, typically around 1KiB.
    Decrease the reserved size to 4KiB and specify the correct U-Boot
    size limit. Apply this new base address and limit for all Vybrid
    based boards.

    Signed-off-by: Stefan Agner

    Stefan Agner
     

04 Sep, 2017

4 commits

  • e090579d0   include/configs: remove numerous CONFIG_SYS_BARGSIZE definitions ... Browse Code »

    This commit removes definitions of CONFIG_SYS_BARGSIZE defined to be
    equal to CONFIG_SYS_CBSIZE in numerous configuration files.

    We remove such definitions in two situations:

    - CONFIG_SYS_CBSIZE is otherwise not defined in the board
    configuration file, which means the default value of
    CONFIG_SYS_CBSIZE == 256 applies. In this case, the default value
    of CONFIG_SYS_BARGSIZE == 512 (common/image.c) is suitable, as it is
    larger.

    - CONFIG_SYS_CBSIZE is defined in the board configuration file, but
    to a value equal or less than 512. In this case, the default value
    of CONFIG_SYS_BARGSIZE == 512 (common.image.c) is suitable, as it
    is equal or larger.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini

    Thomas Petazzoni
     
  • 1f20fc53b   include/configs: drop default definitions of CONFIG_SYS_MAXARGS ... Browse Code »

    Now that include/config_fallbacks.h define a sane fallback for
    CONFIG_SYS_MAXARGS, we can drop the definition of this constant in all
    configurations that were using the default value.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini

    Thomas Petazzoni
     
  • 432e39806   include/configs: drop default definitions of CONFIG_SYS_PBSIZE ... Browse Code »
    1

    Now that the fallback value of CONFIG_SYS_PBSIZE in
    include/config_fallbacks.h has been adjusted, remove its definition
    from a large number of board configuration files.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini

    Thomas Petazzoni
     
  • 3784c789e   include/configs: remove CONFIG_SYS_CBSIZE when the default value is used ... Browse Code »

    Now that include/config_fallbacks.h define a sane fallback for
    CONFIG_SYS_CBSIZE, we can drop the definition of this constant in all
    configurations that were using the default value.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini
    [trini: Drop from stih410-b2260.h]
    Signed-off-by: Tom Rini

    Thomas Petazzoni
     

08 Aug, 2017

2 commits

01 Aug, 2017

1 commit

  • 8f1a80e99   configs: Migrate CMD_NAND* ... Browse Code »

    Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS
    CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the
    defconfig files.

    Tested-by: Adam Ford
    Signed-off-by: Tom Rini
    Reviewed-by: Bin Meng

    Tom Rini
     

25 Jul, 2017

1 commit

22 May, 2017

1 commit

07 Apr, 2017

1 commit

  • 01abae4d0   Remove various unused interrupt related code ... Browse Code »

    With d53ecad92f06 some unused interrupt related code was removed.
    However all of these options are currently unused. Rather than migrate
    some of these options to Kconfig we just remove the code in question.

    The only related code changes here are that in some cases we use
    CONFIG_STACKSIZE in non-IRQ related context. In these cases we rename
    and move the value local to the code in question.

    Fixes: d53ecad92f06 ("Merge branch 'master' of git://git.denx.de/u-boot-sunxi")
    Signed-off-by: Tom Rini

    Tom Rini
     

20 Mar, 2017

3 commits

13 Feb, 2017

1 commit

  • e856bdcfb   flash: complete CONFIG_SYS_NO_FLASH move with renaming ... Browse Code »
    20

    We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
    not completed. Finish this work by the tool.

    During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
    Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
    than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will
    make the code more readable. Besides, negative meaning symbols do
    not fit in obj-$(CONFIG_...) style Makefiles.

    This commit was created as follows:

    [1] Edit "default n" to "default y" in the config entry in
    common/Kconfig.

    [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"

    [3] Rename the instances in defconfigs by the following:
    find . -path './configs/*_defconfig' | xargs sed -i \
    -e '/CONFIG_SYS_NO_FLASH=y/d' \
    -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'

    [4] Change the conditionals by the following:
    find . -name '*.[ch]' | xargs sed -i \
    -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
    -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
    -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
    -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'

    [5] Modify the following manually
    - Rename the rest of instances
    - Remove the description from README
    - Create the new Kconfig entry in drivers/mtd/Kconfig
    - Remove the old Kconfig entry from common/Kconfig
    - Remove the garbage comments from include/configs/*.h

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

31 Jan, 2017

1 commit

  • 54925327f   mmc: move CONFIG_GENERIC_MMC to Kconfig ... Browse Code »
    40

    Now, CONFIG_GENERIC_MMC seems equivalent to CONFIG_MMC.

    Let's create an entry for "config GENERIC_MMC" with "default MMC",
    then convert all macro defines in headers to Kconfig. Almost all
    of the defines will go away.

    I see only two exceptions:
    configs/blanche_defconfig
    configs/sandbox_noblk_defconfig

    They define CONFIG_GENERIC_MMC, but not CONFIG_MMC. Something
    might be wrong with these two boards, so should be checked later.

    Anyway, this is the output of the moveconfig tool.

    This commit was created as follows:

    [1] create a config entry in drivers/mmc/Kconfig

    [2] tools/moveconfig.py -r HEAD GENERIC_MMC

    [3] manual clean-up of garbage comments in doc/README.* and
    include/configs/*.h

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Tom Rini

    Masahiro Yamada
     

28 Jan, 2017

1 commit

26 Jan, 2017

1 commit

05 Jan, 2017

1 commit

30 Dec, 2016

1 commit

  • c27269953   mmc: complete unfinished move of CONFIG_MMC ... Browse Code »
    26

    Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
    a Kconfig entry for this option without any actual moves, then
    commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved
    instances only for SUNXI.

    We generally do not like such partial moves. This kind of work
    is automated by tools/moveconfig.py, so it is pretty easy to
    complete this move.

    I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
    This shortens the configs and will ease new board porting.

    This commit was created as follows:

    [1] Edit Kconfig (remove the "depends on", add the "default",
    copy the prompt and help message from Linux)

    [2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     

16 Dec, 2016

1 commit

12 Oct, 2016

2 commits

27 Sep, 2016

1 commit

27 Aug, 2016

1 commit

  • 067716bac   ARM: Move SYS_CACHELINE_SIZE over to Kconfig ... Browse Code »

    This series moves the CONFIG_SYS_CACHELINE_SIZE. First, in nearly all
    cases we are mirroring the values used by the Linux Kernel here. Also,
    so long as (and in this case, it is true) we implement flushes in hunks
    that are no larger than the smallest implementation (and given that we
    mirror the Linux Kernel, again we are fine) it is OK to align higher.
    The biggest changes here are that we always use 64 bytes for CPU_V7 even
    if for example the underlying core is only 32 bytes (this mirrors
    Linux). Second, we say ARM64 uses 64 bytes not 128 (as found in the
    Linux Kernel) as we do not need multi-platform support (to this degree)
    and only the Cavium ThunderX 88xx series has a use for such large
    alignment.

    Cc: Albert Aribaud
    Cc: Marek Vasut
    Cc: Stefano Babic
    Cc: Prafulla Wadaskar
    Cc: Luka Perkov
    Cc: Stefan Roese
    Cc: Nagendra T S
    Cc: Vaibhav Hiremath
    Acked-by: Lokesh Vutla
    Cc: Steve Rae
    Cc: Igor Grinberg
    Cc: Nikita Kiryanov
    Cc: Stefan Agner
    Acked-by: Heiko Schocher
    Cc: Mateusz Kulikowski
    Cc: Peter Griffin
    Acked-by: Paul Kocialkowski
    Cc: Anatolij Gustschin
    Acked-by: "Pali Rohár"
    Cc: Adam Ford
    Cc: Steve Sakoman
    Cc: Grazvydas Ignotas
    Cc: Nishanth Menon
    Cc: Stephen Warren
    Cc: Robert Baldyga
    Cc: Minkyu Kang
    Cc: Thomas Weber
    Cc: Masahiro Yamada
    Cc: David Feng
    Cc: Alison Wang
    Cc: Michal Simek
    Cc: Simon Glass
    Cc: York Sun
    Cc: Shengzhou Liu
    Cc: Mingkai Hu
    Cc: Prabhakar Kushwaha
    Cc: Aneesh Bansal
    Cc: Saksham Jain
    Cc: Qianyu Gong
    Cc: Wang Dongsheng
    Cc: Alex Porosanu
    Cc: Hongbo Zhang
    Cc: tang yuantian
    Cc: Rajesh Bhagat
    Cc: Josh Wu
    Cc: Bo Shen
    Cc: Viresh Kumar
    Cc: Hannes Schmelzer
    Cc: Thomas Chou
    Cc: Joe Hershberger
    Cc: Sam Protsenko
    Cc: Bin Meng
    Cc: Christophe Ricard
    Cc: Anand Moon
    Cc: Beniamino Galvani
    Cc: Carlo Caione
    Cc: huang lin
    Cc: Sjoerd Simons
    Cc: Xu Ziyuan
    Cc: "jk.kernel@gmail.com"
    Cc: "Ariel D'Alessandro"
    Cc: Kever Yang
    Cc: Samuel Egli
    Cc: Chin Liang See
    Cc: Dinh Nguyen
    Cc: Hans de Goede
    Cc: Ian Campbell
    Cc: Siarhei Siamashka
    Cc: Boris Brezillon
    Cc: Andre Przywara
    Cc: Bernhard Nortmann
    Cc: Wolfgang Denk
    Cc: Ben Whitten
    Cc: Tom Warren
    Cc: Alexander Graf
    Cc: Sekhar Nori
    Cc: Vitaly Andrianov
    Cc: "Andrew F. Davis"
    Cc: Murali Karicheri
    Cc: Carlos Hernandez
    Cc: Ladislav Michl
    Cc: Ash Charles
    Cc: Mugunthan V N
    Cc: Daniel Allred
    Cc: Gong Qianyu
    Signed-off-by: Tom Rini
    Acked-by: Masahiro Yamada
    Acked-by: Chin Liang See
    Tested-by: Stephen Warren
    Acked-by: Paul Kocialkowski

    Tom Rini
     

10 Jun, 2016

1 commit

26 Apr, 2016

3 commits

15 Mar, 2016

1 commit

03 Feb, 2016

1 commit

31 Jan, 2016

1 commit

  • 3709844f2   armv7: add cacheline sizes where missing ... Browse Code »

    Some armv7 targets are missing a cache line size declaration.
    In preparation for "arm: cache: Implement cache range check for v7"
    patch, add these declarations with the appropriate value for
    the target's SoC or CPU.

    Signed-off-by: Albert ARIBAUD
    Reviewed-by: Tom Rini

    Albert ARIBAUD
     

21 Jan, 2016

1 commit

25 Nov, 2015

2 commits

30 Oct, 2015

1 commit

25 Oct, 2015

1 commit