29 Feb, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
23 Jan, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
05 Dec, 2019
1 commit
-
Both symbols must be enabled when there is a raw NAND driver
selected. Also enable them when CONFIG_CMD_NAND is selected to avoid
breaking things when we'll further rework the MTD dependency
description.Signed-off-by: Miquel Raynal
Reviewed-by: Boris Brezillon
[trini: Rebase and migrate a few more boards here]
Signed-off-by: Tom Rini
21 Nov, 2019
1 commit
-
- In ARMv8 NXP Layerscape platforms we also need to make use of
CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
ENV_IS_IN_FLASH.
- Migrate all platforms.Cc: Wolfgang Denk
Cc: Joe Hershberger
Cc: Patrick Delaunay
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini
Acked-by: Joe Hershberger
Reviewed-by: Simon Goldschmidt
13 Nov, 2019
1 commit
-
Move this symbol to Kconfig. As part of this we can drop a UBI-specific
symbol that was a stop-gap for not having this particular symbol in
Kconfig.Signed-off-by: Tom Rini
23 Sep, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
26 Aug, 2019
1 commit
-
This converts the following to Kconfig:
CONFIG_ARCH_CPU_INITSigned-off-by: Adam Ford
Acked-by: Chris Packham
Tested-by: Felix Brack
13 Jun, 2019
1 commit
-
Now that various SPI related options depend on CONFIG_DEPRECATED, in
order for platforms to build out of the box they need to disable various
other options.Cc: Albert ARIBAUD
Cc: Marek Vasut
Cc: Vladimir Zapolskiy
Cc: Fabio Estevam
Signed-off-by: Tom Rini
Reviewed-by: Marek Vasut
Reviewed-by: Jagan Teki
18 May, 2019
1 commit
-
CONFIG_SYS_[DI]CACHE_OFF had been partially converted to Kconfig
parameters; only for the ARC architecture. This patch turns these two
parameters into Kconfig items everywhere else they are found.All of the include/configs/* and defconfig changes in this patch are
for arm machines only. The Kconfig changes for arc, nds32, riscv,
and xtensa have been included since these symbols are found in code
under arch/{arc,nds32,riscv,xtensa}, however, no currently-defined
include/configs/* or defconfigs for these architectures exist which
include these symbols.These results have been confirmed with tools/moveconfig.py.
Acked-by: Alexey Brodkin
Signed-off-by: Trevor Woerner
[trini: Re-migrate for a few more boards]
Signed-off-by: Tom Rini
30 Apr, 2019
2 commits
-
Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing
values.Signed-off-by: Simon Goldschmidt
[trini: Re-run migration]
Signed-off-by: Tom Rini -
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
20 Oct, 2018
1 commit
-
The explicit arch specific build symbol allows to group supported
boards, generalize common config options and it will serve as
a dependency for platform only drivers.Two related board defconfigs are resynced after the change.
Signed-off-by: Vladimir Zapolskiy
17 Aug, 2018
1 commit
-
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
2), set this to 8.Signed-off-by: Tom Rini
04 Jun, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
28 Apr, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_SPIThis partly involves updating code that assumes that CONFIG_SPI implies
things that are specific to the MPC8xx SPI driver. For now, just update
the CONFIG tests. This also involves reworking the default for
CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
reasonable default, as it does not cause any compile failures.Signed-off-by: Adam Ford
Signed-off-by: Tom Rini
14 Apr, 2018
1 commit
-
Some boards expect to find more than one phy while other boards are old
and need to be limited to a specific phy address. Only limit the phy
address for boards that opt in.Signed-off-by: Joe Hershberger
Tested-by: Bin Meng
Acked-by: Neil Armstrong
Reviewed-by: Philipp Tomsich
09 Apr, 2018
1 commit
-
Migrate the CONFIG_BOARD_EARLY_INIT_R option to Kconfig.
Signed-off-by: Mario Six
08 Apr, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
14 Feb, 2018
1 commit
-
Signed-off-by: Tuomas Tynkkynen
11 Feb, 2018
1 commit
-
On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
values into the defconfig and removing them from the headers.I did not attempt to add more default values in and for now will leave
that to maintainers.Signed-off-by: Tom Rini
11 Oct, 2017
1 commit
-
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.Signed-off-by: Tuomas Tynkkynen
28 Aug, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
15 Aug, 2017
2 commits
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
-
Also introduce CONFIG_USE_BOOTARGS option so we can control if
CONFIG_BOOTARGS defined at all.Signed-off-by: Sam Protsenko
[trini: Resync r8a779[56]_ulcb, various ls10xx targets]
Signed-off-by: Tom Rini
11 Aug, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_MAX6957Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich
08 Aug, 2017
1 commit
-
Signed-off-by: Alexandru Gagniuc
Acked-by: Joe Hershberger
01 Aug, 2017
1 commit
-
Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS
CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the
defconfig files.Tested-by: Adam Ford
Signed-off-by: Tom Rini
Reviewed-by: Bin Meng
26 Jul, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_MMC
CONFIG_ENV_IS_IN_NAND
CONFIG_ENV_IS_IN_UBI
CONFIG_ENV_IS_NOWHEREIn fact this already exists for sunxi as a 'choice' config. However not
all the choices are available in Kconfig yet so we cannot use that. It
would lead to more than one option being set.In addition, one purpose of this series is to allow the environment to be
stored in more than one place. So the existing choice is converted to a
normal config allowing each option to be set independently.There are not many opportunities for Kconfig updates to reduce the size of
this patch. This was tested with./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC
And then manual updates. This is because for CHAIN_OF_TRUST boards they
can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
now.Signed-off-by: Simon Glass
Signed-off-by: Tom Rini
23 May, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_HD44760Also drop CONFIG_CMD_HD44780 which appears to be a typo.
Signed-off-by: Simon Glass
22 May, 2017
2 commits
-
This converts the following to Kconfig:
CONFIG_CMD_EEPROM
CONFIG_CMD_EEPROM_LAYOUT
CONFIG_EEPROM_LAYOUT_HELP_STRINGSigned-off-by: Simon Glass
Reviewed-by: Tom Rini
[trini: Rework Kconfig logic slightly, define EEPROM location on TI eval
platforms]
Signed-off-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_SPL_BOARD_INITSigned-off-by: Ley Foon Tan
[trini: Update the Kconfig logic]
Signed-off-by: Tom Rini
01 May, 2017
1 commit
-
Signed-off-by: Chris Packham
[trini: default y if DM_RTC, re-sync]
Signed-off-by: Tom Rini
14 Mar, 2017
1 commit
-
Signed-off-by: Tom Rini
28 Jan, 2017
1 commit
-
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay
26 Jan, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_BOARD_EARLY_INIT_FSigned-off-by: Simon Glass
30 Dec, 2016
1 commit
-
Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
a Kconfig entry for this option without any actual moves, then
commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved
instances only for SUNXI.We generally do not like such partial moves. This kind of work
is automated by tools/moveconfig.py, so it is pretty easy to
complete this move.I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
This shortens the configs and will ease new board porting.This commit was created as follows:
[1] Edit Kconfig (remove the "depends on", add the "default",
copy the prompt and help message from Linux)[2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'
Signed-off-by: Masahiro Yamada
Reviewed-by: Jaehoon Chung
12 Oct, 2016
1 commit
-
Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default
in certain architectures. Migrate all config files.Signed-off-by: Lokesh Vutla
Signed-off-by: Tom Rini
17 Sep, 2016
3 commits
-
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
-
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
-
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass