23 May, 2017
1 commit
-
trini: Make Kconfig SPL_xxx entires only show if SPL, so that we don't
get Kconfig errors on platforms without SPL, ie sandbox (without SPL).Signed-off-by: Tom Rini
22 May, 2017
2 commits
-
Commit 94e3c8c4fd7b ("crypto/fsl - Add progressive hashing support
using hardware acceleration.") created entries for CONFIG_SHA1,
CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and CONFIG_SHA_PROG_HW_ACCEL.
However, no defconfig has migrated to it. Complete the move by first
adding additional logic to various Kconfig files to select this when
required and then use the moveconfig tool. In many cases we can select
these because they are required to implement other drivers. We also
correct how we include the various hashing algorithms in SPL.This commit was generated as follows (after Kconfig additions):
[1] tools/moveconfig.py -y SHA1 SHA256 SHA_HW_ACCEL
[2] tools/moveconfig.py -y SHA_PROG_HW_ACCELNote:
We cannot move SHA_HW_ACCEL and SHA_PROG_HW_ACCEL simultaneously
because there is dependency between them.Cc: Poonam Aggrwal
Cc: Naveen Burmi
Cc: Po Liu
Cc: Shengzhou Liu
Cc: Priyanka Jain
Cc: Shaohui Xie
Cc: Chunhe Lan
Cc: Chander Kashyap
Cc: Steve Rae
Cc: Dirk Eibach
Cc: Feng Li
Cc: Alison Wang
Cc: Sumit Garg
Cc: Mingkai Hu
Cc: York Sun
Cc: Prabhakar Kushwaha
Cc: Jaehoon Chung
Cc: Akshay Saraswat
Cc: Heiko Schocher
Cc: Jagan Teki
Signed-off-by: Tom Rini
Reviewed-by: Simon Glass
Signed-off-by: Tom Rini -
We rename CONFIG_FIT_DISABLE_SHA256 to CONFIG_FIT_ENABLE_SHA256_SUPPORT which
is enabled by default and now a positive option. Convert the handful of boards
that were disabling it before to save space.Cc: Dirk Eibach
Cc: Lukasz Dalek
Signed-off-by: Tom Rini
Reviewed-by: Simon Glass
Reviewed-by: Simon Glass
18 May, 2017
3 commits
-
The Allwinner SoCs with 64-bit cores use an ARM Trusted Firmware binary,
which needs to be loaded alongside U-Boot proper.
Set the respective Kconfig options to let them select this feature and
also automatically build the FIT image.Signed-off-by: Andre Przywara
Acked-by: Maxime Ripard
[Rename Kconfig path to arch/arm/mach-sunxi/Kconfig]
Signed-off-by: Jagan Teki
Reviewed-by: Jagan Teki -
Some platforms require more complex U-Boot images than we can easily
generate via the mkimage command line, for instance to load additional
image files.
Introduce a CONFIG_SPL_FIT_SOURCE and CONFIG_SPL_FIT_GENERATOR symbol,
which can either hold an .its source file describing the image layout,
or, in the second case, a generator tool (script) to create such
a source file. This script gets passed the list of device tree files
from the CONFIG_OF_LIST variable.
A platform or board can define either of those in their defconfig file
to allow an easy building of such an image.Signed-off-by: Andre Przywara
Reviewed-by: Jagan Teki -
SPL_FIT obviously requires libfdt in SPL, so let Kconfig express that by
selecting SPL_OF_LIBFDT.
Also make the actual options that users want (SPL signature and SPL FIT
loading) visible in the menu and let them select the SPL_FIT as a
requirement.
Also remove the now redundant SPL_OF_LIBFDT from those Kconfigs that had
it in for the SPL FIT loading feature.Signed-off-by: Andre Przywara
Reviewed-by: Simon Glass
[Remove change from configs/evb-rk3399_defconfig]
Signed-off-by: Jagan Teki
09 Apr, 2017
1 commit
-
This patch makes SYS_TEXT_BASE a config option for Keystone2
so that it can be used to load u-boot at different addresses
on secure and non-secure Keystone2 devices.Signed-off-by: Madan Srinivas
Signed-off-by: Andrew F. Davis
Reviewed-by: Tom Rini
Reviewed-by: Lokesh Vutla
06 Apr, 2017
1 commit
-
The SPARC architecture is currently unmaintained, remove.
Cc: Francois Retief
Signed-off-by: Tom Rini
17 Mar, 2017
1 commit
-
FIT images require MD5 support to verify image checksums. So far this
was expressed by defining a CPP symbol in image.h. Since MD5 is now a
first class Kconfig citizen, express that in Kconfig instead.Signed-off-by: Andre Przywara
Reviewed-by: Simon Glass
09 Feb, 2017
2 commits
-
Add kconfig file to enable API support
Signed-off-by: Emmanuel Vadot
Reviewed-by: Tom Rini
Reviewed-by: Simon Glass -
This feature is inspired by /proc/config.gz of Linux. In Linux,
if CONFIG_IKCONFIG is enabled, the ".config" file contents are
embedded in the kernel image. If CONFIG_IKCONFIG_PROC is also
enabled, the ".config" contents are exposed to /proc/config.gz.
Users can do "zcat /proc/config.gz" to check which config options
are enabled on the running kernel image.The idea is almost the same here; if CONFIG_CMD_CONFIG is enabled,
the ".config" contents are compressed and saved in the U-Boot image,
then printed by the new command "config".The usage is quite simple. Enable CONFIG_CMD_CONFIG, then run
> config
from the command line interface. The ".config" contents will be
printed on the console.This feature increases the U-Boot image size by about 4KB (this is
mostly due to the gzip-compressed .config file). By default, it is
enabled only for Sandbox because we do not care about the memory
footprint on it. Of course, this feature is architecture agnostic,
so you can enable it on any board if the image size increase is
acceptable for you.Signed-off-by: Masahiro Yamada
Reviewed-by: Simon Glass
28 Jan, 2017
2 commits
-
We convert CONFIG_PARTITION_UUIDS to Kconfig first. But in order to cleanly
update all of the config files we must also update CMD_PART and CMD_GPT to also
be in Kconfig in order to avoid complex logic elsewhere to update all of the
config files.Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay
Signed-off-by: Tom Rini -
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay
21 Jan, 2017
1 commit
-
Use the generic "distro" boot framework to enable automatic DHCP boot.
MMC and USB are not yet implemented, so this is the only boot option.The fdt and kernel addresses are adopted from downstream; ramdisk and
scriptaddr addresses were chosen arbitrarily.Signed-off-by: Andreas Färber
Reviewed-by: Alexander Graf
15 Jan, 2017
1 commit
-
Some refactoring of the top-level Kconfig file which includes:
* using "if" to remove numerous identical dependency tests
* reordering config entries to group related ones
* spelling and grammar fixesThere should be no functional changes, only aesthetic ones.
Signed-off-by: Robert P. J. Day
12 Jan, 2017
1 commit
-
This enables suitable commands needed for booting general purpose
Linux distribution. This is required for example if we want to use PXE
or DHCP as default boot targets, symbols no longer enabled by
config_distro_defaults.h .Signed-off-by: Romain Perier
10 Jan, 2017
1 commit
-
Enable CONFIG_SYS_TEXT_BASE via Kconfig.
Signed-off-by: Michal Simek
04 Dec, 2016
3 commits
-
Currently, CMD_PXE is forcibly enabled in config_distro_defaults.h, so
that general purpose distributions can rely on it being defined. This
header is included, under conditions or not, by various archs or
famillies of archs / SoCs.However, it is very possible that boards based on those SoCs will not
have a physical ethernet connector at all, even if the have a MAC; for
example, the Nanopi Neo AIR (sunxi H3) does not. It is also possible
that network booting is absolutely not necessary for a device.However, it is not possible to disable the PXE command, as it is
forcibly enabled and is non-configurable.But it turns out we already have a config option to build a distro-ready
image, in the name of DISTRO_DEFAULTS.Move CMD_PXE out of the hard-coded config_distro_defaults.h into a
Kconfig option, that gets selected by DISTRO_DEFAULTS when it is set.Signed-off-by: "Yann E. MORIN"
Cc: Joe Hershberger
[trini: Make it select MENU, run moveconfig.py]
Signed-off-by: Tom Rini -
A number of platforms had been using the distro default feature before
it was moved to Kconfig but did not enable the new Kconfig option when
it was enabled. This caused a regression in terms of features and this
introduces breakage when more things move to Kconfig.Signed-off-by: Tom Rini
03 Dec, 2016
1 commit
-
Commit e2f88dfd2d96 ("libfdt: Introduce new ARCH_FIXUP_FDT option")
allows us to skip memory setup of DTB, but a problem for ARM is that
spin_table_update_dt() and psci_update_dt() are skipped as well if
CONFIG_ARCH_FIXUP_FDT is disabled.This commit allows us to skip only fdt_fixup_memory_banks() instead
of the whole of arch_fixup_fdt(). It will be useful when we want to
use a memory node from a kernel DTB as is, but need some fixups for
Spin-Table/PSCI.Signed-off-by: Masahiro Yamada
Acked-by: Alexey Brodkin
Acked-by: Simon Glass
Fixed build error for x86:
Signed-off-by: Simon Glass
29 Nov, 2016
1 commit
-
The DFU Kconfig menu entries should be part of the SPL
Kconfig file. Also avoid using the top level Makefile by
moving the config dependent build artifacts to the driver/
and driver/usb/gadget/ Makfiles.With that, DFU can be built again in SPL if
CONFIG_SPL_DFU_SUPPORT is enabled.Fixes: 6ad6102246d8 ("usb:gadget: Disallow DFU in SPL for now")
Signed-off-by: Stefan Agner
Reviewed-by: Simon Glass
Acked-by: Lukasz Majewski
17 Nov, 2016
1 commit
-
Most new systems in U-Boot these days make use of the generic "distro"
framework which allows a user to have U-Boot scan for a bootable OS
on all available media types.This patch extends the LS2080ARDB board to use that framework if the
hard coded NOR flash location does not contain a bootable image.Signed-off-by: Alexander Graf
28 Sep, 2016
1 commit
-
Traditionally the DFU support is available only
as part 2nd stage boot loader(u-boot) and DFU
is not supported in SPL.The SPL-DFU feature is useful for boards which
does not have MMC/SD, ethernet boot mechanism
to boot the board and only has USB inteface.This patch add DFU support in SPL with RAM
memory device support to load and execute u-boot.
And then leverage full functionality DFU in
u-boot to flash boot inital binary images to
factory or bare-metal boards to memory devices
like SPI, eMMC, MMC/SD card using USB interface.This SPL-DFU support can be enabled through
Menuconfig->Boot Images->Enable SPL-DFU supportSigned-off-by: Ravi Babu
Reviewed-by: Tom Rini
20 Sep, 2016
1 commit
-
This reverts commit 90c08d9e08c7a108ab904f3bbdeb558081757892.
I took a closer look at this after the commit was applied, and found
CONFIG_SYS_MALLOC_F_LEN=0x2000 was too much. 8KB memory for SPL is
actually too big for some boards. Perhaps 0x800 is enough, but the
situation varies board by board.Let's postpone our decision until we come up with a better idea.
Signed-off-by: Masahiro Yamada
Reviewed-by: Simon Glass
17 Sep, 2016
1 commit
-
Move the SPL settings into common/spl where most of the SPL code is kept.
Signed-off-by: Simon Glass
07 Sep, 2016
1 commit
-
If both SPL_DM and SPL_OF_CONTROL are enabled, SPL needs to bind
several devices, but CONFIG_SYS_MALLOC_F_LEN=0x400 is apparently
not enough. Increase the default to 0x2000 for the case. This
will be helpful for shorter defconfigs.Signed-off-by: Masahiro Yamada
Reviewed-by: Stefan Roese
Reviewed-by: Simon Glass
20 Aug, 2016
2 commits
-
The 'bootz' command is really only for ARM32 Linux Kernel 'zImage' files
but has also been adapted for testing with sandbox. Given that sandbox
is a test platform, don't add that logic under DISTRO_DEFAULTS.Cc: Hans de Goede
Signed-off-by: Tom Rini -
This command is used to boot ARM64 Linux.
I made DISTRO_DEFAULTS select this option for ARM64 to respect
include/config_distro_defaults.h.Signed-off-by: Masahiro Yamada
Signed-off-by: Tom Rini
12 Aug, 2016
1 commit
-
This commit allows injecting a board/platform/device-specific post-
processing function into the FIT image data loading process, which can
include modifying the size and altering the starting source address of
an image data artifact. This might be desired to do things like strip
headers or footers attached to the images before they were packaged into
the FIT, or to perform operations such as decryption or authentication.
Introduce new configuration option CONFIG_FIT_IMAGE_POST_PROCESS to
allow controlling this feature. If enabled, a platform-specific post-
process function must be provided.Signed-off-by: Andreas Dannenberg
Reviewed-by: Tom Rini
Reviewed-by: Simon Glass
05 Aug, 2016
1 commit
-
We need to ensure that CONFIG_PHYS_64BIT is configured via Kconfig so
that it is always available to the build system. Otherwise we can run
into cases where we have inconsistent sizes of certain attributes.Ravi Babu reported offset mismatch of struct dwc3 across files since
commit 95ebc253e6d4 ("types.h: move and redefine resource_size_t").
Since the commit, resource_addr_t points to phys_addr_t, whose size
is dependent on CONFIG_PHYS_64BIT for ARM architecture.I tried my best to use "select" where possible (for example, ARMv8
architecture) because I think this kind of option is generally user-
unconfigurable. However, I see some of PowerPC boards have 36BIT
defconfigs as well as 32BIT ones. I moved CONFIG_PHYS_64BIT to the
defconfigs for such boards.CONFIG_36BIT is no longer referenced, so all of the defines were
removed from CONFIG_SYS_EXTRA_OPTIONS.Fixes: 95ebc253e6d4 ("types.h: move and redefine resource_size_t")
Signed-off-by: Masahiro Yamada
Reported-by: Ravi Babu
Acked-by: Stefan Roese
Reviewed-by: Tom Rini
Reviewed-by: York Sun
01 Aug, 2016
1 commit
-
Add new Kconfig option to disable arch_fixup_fdt() calls for cases where
U-Boot shouldn't update memory setup in DTB file.
One example of usage of this option is to boot OS with different memory
setup than U-Boot use.Signed-off-by: Michal Simek
Acked-by: Simon Glass
15 Jul, 2016
2 commits
-
Sometimes it is useful to build tools with debugging information included so
that line-number information is available when run under gdb. Add a Kconfig
option to support this.Signed-off-by: Simon Glass
Reviewed-by: Tom Rini -
The next stage boot loader image and the selected FDT can be post-
processed by board/platform/device-specific code, which can include
modifying the size and altering the starting source address before
copying these binary blobs to their final destination. This might be
desired to do things like strip headers or footers attached to the
images before they were packaged into the FIT, or to perform operations
such as decryption or authentication. Introduce new configuration
option CONFIG_SPL_FIT_IMAGE_POST_PROCESS to allow controlling this
feature. If enabled, a platform-specific post-process function must
be provided.Signed-off-by: Daniel Allred
Signed-off-by: Andreas Dannenberg
Reviewed-by: Tom Rini
Reviewed-by: Simon Glass
21 Jun, 2016
1 commit
-
DISTRO_DEFAULTS is intended to mirror / replace
include/config_distro_defaults.h.The intend is for boards which include this file to select this from
their Kconfig files and when moving setting to Kconfig which are #define-ed
in config_distro_defaults.h to select this from DISTRO_DEFAULTS so that
boards which have selected DISTRO_DEFAULTS will keep the same configuration
as before without needing any defconfig file changes.The initial list of selected things matches all settings recently removed
from config_distro_defaults.h because they have been converted to Kconfig,
with the exception of CMD_ELF and CMD_NET, which have a default of y, if
the default of these ever changes they should be selected by DISTRO_DEFAULTS
too.For testing and example purposes this commit also converts ARCH_SUNXI
to use DISTRO_DEFAULT instead of selecting everything it needs itself.Signed-off-by: Hans de Goede
13 Jun, 2016
1 commit
-
This allows a board to configure verified boot within the SPL using
a FIT or FIT with external data. It also allows the SPL to perform
signature verification without needing relocation.The board configuration will need to add the following feature defines:
CONFIG_SPL_CRYPTO_SUPPORT
CONFIG_SPL_HASH_SUPPORT
CONFIG_SPL_SHA256In this example, SHA256 is the only selected hashing algorithm.
And the following booleans:
CONFIG_SPL=y
CONFIG_SPL_DM=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_SPL_OF_LIBFDT=y
CONFIG_SPL_FIT_SIGNATURE=ySigned-off-by: Teddy Reed
Acked-by: Simon Glass
Acked-by: Andreas Dannenberg
Acked-by: Sumit Garg
26 May, 2016
1 commit
-
Move CONFIG_SYS_TEXT_BASE to Kconfig, and add default values in board
Kconfig files matching what was present in their config headers. This
will make it cleaner to conditionalise the value for Malta based on 32
vs 64 bit builds.Signed-off-by: Paul Burton
19 Apr, 2016
1 commit
-
Signed-off-by: Robert P. J. Day
15 Mar, 2016
2 commits
-
This provides a way to load a FIT containing U-Boot and a selection of device
tree files. The board can select the correct device tree by probing the
hardware. Then U-Boot is started with the selected device tree.Signed-off-by: Simon Glass
-
There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.Move these options to Kconfig and tidy up board configuration:
CONFIG_FIT
CONFIG_OF_BOARD_SETUP
CONFIG_OF_SYSTEM_SETUP
CONFIG_FIT_SIGNATURE
CONFIG_FIT_BEST_MATCH
CONFIG_FIT_VERBOSE
CONFIG_OF_STDOUT_VIA_ALIAS
CONFIG_RSAUnfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.Note: Masahiro's moveconfig.py script is amazing.
Signed-off-by: Simon Glass
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: Tom Rini