29 Feb, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
10 Feb, 2020
5 commits
-
Drop PPD_UART_PAD_CTRL since it matches defaults.
Enable DM serial and MXC uart.Signed-off-by: Ian Ray
Signed-off-by: Robert Beckett -
Remove legacy iomux setup for fec.
Enable phylib and DM fec.
Use Kconfig for enabling fec.Signed-off-by: Robert Beckett
-
Enable DM_VIDEO for mx53ppd.
Enable DM_REGULATOR_FIXED and DM_PWM for the backlight.
Remove unused MX53PPD_LCD_POWER.
Remove old (incorrect) setup_iomux_lcd.
Enable backlight via display enable handler.
Use cls command to initiate display in HW agnostic manner.
Modify `failbootcmd' to use lcdputs.Signed-off-by: Ian Ray
Signed-off-by: Robert Beckett -
Add bootcount node, linking to i2c eeprom "bootcount" partitions for
storage.
Enable i2c eeprom bootcount backend storage.
Enable bootcount command and use it for failbootcmd.Signed-off-by: Robert Beckett
-
Remove old (pre-DM) i2c setup code.
Enable DM i2c.
Convert common code to use DM rtc.
Convert common code to read VPD from eeprom partition.
Convert the generic i2c PMIC init code to use the new da9063 driver.mx53ppd only:
Correct RTC compatible in device tree.
Enable MXC DM i2c driver.
Define CONFIG_SYS_MALLOC_F_LEN so that DM is available in pre-reloc.
Make GPIO banks available during preloc, since initialisation is done
in board_early_init_f().
Add gpio_request() calls to satisfy the DM_GPIO compatibility API.
Remove unused power configuration.Signed-off-by: Robert Beckett
Signed-off-by: Ian Ray
07 Feb, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
23 Jan, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
07 Jan, 2020
2 commits
-
Enable DM imx WDT
Enable SYSRESET_WATCHDOG to maintain WDT based reset abilitySigned-off-by: Robert Beckett
-
DM should be used for USB since 2019.07, it also requires DM for
regulators.Signed-off-by: Denis Zalevskiy
Signed-off-by: Robert Beckett
04 Dec, 2019
1 commit
-
Like in Linux, just use CONFIG_MTD to compile the MTD stack.
Signed-off-by: Miquel Raynal
Reviewed-by: Boris Brezillon
21 Nov, 2019
2 commits
-
- In ARMv8 NXP Layerscape platforms we also need to make use of
CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
ENV_IS_IN_FLASH.
- Migrate all platforms.Cc: Wolfgang Denk
Cc: Joe Hershberger
Cc: Patrick Delaunay
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini
Acked-by: Joe Hershberger
Reviewed-by: Simon Goldschmidt -
Today in initr_reloc_global_data() we use some non-obvious tests to
determine if we need to relocate the env_addr within gd or not. In
order to facilitate migration of other symbols to Kconfig we need to
introduce a new symbol for this particular use case.Cc: Wolfgang Denk
Cc: Joe Hershberger
Signed-off-by: Tom Rini
08 Oct, 2019
1 commit
-
move WATCHDOG_TIMEOUT_MSECS to Kconfig and fix
all board defconfigs.Signed-off-by: Heiko Schocher
Reviewed-by: Stefan Roese
Acked-by: Lukasz Majewski
Acked-by: Martyn Welch
Signed-off-by: Stefan Roese
20 Jul, 2019
1 commit
-
add Kconfig support for this driver.
Signed-off-by: Heiko Schocher
Acked-by: Martyn Welch
23 Jun, 2019
1 commit
-
Converted to use fsl_esdhc_imx for i.MX platforms.
Signed-off-by: Yangbo Lu
Tested-by: Steffen Dirkwinkel
Reviewed-by: Peng Fan
Reviewed-by: Lukasz Majewski
Reviewed-by: Martyn Welch
Acked-by: Jason Liu
27 May, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
01 May, 2019
1 commit
-
Porting to DM and i.MX8
------------------------- warp7 to DM
- kp_imx53 to DM
- Warnings in DT
- MX8QM support
- colibri-imx6ull to DM
- imx7d-pico to DM
- ocotp for MX8
30 Apr, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
25 Apr, 2019
1 commit
-
This converts the following to Kconfig:
CONFIG_USB_EHCI_MX5Signed-off-by: Lukasz Majewski
14 Apr, 2019
4 commits
-
Signed-off-by: Anatolij Gustschin
-
Add board-specific FDT function to store U-Boot version in device tree.
Signed-off-by: Ian Ray
-
Use MMC device model, and remove USDHC pin configuration code since the
pinctrl driver is used.Signed-off-by: Ian Ray
-
Add simplified, generalised, ppd device tree and enable CONFIG_DM.
Signed-off-by: Ian Ray
08 Jan, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
17 Dec, 2018
1 commit
-
Use standard configuration logic to define EEPROM constants.
Names are based on VPD_EEPROM_ prefix because EEPROM_ is already
used by i2c_eeprom driver.Signed-off-by: Denis Zalevskiy
Signed-off-by: Fabien Lahoudere
22 Oct, 2018
1 commit
-
Move this option to Kconfig and tidy up the config file of eight
boards which use it.Signed-off-by: Xiaoliang Yang
18 Aug, 2018
3 commits
-
This converts the following to Kconfig:
CONFIG_MISC_INIT_RSigned-off-by: Adam Ford
[trini: Update the defaults logic slightly]
Signed-off-by: Tom Rini -
Migrate boards which set bootlimit in the environment to Kconfig.
We exclude gurnard_defconfig which includes a bootlimit=, but doesn't set
CONFIG_BOOTCOUNT_LIMIT, so we'd fail to include a bootlimit setting
if we migrated it.display5_defconfig and display5_factory_defconfig share a SYS_CONFIG_NAME,
but only display5_defconfig enables CONFIG_BOOTCOUNT_LIMIT, so we fail to
set bootlimit= in display5_factory_defconfig. This is okay because the
display5_factory_defconfig doesn't need to have it set, as it is only
meant to prepare the board in the factory.Environment changes for all modified configs as seen from buildman:
boards.cfg is up to date. Nothing to do.
Summary of 3 commits for 32 boards (8 threads, 1 job per thread)
01: Merge git://git.denx.de/u-boot-x86
arm: + draco etamin rastaban pxm2 display5 thuban rut
02: Add BOOTCOUNT_BOOTLIMIT to set reboot limit
03: Migrate bootlimit to Kconfig
- display5_factory: bootlimit=3Signed-off-by: Alex Kiernan
Reviewed-by: Lukasz Majewski -
This converts the following to Kconfig:
CONFIG_MII
CONFIG_DRIVER_TI_EMACSigned-off-by: Adam Ford
Acked-by: Jagan Teki
Acked-by: Joe Hershberger
17 Aug, 2018
1 commit
-
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
2), set this to 8.Signed-off-by: Tom Rini
17 May, 2018
1 commit
-
CONFIG_ENV_IS_IN_MMC must be declared in defconfig to properly
support "env save".Signed-off-by: Sebastian Reichel
09 Apr, 2018
1 commit
-
Migrate the CONFIG_FSL_ESDHC option to Kconfig.
Signed-off-by: Mario Six
26 Feb, 2018
1 commit
-
Migrate the users of CONFIG_SYS_BOOTCOUNT_ADDR to Kconfig. We can
provide a default for BOOTCOUNT_AM33XX as that's a specific part of the
RTC in use. We can also provide a default for ARCH_LS1043A and
ARCH_LS1021A as they had been previously calculated and their symbols
are in Kconfig. In the case of other QE-enabled platforms, they are not
so we must update the relevant defconfig files. The previous default
only applied in some cases, even on a specific SoC family.Reviewed-by: Lukasz Majewski
Reviewed-by: Alex Kiernan
Signed-off-by: Tom Rini
24 Feb, 2018
2 commits
-
CONFIG_BOOTCOUNT was only used in mx53ppd, merge it with
CONFIG_BOOTCOUNT_LIMITSigned-off-by: Alex Kiernan
Reviewed-by: Lukasz Majewski
Reviewed-by: Ian Ray -
This converts the following to Kconfig:
CONFIG_BOOTP_BOOTPATH
CONFIG_BOOTP_DNS
CONFIG_BOOTP_GATEWAY
CONFIG_BOOTP_HOSTNAME
CONFIG_BOOTP_PXE
CONFIG_BOOTP_SUBNETMASK
CONFIG_CMDLINE_EDITING
CONFIG_AUTO_COMPLETE
CONFIG_SYS_LONGHELP
CONFIG_SUPPORT_RAW_INITRD
CONFIG_ENV_VARS_UBOOT_CONFIGSigned-off-by: Adam Ford
[trini: Re-run the migration]
Signed-off-by: Tom Rini
15 Feb, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_BOOTCOUNT_LIMITSigned-off-by: Lukasz Majewski
Tested-by: Alex Kiernan
Reviewed-by: Hannes Schmelzer
Acked-by: Hannes Schmelzer
11 Feb, 2018
1 commit
-
On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
values into the defconfig and removing them from the headers.I did not attempt to add more default values in and for now will leave
that to maintainers.Signed-off-by: Tom Rini
19 Dec, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
20 Nov, 2017
1 commit
-
Create board support for GE PPD, based on mx53loco.
Use mx53ppd_defconfig make target to configure for this board.
Signed-off-by: Peter Senna Tschudin
Signed-off-by: Ian Ray
Signed-off-by: Nandor Han
Signed-off-by: Martyn Welch
Cc: Stefano Babic
Acked-by: Stefano Babic