Eric Lee / smarc-uboot

18 Jan, 2020

1 commit

12 Aug, 2019

1 commit

07 May, 2018

1 commit

  • 83d290c56   SPDX: Convert all of our single license tags to Linux Kernel style ... Browse Code »
    56

    When U-Boot started using SPDX tags we were among the early adopters and
    there weren't a lot of other examples to borrow from. So we picked the
    area of the file that usually had a full license text and replaced it
    with an appropriate SPDX-License-Identifier: entry. Since then, the
    Linux Kernel has adopted SPDX tags and they place it as the very first
    line in a file (except where shebangs are used, then it's second line)
    and with slightly different comment styles than us.

    In part due to community overlap, in part due to better tag visibility
    and in part for other minor reasons, switch over to that style.

    This commit changes all instances where we have a single declared
    license in the tag as both the before and after are identical in tag
    contents. There's also a few places where I found we did not have a tag
    and have introduced one.

    Signed-off-by: Tom Rini

    Tom Rini
     

16 Aug, 2017

1 commit

  • 00caae6d4   env: Rename getenv/_f() to env_get() ... Browse Code »

    We are now using an env_ prefix for environment functions. Rename these
    two functions for consistency. Also add function comments in common.h.

    Quite a few places use getenv() in a condition context, provoking a
    warning from checkpatch. These are fixed up in this patch also.

    Suggested-by: Wolfgang Denk
    Signed-off-by: Simon Glass

    Simon Glass
     

13 Apr, 2017

1 commit

06 Apr, 2017

2 commits

22 Jan, 2017

1 commit

  • 2d8d190c8   status_led: Kconfig migration ... Browse Code »
    14

    Move all of the status LED feature to drivers/led/Kconfig.
    The LED status definitions were moved from the board configuration
    files to the defconfig files.

    TBD: Move all of the definitions in the include/status_led.h to the
    relevant board's defconfig files.

    Tested boards: CL-SOM-AM57x, CM-T335

    Signed-off-by: Uri Mashiach

    Uri Mashiach
     

12 Sep, 2015

2 commits

24 Apr, 2015

1 commit

19 Apr, 2015

1 commit

  • d2eaec600   net: Remove the bd* parameter from net stack functions ... Browse Code »

    This value is not used by the network stack and is available in the
    global data, so stop passing it around. For the one legacy function
    that still expects it (init op on old Ethernet drivers) pass in the
    global pointer version directly to avoid changing that interface.

    Signed-off-by: Joe Hershberger
    Reported-by: Simon Glass
    Reviewed-by: Simon Glass
    Signed-off-by: Simon Glass
    (Trival fix to remove an unneeded variable declaration in 4xx_enet.c)

    Joe Hershberger
     

21 Feb, 2015

1 commit

  • 4614b8913   ARM: at91: move board select menu and common settings ... Browse Code »

    The board select menu in arch/arm/Kconfig is still big.
    To slim down it, this commit moves AT91 boards to
    arch/arm/mach-at91/Kconfig.
    Also, consolidate "config SYS_SOC" in each board Kconfig.

    The Kconfig files under board/ directory were modified with the
    following command:

    find board -name Kconfig | xargs sed -i -e '
    /config SYS_SOC/ {
    N
    /default "at91"/ {
    N
    d
    }
    }
    '

    Signed-off-by: Masahiro Yamada
    Acked-by: Andreas Bießmann

    Masahiro Yamada
     

30 Jan, 2015

1 commit

  • 49cad5478   Export redesign ... Browse Code »

    this is an atempt to make the export of functions typesafe.
    I replaced the jumptable void ** by a struct (jt_funcs) with function pointers.
    The EXPORT_FUNC macro now has 3 fixed parameters and one
    variadic parameter
    The first is the name of the exported function,
    the rest of the parameters are used to format a functionpointer
    in the jumptable,

    the EXPORT_FUNC macros are expanded three times,
    1. to declare the members of the struct
    2. to initialize the structmember pointers
    3. to call the functions in stubs.c

    Signed-off-by: Martin Dorwig
    Acked-by: Simon Glass

    Signed-off-by: Simon Glass
    (resending to the list since my tweaks are not quite trivial)

    Martin Dorwig
     

29 Oct, 2014

1 commit

  • 2e07c249a   kconfig: arm: introduce symbol for ARM CPUs ... Browse Code »
    215

    This commit introduces a Kconfig symbol for each ARM CPU:
    CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136,
    CPU_ARM1176, CPU_V7, CPU_PXA, CPU_SA1100.
    Also, it adds the CPU feature Kconfig symbol HAS_VBAR which is selected
    for CPU_ARM1176 and CPU_V7.

    For each target, the corresponding CPU is selected and the definition of
    SYS_CPU in the corresponding Kconfig file is removed.

    Also, it removes redundant "string" type in some Kconfig files.

    Signed-off-by: Georges Savoundararadj
    Acked-by: Albert ARIBAUD
    Cc: Masahiro Yamada

    Georges Savoundararadj
     

14 Sep, 2014

1 commit

  • 461be2f96   kconfig: remove redundant "string" type in arch and board Kconfigs ... Browse Code »
    43

    Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}
    are specified in arch/Kconfig.

    We can delete the ones in arch and board Kconfig files.

    This commit can be easily reproduced by the following command:

    find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '
    /config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ {
    N
    s/\n[[:space:]]*string//
    }
    '

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

30 Jul, 2014

2 commits

  • 93d4334f7   Add board MAINTAINERS files ... Browse Code »

    We have switched to Kconfig and the boards.cfg file is going to
    be removed. We have to retrieve the board status and maintainers
    information from it.

    The MAINTAINERS format as in Linux Kernel would be nice
    because we can crib the scripts/get_maintainer.pl script.

    After some discussion, we chose to put a MAINTAINERS file under each
    board directory, not the top-level one because we want to collect
    relevant information for a board into a single place.

    TODO:
    Modify get_maintainer.pl to scan multiple MAINTAINERS files.

    Signed-off-by: Masahiro Yamada
    Suggested-by: Tom Rini
    Acked-by: Simon Glass

    Masahiro Yamada
     
  • dd84058d2   kconfig: add board Kconfig and defconfig files ... Browse Code »

    This commit adds:
    - arch/${ARCH}/Kconfig
    provide a menu to select target boards
    - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
    - configs/${TARGET_BOARD}_defconfig
    default setting of each board

    (This commit was automatically generated by a conversion script
    based on boards.cfg)

    In Linux Kernel, defconfig files are located under
    arch/${ARCH}/configs/ directory.
    It works in Linux Kernel since ARCH is always given from the
    command line for cross compile.

    But in U-Boot, ARCH is not given from the command line.
    Which means we cannot know ARCH until the board configuration is done.
    That is why all the "*_defconfig" files should be gathered into a
    single directory ./configs/.

    Signed-off-by: Masahiro Yamada
    Acked-by: Simon Glass

    Masahiro Yamada
     

05 Mar, 2014

1 commit

  • 1ace40223   sizes.h - consolidate for all architectures ... Browse Code »

    Copied from Linux sources "include/linux/sizes.h" commit
    413541dd66d51f791a0b169d9b9014e4f56be13c

    Signed-off-by: Alexey Brodkin

    Cc: Vineet Gupta
    Cc: Tom Rini
    Cc: Stefan Roese
    Cc: Albert Aribaud
    Acked-by: Tom Rini
    Acked-by: Stefan Roese
    [trini: Add bcm Kona platforms to the patch]
    Signed-off-by: Tom Rini

    Alexey Brodkin
     

09 Dec, 2013

1 commit

02 Dec, 2013

1 commit

  • 4535a24c0   arm926ejs, at91: add common phy_reset function ... Browse Code »

    add common phy reset code into a common function.

    Signed-off-by: Heiko Schocher
    Cc: Andreas Bießmann
    Cc: Bo Shen
    Cc: Jens Scharsig
    Cc: Sergey Lapin
    Cc: Stelian Pop
    Cc: Albin Tonnerre
    Cc: Eric Benard
    Cc: Markus Hubig
    Acked-by: Jens Scharsig (BuS Elektronik)
    Tested-by: Jens Scharsig (BuS Elektronik)
    Tested-by: Bo Shen
    Acked-by: Bo Shen
    Signed-off-by: Andreas Bießmann

    Heiko Schocher
     

01 Nov, 2013

2 commits

24 Jul, 2013

2 commits

23 Jul, 2013

1 commit

19 Mar, 2013

1 commit

  • 0ce033d25   Merge branch 'master' of git://git.denx.de/u-boot-arm ... Browse Code »

    Albert's rework of the linker scripts conflicted with Simon's making
    everyone use __bss_end. We also had a minor conflict over
    README.scrapyard being added to in mainline and enhanced in
    u-boot-arm/master with proper formatting.

    Conflicts:
    arch/arm/cpu/ixp/u-boot.lds
    arch/arm/cpu/u-boot.lds
    arch/arm/lib/Makefile
    board/actux1/u-boot.lds
    board/actux2/u-boot.lds
    board/actux3/u-boot.lds
    board/dvlhost/u-boot.lds
    board/freescale/mx31ads/u-boot.lds
    doc/README.scrapyard
    include/configs/tegra-common.h

    Build tested for all of ARM and run-time tested on am335x_evm.

    Signed-off-by: Tom Rini

    Tom Rini
     

16 Mar, 2013

1 commit

  • 3929fb0a1   Replace __bss_end__ with __bss_end ... Browse Code »

    Note this is a tree-wide change affecting multiple architectures.

    At present we use __bss_start, but mostly __bss_end__. This seems
    inconsistent and in a number of places __bss_end is used instead.

    Change to use __bss_end for the BSS end symbol throughout U-Boot. This
    makes it possible to use the asm-generic/sections.h file on all
    archs.

    Signed-off-by: Simon Glass

    Simon Glass
     

13 Mar, 2013

1 commit

  • ef123c525   Refactor linker-generated arrays ... Browse Code »

    Refactor linker-generated array code so that symbols
    which were previously linker-generated are now compiler-
    generated. This causes relocation records of type
    R_ARM_ABS32 to become R_ARM_RELATIVE, which makes
    code which uses LGA able to run before relocation as
    well as after.

    Note: this affects more than ARM targets, as linker-
    lists span possibly all target architectures, notably
    PowerPC.

    Conflicts:
    arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
    arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
    arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
    board/ait/cam_enc_4xx/u-boot-spl.lds
    board/davinci/da8xxevm/u-boot-spl-da850evm.lds
    board/davinci/da8xxevm/u-boot-spl-hawk.lds
    board/vpac270/u-boot-spl.lds

    Signed-off-by: Albert ARIBAUD

    Albert ARIBAUD
     

14 Nov, 2012

1 commit

  • d858c335b   M68K: eb_cpu5282: general update and enhanced board support ... Browse Code »

    - update clock settings for higher perfomance
    - change standard baud rate to 115200
    - fix flash base address
    - remove unused defines
    - add I2C support
    - switch form board dependent flash to cfi
    - remove board dependent flash code
    - use sdram bank 0 instead of bank 1 on boot
    - enable on board frame buffer instead external
    - remove fake mac address form config
    - add watchdog support
    - add status led support

    Signed-off-by: Jens Scharsig (BuS Elektronik)
    [agust: fixed small style issues and build warning]
    Signed-off-by: Anatolij Gustschin

    Jens Scharsig (BuS Elektronik)
     

22 Oct, 2012

2 commits

  • 8b493a523   common: Discard the __u_boot_cmd section ... Browse Code »

    The command declaration now uses the new LG-array method to generate
    list of commands. Thus the __u_boot_cmd section is now superseded and
    redundant and therefore can be removed. Also, remove externed symbols
    associated with this section from include/command.h .

    Signed-off-by: Marek Vasut
    Cc: Joe Hershberger
    Cc: Mike Frysinger

    Marek Vasut
     
  • 556751427   common: Add .u_boot_list into all linker files ... Browse Code »

    Add section for the linker-generated lists into all possible linker
    files, so that everyone can easily use these lists. This is mostly
    a mechanical adjustment.

    Signed-off-by: Marek Vasut
    Cc: Joe Hershberger
    Cc: Mike Frysinger

    Marek Vasut
     

04 Sep, 2012

1 commit

01 Sep, 2012

1 commit

  • bfc325ed3   arm:at91-boards: remove console_init_f where unnecessary ... Browse Code »

    A lot of at91 boards have the console_init_f in board_init. This is useless
    cause it was called before by generic code in lib/board.c.

    Signed-off-by: Andreas Bießmann
    cc: Jens Scharsig
    cc: Stelian Pop
    cc: Sedji Gaouaou
    cc: Albin Tonnerre
    cc: Eric Benard
    Tested-by: voice.shen@atmel.com
    Tested-by: voice.shen@atmel.com
    Acked-by: Jens Scharsig (BuS Elektronik)
    Tested-by: Jens Scharsig (BuS Elektronik)

    Andreas Bießmann
     

10 Aug, 2012

1 commit

07 Jul, 2012

1 commit

07 Nov, 2011

1 commit

19 Oct, 2011

1 commit

16 Oct, 2011

1 commit

  • 464c79207   punt unused clean/distclean targets ... Browse Code »

    The top level Makefile does not do any recursion into subdirs when
    cleaning, so these clean/distclean targets in random arch/board dirs
    never get used. Punt them all.

    MAKEALL didn't report any errors related to this that I could see.

    Signed-off-by: Mike Frysinger

    Mike Frysinger
     

06 Oct, 2011

1 commit

  • e2a53458a   net: drop !NET_MULTI code ... Browse Code »

    This is long over due. All but two net drivers have been converted, but
    those have now been dropped.

    The only thing left to do is actually delete all references to NET_MULTI
    and code that is compiled when that is not defined. So here we scrub the
    core code.

    Signed-off-by: Mike Frysinger

    Mike Frysinger