Eric Lee / smarc-uboot

29 Feb, 2020

1 commit

04 Feb, 2020

1 commit

  • 7d9dbeafe   configs: am57xx_evm: Enable Android commands ... Browse Code »

    Enable Android commands that will be needed for Android 10 boot flow
    implementation, for all AM57x variants. Commands enabled:

    1. 'abootimg':
    - CONFIG_CMD_ABOOTIMG=y
    2. 'ab_select':
    - CONFIG_ANDROID_AB=y
    - CONFIG_CMD_AB_SELECT=y
    3. 'avb':
    - CONFIG_LIBAVB=y
    - CONFIG_AVB_VERIFY=y
    - CONFIG_CMD_AVB=y

    While at it, resync defconfig files with "make savedefconfig".

    Signed-off-by: Sam Protsenko
    Signed-off-by: Lokesh Vutla

    Sam Protsenko
     

23 Jan, 2020

1 commit

20 Jan, 2020

1 commit

16 Jan, 2020

1 commit

11 Jan, 2020

1 commit

  • b84acf105   dtimg/am57xx_evm_defconfig: Rename dtimg to adtimg ... Browse Code »

    Rename the existing 'dtimg' command to 'adtimg', in order to:
    - Suggest the Android origins and scope
    - Be consistent with the upcoming 'abootimg' command (naming
    suggested by Simon [*])

    The change in _not_ backward compatible, but its benefits outweigh its
    downsides, given that we don't expect active users of 'dtimg' today.

    Perform the rename in several steps:
    1. Rename *.c file and Kconfig symbol. This should allow
    'git log --follow' to properly track the history of 'adtimg.c'
    2. 's/dtimg/adtimg/g' in the internal namespace of 'adtimg.c'

    ELF comparison [**] before and after shows no functional change.

    [*] https://patchwork.ozlabs.org/patch/1182212/#2291600
    [**] diff -u
    Signed-off-by: Eugeniu Rosca
    Reviewed-by: Simon Glass
    Reviewed-by: Sam Protsenko

    Eugeniu Rosca
     

05 Dec, 2019

2 commits

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

13 Nov, 2019

1 commit

08 Nov, 2019

1 commit

12 Oct, 2019

1 commit

  • e8e683d33   board: ti: am57xx-idk: Configure the CDCE913 clock synthesizer ... Browse Code »
    12

    AM57xx-IDK boards contain the CDCE913 clock synthesizer, and their
    reset crystal capacitance load value of 10pF is wrong leading into
    lost packets in certain networking tests. Add DT data for this
    device, and probe it from the board file to program the crystal
    capacitance load value to 0pF to avoid any problems.

    Signed-off-by: Tero Kristo

    Tero Kristo
     

23 Sep, 2019

1 commit

26 Aug, 2019

1 commit

01 Aug, 2019

2 commits

05 May, 2019

1 commit

  • 623de3f08   Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SUPPORT_EMMC_BOOT

    As requested by Michal Simek , these boards
    have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated:

    xilinx_zynqmp_zc1275_revB
    xilinx_zynqmp_zc1751_xm018_dc4
    xilinx_zynqmp_zc1751_xm019_dc5
    xilinx_zynqmp_zcu100_revC
    xilinx_zynqmp_zcu102_rev1_0
    xilinx_zynqmp_zcu102_revA
    xilinx_zynqmp_zcu102_revB
    xilinx_zynqmp_zcu104_revA
    xilinx_zynqmp_zcu104_revC
    xilinx_zynqmp_zcu106_revA
    xilinx_zynqmp_zcu111_revA

    Signed-off-by: Alex Kiernan
    Acked-by: Lukasz Majewski
    Acked-by: Patrick Delaunay
    Acked-by: Ramon Fried
    Reviewed-by: Andy Shevchenko
    Tested-by: Sébastien Szymanski

    Alex Kiernan
     

30 Apr, 2019

2 commits

12 Apr, 2019

1 commit

26 Mar, 2019

1 commit

  • 14453fbfa   Convert CONFIG_SF_DEFAULT_* to Kconfig ... Browse Code »
    36

    This converts the following to Kconfig:
    CONFIG_SF_DEFAULT_BUS
    CONFIG_SF_DEFAULT_CS
    CONFIG_SF_DEFAULT_MODE
    CONFIG_SF_DEFAULT_SPEED

    I use moveconfig script and then manual check on generated u-boot.cfg
    to solve the remaining issue.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     

22 Feb, 2019

1 commit

19 Feb, 2019

1 commit

07 Feb, 2019

1 commit

  • 6d8251783   configs: Don't use SPI_FLASH_BAR as default ... Browse Code »
    12

    Now that new SPI NOR layer uses stateless 4 byte opcodes by default,
    don't enable SPI_FLASH_BAR. For SPI controllers that cannot support
    4-byte addressing, (stm32_qspi.c, fsl_qspi.c, mtk_qspi.c, ich.c,
    renesas_rpc_spi.c) add an imply clause to enable SPI_FLASH_BAR so as to
    not break functionality.

    Signed-off-by: Vignesh R
    Tested-by: Simon Goldschmidt
    Tested-by: Stefan Roese
    Tested-by: Horatiu Vultur
    Reviewed-by: Jagan Teki
    Tested-by: Jagan Teki #zynq-microzed

    Vignesh R
     

15 Jan, 2019

1 commit

08 Jan, 2019

1 commit

10 Dec, 2018

2 commits

07 Dec, 2018

1 commit

14 Nov, 2018

1 commit

04 Sep, 2018

1 commit

27 Aug, 2018

1 commit

18 Aug, 2018

2 commits

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

04 Jun, 2018

1 commit

30 May, 2018

2 commits

28 Apr, 2018

1 commit

  • f1b1f7706   Convert CONFIG_SPI to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SPI

    This partly involves updating code that assumes that CONFIG_SPI implies
    things that are specific to the MPC8xx SPI driver. For now, just update
    the CONFIG tests. This also involves reworking the default for
    CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
    reasonable default, as it does not cause any compile failures.

    Signed-off-by: Adam Ford
    Signed-off-by: Tom Rini

    Adam Ford