Eric Lee / smarc-uboot

05 Dec, 2019

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

26 Mar, 2019

1 commit

  • 14453fbfa   Convert CONFIG_SF_DEFAULT_* to Kconfig ... Browse Code »
    36

    This converts the following to Kconfig:
    CONFIG_SF_DEFAULT_BUS
    CONFIG_SF_DEFAULT_CS
    CONFIG_SF_DEFAULT_MODE
    CONFIG_SF_DEFAULT_SPEED

    I use moveconfig script and then manual check on generated u-boot.cfg
    to solve the remaining issue.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     

18 Aug, 2018

1 commit

11 Jul, 2018

1 commit

15 May, 2018

1 commit

28 Apr, 2018

1 commit

  • f1b1f7706   Convert CONFIG_SPI to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SPI

    This partly involves updating code that assumes that CONFIG_SPI implies
    things that are specific to the MPC8xx SPI driver. For now, just update
    the CONFIG tests. This also involves reworking the default for
    CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
    reasonable default, as it does not cause any compile failures.

    Signed-off-by: Adam Ford
    Signed-off-by: Tom Rini

    Adam Ford
     

09 Apr, 2018

4 commits

16 Mar, 2018

1 commit

  • 6f6b7cfa8   Convert all of CONFIG_CONS_INDEX to Kconfig ... Browse Code »
    14

    This converts the following to Kconfig:
    CONFIG_CONS_INDEX

    We have existing entries for this option in a number of places, with
    different guards on them. They're also sometimes used for things not
    directly inside of the serial driver. First, introduce a new symbol to
    guard the use of CONFIG_CONS_INDEX, so that in the case where we don't
    need this for the serial driver, but for some other use, we can still do
    it. Next, consolidate all of these into the single entry in
    drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that
    we can imply a correct value here to make the defconfig side of this
    smaller.

    Signed-off-by: Adam Ford
    [trini: Rework a lot of the logic here, such that I took authorship from
    Adam, but kept his S-o-B line]
    Signed-off-by: Tom Rini

    Tom Rini
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

13 Dec, 2017

1 commit

31 Oct, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

28 Aug, 2017

1 commit

15 Aug, 2017

1 commit

12 Aug, 2017

2 commits

08 Aug, 2017

1 commit

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

12 Jul, 2017

1 commit

23 May, 2017

1 commit

22 May, 2017

1 commit

  • a1dc980d8   Convert CONFIG_CMD_EEPROM et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_CMD_EEPROM
    CONFIG_CMD_EEPROM_LAYOUT
    CONFIG_EEPROM_LAYOUT_HELP_STRING

    Signed-off-by: Simon Glass
    Reviewed-by: Tom Rini
    [trini: Rework Kconfig logic slightly, define EEPROM location on TI eval
    platforms]
    Signed-off-by: Tom Rini

    Simon Glass
     

30 Apr, 2017

1 commit

26 Jan, 2017

1 commit

24 Oct, 2016

3 commits

12 Oct, 2016

1 commit

20 Sep, 2016

1 commit

10 Sep, 2016

1 commit

05 Aug, 2016

1 commit

  • bb6b142fc   treewide: move CONFIG_PHYS_64BIT to Kconfig ... Browse Code »

    We need to ensure that CONFIG_PHYS_64BIT is configured via Kconfig so
    that it is always available to the build system. Otherwise we can run
    into cases where we have inconsistent sizes of certain attributes.

    Ravi Babu reported offset mismatch of struct dwc3 across files since
    commit 95ebc253e6d4 ("types.h: move and redefine resource_size_t").
    Since the commit, resource_addr_t points to phys_addr_t, whose size
    is dependent on CONFIG_PHYS_64BIT for ARM architecture.

    I tried my best to use "select" where possible (for example, ARMv8
    architecture) because I think this kind of option is generally user-
    unconfigurable. However, I see some of PowerPC boards have 36BIT
    defconfigs as well as 32BIT ones. I moved CONFIG_PHYS_64BIT to the
    defconfigs for such boards.

    CONFIG_36BIT is no longer referenced, so all of the defines were
    removed from CONFIG_SYS_EXTRA_OPTIONS.

    Fixes: 95ebc253e6d4 ("types.h: move and redefine resource_size_t")
    Signed-off-by: Masahiro Yamada
    Reported-by: Ravi Babu
    Acked-by: Stefan Roese
    Reviewed-by: Tom Rini
    Reviewed-by: York Sun

    Masahiro Yamada
     

10 Jun, 2016

1 commit

26 Apr, 2016

3 commits

15 Mar, 2016

1 commit

  • 73223f0e1   Kconfig: Move CONFIG_FIT and related options to Kconfig ... Browse Code »

    There are already two FIT options in Kconfig but the CONFIG options are
    still in the header files. We need to do a proper move to fix this.

    Move these options to Kconfig and tidy up board configuration:

    CONFIG_FIT
    CONFIG_OF_BOARD_SETUP
    CONFIG_OF_SYSTEM_SETUP
    CONFIG_FIT_SIGNATURE
    CONFIG_FIT_BEST_MATCH
    CONFIG_FIT_VERBOSE
    CONFIG_OF_STDOUT_VIA_ALIAS
    CONFIG_RSA

    Unfortunately the first one is a little complicated. We need to make sure
    this option is not enabled in SPL by this change. Also this option is
    enabled automatically in the host builds by defining CONFIG_FIT in the
    image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
    be used in files that are built on the host but must also build for U-Boot
    and SPL.

    Note: Masahiro's moveconfig.py script is amazing.

    Signed-off-by: Simon Glass
    [trini: Add microblaze change, various configs/ re-applies]
    Signed-off-by: Tom Rini

    Simon Glass