Eric Lee / smarc-uboot

07 Feb, 2020

1 commit

23 Jan, 2020

1 commit

23 Dec, 2019

2 commits

05 Dec, 2019

2 commits

21 Nov, 2019

1 commit

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     

13 Nov, 2019

1 commit

27 May, 2019

2 commits

21 May, 2019

9 commits

  • 7c2e53577   mpc83xx: Migrate CONFIG_LCRR_* to Kconfig ... Browse Code »

    Migrate the CONFIG_LCRR_* settings to Kconfig.

    Signed-off-by: Mario Six

    Mario Six
     
  • 73df96a38   mpc83xx: Migrate arbiter config to Kconfig ... Browse Code »

    Migrate the arbiter configuration to Kconfig.

    Signed-off-by: Mario Six

    Mario Six
     
  • be5abb0a8   mpc83xx: Migrate HID config to Kconfig ... Browse Code »

    Mirate the HID configuration settings to Kconfig.

    Signed-off-by: Mario Six

    Mario Six
     
  • fe7d654d0   mpc83xx: Migrate CONFIG_SYS_{BR, OR}*_PRELIM to Kconfig ... Browse Code »

    Migrate the BR/OR settings to Kconfig. These must be known at compile
    time, so cannot be configured via DT.

    Configuration of this crucial variable should still be somewhat
    comfortable. Hence, make its fields configurable in Kconfig, and
    assemble the final value from these.

    Signed-off-by: Mario Six

    Mario Six
     
  • 9c5df7a2a   mpc83xx: Migrate LBLAW_* to Kconfig ... Browse Code »

    The LBLAW_* values determine the window configuration of the memory
    controller. Hence, they must be known at compile time, and cannot be
    implemented in the DT mechanism.

    Configuration of this crucial variable should still be somewhat
    comfortable. Hence, make its fields configurable in Kconfig, and
    assemble the final value from these.

    Signed-off-by: Mario Six

    Mario Six
     
  • 30915ab95   mpc83xx: Migrate BATS config to Kconfig ... Browse Code »

    The BATs (block address translation registers) determine the initial
    memory window mappings. Hence, they must be known at compile time and
    cannot be implemented in the DT mechanism.

    Configuration of this crucial variable should still be somewhat
    comfortable. Hence, make its fields configurable in Kconfig, and
    assemble the final value from these.

    Signed-off-by: Mario Six

    Mario Six
     
  • 93de25308   powerpc: Migrate HIGH_BATS to Kconfig ... Browse Code »

    Migrate the CONFIG_HIGH_BATS variable to Kconfig.

    Signed-off-by: Mario Six

    Mario Six
     
  • 21c1502a4   mpc83xx: Kconfig: Migrate HRCW to Kconfig ... Browse Code »

    The HRCW (hardware reset configuration word) is a constant that must be
    hard-coded into the boot loader image. So, it must be available at
    compile time, and cannot be migrated to the DT mechanism, but has to be
    kept in Kconfig.

    Configuration of this crucial variable should still be somewhat
    comfortable. Hence, make its fields configurable in Kconfig, and
    assemble the final value from these.

    Signed-off-by: Mario Six

    Mario Six
     
  • ff3bb0c43   mpc83xx: Get rid of CONFIG_83XX_CLKIN ... Browse Code »

    MPC83xx uses CONFIG_83XX_CLKIN instead of CONFIG_SYS_CLK_FREQ to set the
    system clock. To migrate the architecture, we can replace
    CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ.

    To do this
    * replace all occurrences of CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ
    * set CONFIG_SYS_CLK_FREQ to the old value of CONFIG_83XX_CLKIN in all
    MPC83xx config files

    Signed-off-by: Mario Six

    Mario Six
     

20 May, 2019

1 commit

  • 0e0674fca   keymile: Make distinct kmtegr1, kmvect1, suvd3 configs ... Browse Code »

    The kmtegr1, kmvect1, and suvd3 boards all use the same config include
    file with lots of #ifdefs in it.

    The Kconfig migation will become easier if we get rid of these #ifdefs
    first.

    Hence, create distinct config include files for these boards, and unwind
    the #ifdef logic in these config files to only include the options
    necessary for each board.

    Signed-off-by: Mario Six

    Mario Six
     

14 Nov, 2018

1 commit

  • cbabe7f87   configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS ... Browse Code »

    Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms
    that had been enabling it turn it on by hand. This exposed that we had
    not yet migrated CMD_MTDPARTS fully, so do so now.

    Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()")
    Signed-off-by: Tom Rini

    Tom Rini
     

20 Oct, 2018

1 commit

18 Aug, 2018

2 commits

  • 8ccf98b1c   Convert CONFIG_MISC_INIT_R to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_MISC_INIT_R

    Signed-off-by: Adam Ford
    [trini: Update the defaults logic slightly]
    Signed-off-by: Tom Rini

    Adam Ford
     
  • ca0d535ed   Migrate bootlimit to Kconfig ... Browse Code »

    Migrate boards which set bootlimit in the environment to Kconfig.

    We exclude gurnard_defconfig which includes a bootlimit=, but doesn't set
    CONFIG_BOOTCOUNT_LIMIT, so we'd fail to include a bootlimit setting
    if we migrated it.

    display5_defconfig and display5_factory_defconfig share a SYS_CONFIG_NAME,
    but only display5_defconfig enables CONFIG_BOOTCOUNT_LIMIT, so we fail to
    set bootlimit= in display5_factory_defconfig. This is okay because the
    display5_factory_defconfig doesn't need to have it set, as it is only
    meant to prepare the board in the factory.

    Environment changes for all modified configs as seen from buildman:

    boards.cfg is up to date. Nothing to do.
    Summary of 3 commits for 32 boards (8 threads, 1 job per thread)
    01: Merge git://git.denx.de/u-boot-x86
    arm: + draco etamin rastaban pxm2 display5 thuban rut
    02: Add BOOTCOUNT_BOOTLIMIT to set reboot limit
    03: Migrate bootlimit to Kconfig
    - display5_factory: bootlimit=3

    Signed-off-by: Alex Kiernan
    Reviewed-by: Lukasz Majewski

    Alex Kiernan
     

17 Apr, 2018

1 commit

09 Apr, 2018

2 commits

26 Feb, 2018

1 commit

  • 39bcbb774   bootcount: Migrate CONFIG_SYS_BOOTCOUNT_ADDR ... Browse Code »

    Migrate the users of CONFIG_SYS_BOOTCOUNT_ADDR to Kconfig. We can
    provide a default for BOOTCOUNT_AM33XX as that's a specific part of the
    RTC in use. We can also provide a default for ARCH_LS1043A and
    ARCH_LS1021A as they had been previously calculated and their symbols
    are in Kconfig. In the case of other QE-enabled platforms, they are not
    so we must update the relevant defconfig files. The previous default
    only applied in some cases, even on a specific SoC family.

    Reviewed-by: Lukasz Majewski
    Reviewed-by: Alex Kiernan
    Signed-off-by: Tom Rini

    Tom Rini
     

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

15 Feb, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Nov, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

02 Sep, 2017

1 commit

15 Aug, 2017

1 commit

01 Aug, 2017

1 commit

  • 8f1a80e99   configs: Migrate CMD_NAND* ... Browse Code »

    Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS
    CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the
    defconfig files.

    Tested-by: Adam Ford
    Signed-off-by: Tom Rini
    Reviewed-by: Bin Meng

    Tom Rini
     

25 Jul, 2017

1 commit

19 Jun, 2017

1 commit

23 May, 2017

2 commits