Eric Lee / smarc-uboot

29 Feb, 2020

1 commit

23 Jan, 2020

1 commit

05 Dec, 2019

3 commits

04 Dec, 2019

2 commits

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

13 Nov, 2019

1 commit

08 Nov, 2019

1 commit

23 Jun, 2019

1 commit

27 May, 2019

1 commit

15 May, 2019

1 commit

  • 77b508d34   net: phy: micrel: Allow KSZ8xxx and KSZ90x1 to be used together ... Browse Code »

    Commit d397f7c45b0b ("net: phy: micrel: Separate KSZ9000 drivers from
    KSZ8000 drivers") separated the KSZ8xxx and KSZ90x1 drivers and warns
    that you shouldn't select both of them due to a device ID clash between
    the KSZ9021 and the KS8721, asserting that "it is highly unlikely for a
    system to contain both a KSZ8000 and a KSZ9000 PHY". Unfortunately
    boards like the SAMA5D3xEK do contain both types of PHY, but fortunately
    the Linux Micrel PHY driver provides a solution by using different PHY
    ID and mask values to distinguish these chips.

    This commit contains the following changes:

    - The PHY ID and mask values for the KSZ9021 and the KS8721 now match
    those used by the Linux driver.
    - The warnings about not enabling both drivers have been removed.
    - The description for PHY_MICREL_KSZ8XXX has been corrected (these are
    10/100 PHYs, not GbE PHYs).
    - PHY_MICREL_KSZ9021 and PHY_MICREL_KSZ9031 no longer select PHY_GIGE
    since this is selected by PHY_MICREL_KSZ90X1.
    - All of the relevant defconfig files have been updated now that
    PHY_MICREL_KSZ8XXX does not default to 'Y'.

    Signed-off-by: James Byrne
    Acked-by: Joe Hershberger

    James Byrne
     

30 Apr, 2019

1 commit

14 Apr, 2019

3 commits

  • 0a6f625d6   configs: move CONFIG_MXC_OCOTP to Kconfig ... Browse Code »

    While commit 3e020f03e94f ("driver: misc: add MXC_OCOTP Kconfig entry")
    introduced a Kconfig entry it did not actually migrate all
    configurations to using it.

    As CONFIG_MXC_OCOTP was in mx{6/7}_common.h enable it by default on
    those architectures. Additionally, also enable it on ARCH_IMX8M and
    ARCH_VF610 where all current members enabled it through their legacy
    configuration header files.

    Signed-off-by: Marcel Ziswiler
    Reviewed-by: Lukasz Majewski

    Marcel Ziswiler
     
  • 9829b246d   defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT ... Browse Code »

    This commit updates BK4's and PCM052's config files to support as much
    as possible device tree and model in u-boot.

    Moreover, remove CONFIG_* from pcm052.h (as those are now in
    bk4|pcm052_defconfig)

    Signed-off-by: Lukasz Majewski

    Lukasz Majewski
     
  • e78f9fd2e   ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052) ... Browse Code »

    This commit provides update and renames the bk4r1.dts to vf610-bk4r1.dts
    file with more on SoC HW description.
    The pcm052.dts has been renamed to vf610-pcm052.dts as well.

    Moreover, a new vf610-pcm052.drsi file has been introduced
    to reuse the common code between devices based on Phytec's
    pcm052 modules.
    Ported from Linux kernel - v4.20 (tag)

    Signed-off-by: Lukasz Majewski

    Lukasz Majewski
     

03 Dec, 2018

1 commit

04 Sep, 2018

1 commit

18 Aug, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

09 Apr, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Nov, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

28 Aug, 2017

1 commit

15 Aug, 2017

1 commit

08 Aug, 2017

2 commits

01 Aug, 2017

1 commit

  • 8f1a80e99   configs: Migrate CMD_NAND* ... Browse Code »

    Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS
    CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the
    defconfig files.

    Tested-by: Adam Ford
    Signed-off-by: Tom Rini
    Reviewed-by: Bin Meng

    Tom Rini
     

26 Jul, 2017

1 commit

  • 2be296538   Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig ... Browse Code »
    20

    This converts the following to Kconfig:
    CONFIG_ENV_IS_IN_MMC
    CONFIG_ENV_IS_IN_NAND
    CONFIG_ENV_IS_IN_UBI
    CONFIG_ENV_IS_NOWHERE

    In fact this already exists for sunxi as a 'choice' config. However not
    all the choices are available in Kconfig yet so we cannot use that. It
    would lead to more than one option being set.

    In addition, one purpose of this series is to allow the environment to be
    stored in more than one place. So the existing choice is converted to a
    normal config allowing each option to be set independently.

    There are not many opportunities for Kconfig updates to reduce the size of
    this patch. This was tested with

    ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

    And then manual updates. This is because for CHAIN_OF_TRUST boards they
    can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
    now.

    Signed-off-by: Simon Glass
    Signed-off-by: Tom Rini

    Simon Glass
     

22 May, 2017

1 commit

  • a1dc980d8   Convert CONFIG_CMD_EEPROM et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_CMD_EEPROM
    CONFIG_CMD_EEPROM_LAYOUT
    CONFIG_EEPROM_LAYOUT_HELP_STRING

    Signed-off-by: Simon Glass
    Reviewed-by: Tom Rini
    [trini: Rework Kconfig logic slightly, define EEPROM location on TI eval
    platforms]
    Signed-off-by: Tom Rini

    Simon Glass
     

01 May, 2017

1 commit

20 Mar, 2017

2 commits

19 Mar, 2017

1 commit

  • 3a649407a   arm: Migrate SYS_THUMB_BUILD to Kconfig, introduce SPL_SYS_THUMB_BUILD ... Browse Code »
    20

    Today, we have cases where we wish to build all of U-Boot in Thumb2 mode for
    various reasons. We also have cases where we only build SPL in Thumb2 mode due
    to size constraints and wish to build the rest of the system in ARM mode. So
    in this migration we introduce a new symbol as well, SPL_SYS_THUMB_BUILD to
    control if we build everything or just SPL (or in theory, just U-Boot) in
    Thumb2 mode.

    Signed-off-by: Tom Rini
    Acked-by: Siarhei Siamashka

    Tom Rini
     

26 Jan, 2017

1 commit

27 Sep, 2016

1 commit

09 Sep, 2016

1 commit