Eric Lee / smarc-uboot

23 Jan, 2020

1 commit

05 Dec, 2019

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

23 Sep, 2019

1 commit

24 Aug, 2019

1 commit

23 Jun, 2019

1 commit

15 May, 2019

1 commit

  • 77b508d34   net: phy: micrel: Allow KSZ8xxx and KSZ90x1 to be used together ... Browse Code »

    Commit d397f7c45b0b ("net: phy: micrel: Separate KSZ9000 drivers from
    KSZ8000 drivers") separated the KSZ8xxx and KSZ90x1 drivers and warns
    that you shouldn't select both of them due to a device ID clash between
    the KSZ9021 and the KS8721, asserting that "it is highly unlikely for a
    system to contain both a KSZ8000 and a KSZ9000 PHY". Unfortunately
    boards like the SAMA5D3xEK do contain both types of PHY, but fortunately
    the Linux Micrel PHY driver provides a solution by using different PHY
    ID and mask values to distinguish these chips.

    This commit contains the following changes:

    - The PHY ID and mask values for the KSZ9021 and the KS8721 now match
    those used by the Linux driver.
    - The warnings about not enabling both drivers have been removed.
    - The description for PHY_MICREL_KSZ8XXX has been corrected (these are
    10/100 PHYs, not GbE PHYs).
    - PHY_MICREL_KSZ9021 and PHY_MICREL_KSZ9031 no longer select PHY_GIGE
    since this is selected by PHY_MICREL_KSZ90X1.
    - All of the relevant defconfig files have been updated now that
    PHY_MICREL_KSZ8XXX does not default to 'Y'.

    Signed-off-by: James Byrne
    Acked-by: Joe Hershberger

    James Byrne
     

30 Apr, 2019

2 commits

01 Feb, 2019

1 commit

19 Jan, 2019

1 commit

  • 2acc24fc2   Kconfig: Migrate BOUNCE_BUFFER ... Browse Code »

    The bounce buffer is used by a few drivers (most of the MMC drivers)
    to overcome limitations in their respective DMA implementation.

    This moves the configuration to Kconfig and makes it user-selectable
    (even though it will be a required feature to make those drivers
    work): the expected usage is for drivers depending on this to 'select'
    it unconditionally from their respective Kconfig (see follow-up
    patches).

    This commit includes a full migration using moveconfig.py to ensure
    that each commit compiles. To ensure bisectability we update
    dependencies of various drivers to now select BOUNCE_BUFFER when needed.

    [trini: Squash all patches to ensure bisectability]
    Signed-off-by: Tom Rini
    Signed-off-by: Philipp Tomsich
    Reviewed-by: Otavio Salvador [dw_mmc portion]
    Reviewed-by: Fabio Estevam [mxsmmc portion]
    Reviewed-by: Simon Glass [tegra portion]

    Philipp Tomsich
     

18 Aug, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

04 Jun, 2018

1 commit

09 Apr, 2018

2 commits

08 Apr, 2018

1 commit

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

19 Dec, 2017

1 commit

18 Nov, 2017

1 commit

  • b6251db8c   Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND ... Browse Code »
    54

    We first introduce CONFIG_USE_BOOTCOMMAND, similar to
    CONFIG_USE_BOOTARGS. We then migrate CONFIG_BOOTCOMMAND for most
    CONFIG_DISTRO_DEFAULT users. In some cases platforms have a complex
    scheme around this usage, and these have been defered for the moment so
    that platform maintainers can work on a migration plan.

    Signed-off-by: Tom Rini
    Reviewed-by: Lukasz Majewski

    Tom Rini
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

15 Aug, 2017

1 commit

08 Aug, 2017

2 commits

12 Jul, 2017

1 commit

  • 552a848e4   imx: reorganize IMX code as other SOCs ... Browse Code »

    Change is consistent with other SOCs and it is in preparation
    for adding SOMs. SOC's related files are moved from cpu/ to
    mach-imx/.

    This change is also coherent with the structure in kernel.

    Signed-off-by: Stefano Babic

    CC: Fabio Estevam
    CC: Akshay Bhat
    CC: Ken Lin
    CC: Marek Vasut
    CC: Heiko Schocher
    CC: "Sébastien Szymanski"
    CC: Christian Gmeiner
    CC: Stefan Roese
    CC: Patrick Bruenn
    CC: Troy Kisky
    CC: Nikita Kiryanov
    CC: Otavio Salvador
    CC: "Eric Bénard"
    CC: Jagan Teki
    CC: Ye Li
    CC: Peng Fan
    CC: Adrian Alonso
    CC: Alison Wang
    CC: Tim Harvey
    CC: Martin Donnelly
    CC: Marcin Niestroj
    CC: Lukasz Majewski
    CC: Adam Ford
    CC: "Albert ARIBAUD (3ADEV)"
    CC: Boris Brezillon
    CC: Soeren Moch
    CC: Richard Hu
    CC: Wig Cheng
    CC: Vanessa Maegima
    CC: Max Krummenacher
    CC: Stefan Agner
    CC: Markus Niebel
    CC: Breno Lima
    CC: Francesco Montefoschi
    CC: Jaehoon Chung
    CC: Scott Wood
    CC: Joe Hershberger
    CC: Anatolij Gustschin
    CC: Simon Glass
    CC: "Andrew F. Davis"
    CC: "Łukasz Majewski"
    CC: Patrice Chotard
    CC: Nobuhiro Iwamatsu
    CC: Hans de Goede
    CC: Masahiro Yamada
    CC: Stephen Warren
    CC: Andre Przywara
    CC: "Álvaro Fernández Rojas"
    CC: York Sun
    CC: Xiaoliang Yang
    CC: Chen-Yu Tsai
    CC: George McCollister
    CC: Sven Ebenfeld
    CC: Filip Brozovic
    CC: Petr Kulhavy
    CC: Eric Nelson
    CC: Bai Ping
    CC: Anson Huang
    CC: Sanchayan Maity
    CC: Lokesh Vutla
    CC: Patrick Delaunay
    CC: Gary Bisson
    CC: Alexander Graf
    CC: u-boot@lists.denx.de
    Reviewed-by: Fabio Estevam
    Reviewed-by: Christian Gmeiner

    Stefano Babic
     

30 Apr, 2017

1 commit

14 Mar, 2017

1 commit

19 Feb, 2017

1 commit

28 Jan, 2017

3 commits

26 Jan, 2017

1 commit

24 Jan, 2017

1 commit

22 Jan, 2017

1 commit

30 Dec, 2016

1 commit

16 Dec, 2016

2 commits

29 Nov, 2016

1 commit

  • 792f18684   mx6sx: Add initial support for UDOO Neo Board ... Browse Code »

    UDOO Neo Board is a development board from Seco that has three models:
    - UDOO Neo Basic
    - UDOO Neo Basic Kick Starter
    - UDOO Neo Extended
    - UDOO Neo Full

    All versions are based on the i.MX6 SoloX processor.

    For more details about the UDOO Neo board, please refer to:
    http://www.udoo.org/udoo-neo/

    This work is based on a previous commit of Francesco Montefoschi
    :
    https://github.com/fmntf/u-boot/commit/877b71184a5105e708024f232d36aed574961844

    Only tested on the UDOO Neo Full board.

    Signed-off-by: Breno Lima
    Reviewed-by: Fabio Estevam

    Breno Lima