24 May, 2019
5 commits
-
uuu can download whole uboot and run it
fastboot also enabled.Signed-off-by: Frank Li
(cherry picked from commit 21ce8ab67d0a8eae3df91b074ffad9fb4b987961)
Signed-off-by: Ye Li -
Enable the mtest command and add relevant configurations for tested memory
range to all ARM2 boards and EVK board.Signed-off-by: Ye Li
(cherry picked from commit bb3dfa130dd0af57dfe7a41869f6ecd843e6c558)
(cherry picked from commit 26aab18d03486fdf088e38f7ee3b1588b7b01e5f) -
Enable the SPL SDP driver and SPL gadget drivers on iMX8MQ DDR4 and
DDR3L validation boards.Signed-off-by: Ye Li
-
Because the iMX8MQ DDR4 ARM2 has 4GB DDR. To fit new MMU settings, we split
it to two banks. The first bank has 3GB DDR, reach to 4GB memory map.
The second bank has 1GB DDR, is beyond 4GB memory map.Notice: there is no OPTEE for ARM2 board. The trust zone setting in OPTEE
for iMX8MQ EVK is not match with DDR size on ARM2 board. So ARM2 Only can
work without OPTEE.Signed-off-by: Ye Li
Reviewed-by: Peng Fan -
Add board codes, configurations, DTS and DDR initialization codes for the
DDR3L and DDR4 ARM2 boards.Supported modules
- DDR3L ARM2: Two RANK DDR3L, QSPI B, eMMC/SD, RMII ENET, UART.
- DDR4 ARM2: Two RANK DDR4, SD, NAND, RGMII ENET, UART.
NAND read/write/erase is ok in u-boot, NAND SPL boot will be tested later
when tool is ready.Signed-off-by: Ye Li
Acked-by: Peng Fan
(cherry picked from commit 3c3a9e90faa2c3bbb1bcd9adac5915cfd6f2f204)