Eric Lee / smarc-uboot

29 Feb, 2020

1 commit

23 Jan, 2020

1 commit

05 Dec, 2019

3 commits

04 Dec, 2019

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

13 Nov, 2019

1 commit

23 Sep, 2019

1 commit

27 May, 2019

1 commit

21 May, 2019

9 commits

  • 7c2e53577   mpc83xx: Migrate CONFIG_LCRR_* to Kconfig ... Browse Code »

    Migrate the CONFIG_LCRR_* settings to Kconfig.

    Signed-off-by: Mario Six

    Mario Six
     
  • 73df96a38   mpc83xx: Migrate arbiter config to Kconfig ... Browse Code »

    Migrate the arbiter configuration to Kconfig.

    Signed-off-by: Mario Six

    Mario Six
     
  • be5abb0a8   mpc83xx: Migrate HID config to Kconfig ... Browse Code »

    Mirate the HID configuration settings to Kconfig.

    Signed-off-by: Mario Six

    Mario Six
     
  • fe7d654d0   mpc83xx: Migrate CONFIG_SYS_{BR, OR}*_PRELIM to Kconfig ... Browse Code »

    Migrate the BR/OR settings to Kconfig. These must be known at compile
    time, so cannot be configured via DT.

    Configuration of this crucial variable should still be somewhat
    comfortable. Hence, make its fields configurable in Kconfig, and
    assemble the final value from these.

    Signed-off-by: Mario Six

    Mario Six
     
  • 9c5df7a2a   mpc83xx: Migrate LBLAW_* to Kconfig ... Browse Code »

    The LBLAW_* values determine the window configuration of the memory
    controller. Hence, they must be known at compile time, and cannot be
    implemented in the DT mechanism.

    Configuration of this crucial variable should still be somewhat
    comfortable. Hence, make its fields configurable in Kconfig, and
    assemble the final value from these.

    Signed-off-by: Mario Six

    Mario Six
     
  • 30915ab95   mpc83xx: Migrate BATS config to Kconfig ... Browse Code »

    The BATs (block address translation registers) determine the initial
    memory window mappings. Hence, they must be known at compile time and
    cannot be implemented in the DT mechanism.

    Configuration of this crucial variable should still be somewhat
    comfortable. Hence, make its fields configurable in Kconfig, and
    assemble the final value from these.

    Signed-off-by: Mario Six

    Mario Six
     
  • 93de25308   powerpc: Migrate HIGH_BATS to Kconfig ... Browse Code »

    Migrate the CONFIG_HIGH_BATS variable to Kconfig.

    Signed-off-by: Mario Six

    Mario Six
     
  • 21c1502a4   mpc83xx: Kconfig: Migrate HRCW to Kconfig ... Browse Code »

    The HRCW (hardware reset configuration word) is a constant that must be
    hard-coded into the boot loader image. So, it must be available at
    compile time, and cannot be migrated to the DT mechanism, but has to be
    kept in Kconfig.

    Configuration of this crucial variable should still be somewhat
    comfortable. Hence, make its fields configurable in Kconfig, and
    assemble the final value from these.

    Signed-off-by: Mario Six

    Mario Six
     
  • ff3bb0c43   mpc83xx: Get rid of CONFIG_83XX_CLKIN ... Browse Code »

    MPC83xx uses CONFIG_83XX_CLKIN instead of CONFIG_SYS_CLK_FREQ to set the
    system clock. To migrate the architecture, we can replace
    CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ.

    To do this
    * replace all occurrences of CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ
    * set CONFIG_SYS_CLK_FREQ to the old value of CONFIG_83XX_CLKIN in all
    MPC83xx config files

    Signed-off-by: Mario Six

    Mario Six
     

20 May, 2019

1 commit

  • 16aaca214   mpc83xx: Make distinct MPC8313ERDB targets ... Browse Code »

    MPC8313ERDB has the option of either enabling NOR or NAND boot in its
    config file (by commenting out certain #ifdefs). To keep this ability
    after migrating options to Kconfig, we introduce two MPC8313ERDB
    configs: one for NOR, and one for NAND.

    Signed-off-by: Mario Six

    Mario Six
     

30 Apr, 2019

1 commit

20 Oct, 2018

1 commit

18 Aug, 2018

1 commit

04 Jun, 2018

1 commit

15 May, 2018

1 commit

17 Apr, 2018

1 commit

09 Apr, 2018

2 commits

08 Apr, 2018

1 commit

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

15 Feb, 2018

1 commit

  • 75670c81e   configs: Migrate CONFIG_SPL_FRAMEWORK ... Browse Code »

    Migrate the option CONFIG_SPL_FRAMEWORK and make this gate most of the
    current set of options we have in Kconfig. We will need to have some
    options available for SPL and !SPL_FRAMEWORK so this is important. In a
    few cases we re-order existing options so that we have less escapes from
    the SPL_FRAMEWORK guard.

    Signed-off-by: Tom Rini

    Tom Rini
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

27 Jan, 2018

1 commit

06 Nov, 2017

1 commit

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

28 Aug, 2017

1 commit

15 Aug, 2017

1 commit

12 Aug, 2017

2 commits